MEGUIAR'S G127 User Manual

G127, NXT Generation Tech Wax 2.0 (22-175A): G12718
__________________________________________________________________________________________
Page: 1 of 19
Safety Data Sheet
Copyright, 2014, Meguiar's, Inc. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilising Meguiar's, Inc. products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from Meguiar's, Inc., and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
26-6715-2
Version number:
3.00
Revision date:
25/02/2014
Supersedes date:
13/09/2012
Transportation version number: 1.00 (06/09/2010)
This Safety Data Sheet has been prepared in accordance with the REACH Regulation (EC) 1907/2006 and its modifications.
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
G127, NXT Generation Tech Wax 2.0 (22-175A): G12718
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses
Automotive.
1.3. Details of the supplier of the substance or mixture Address:
Meguiars United Kingdon Limited, 3 Lamport Court, Heartlands, Daventry, Northants, NN11 8UF
Telephone:
+44 (0)870 241 6696
E Mail:
info@meguiars.co.uk
Website:
www.meguiars.co.uk
1.4. Emergency telephone number
+44 (0)870 241 6696
SECTION 2: Hazard identification
2.1. Classification of the substance or mixture
CLP REGULATION (EC) No 1272/2008
CLASSIFICATION:
Skin Corrosion/Irritation, Category 2 - Skin Irrit. 2; H315 Specific Target Organ Toxicity-Repeated Exposure, Category 1 - STOT RE 1; H372
For full text of H phrases, see Section 16.
Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive Indication of danger
Harmful; Xn; R48/20
For full text of R phrases, see Section 16.
G127, NXT Generation Tech Wax 2.0 (22-175A): G12718
__________________________________________________________________________________________
Page: 2 of 19
2.2. Label elements
CLP REGULATION (EC) No 1272/2008
SIGNAL WORD
DANGER!
Symbols:
GHS07 (Exclamation mark) | GHS08 (Health Hazard) |
Pictograms
Ingredient CAS Nbr % by Wt C10-13-iso-Alkanes 64742-88-7 7 - 13
HAZARD STATEMENTS:
H315 Causes skin irritation.
H372 Causes damage to organs through prolonged or repeated exposure: nervous system
PRECAUTIONARY STATEMENTS General:
P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children.
Prevention:
P260 Do not breathe dust/fume/gas/mist/vapours/spray. P262 Do not get in eyes, on skin, or on clothing.
Response:
P332 + P313 If skin irritation occurs: Get medical advice/attention. P331 Do NOT induce vomiting. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTRE or doctor/physician.
Disposal:
P501 Dispose of contents/container in accordance with applicable local/regional/national/international
regulations.
SUPPLEMENTAL INFORMATION
Supplemental Hazard Statements:
EUH208 Contains Mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-
isothiazolin-3-one (3:1). May produce an allergic reaction.
4% of the mixture consists of components of unknown acute oral toxicity.
Contains 100% of components with unknown hazards to the aquatic environment.
Notes on labelling
H304 is not required on the label due to the product's viscosity
G127, NXT Generation Tech Wax 2.0 (22-175A): G12718
__________________________________________________________________________________________
Page: 3 of 19
Nota P applied to CAS 8052-41-3.
Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive
Symbol(s)
Harmful
Contains:
C10-13-iso-Alkanes
Risk phrases
R48/20 Harmful: danger of serious damage to health by prolonged exposure through inhalation.
Safety phrases
S23A Do not breathe vapour. S51 Use only in well ventilated areas. S24 Avoid contact with skin. S62 If swallowed, do not induce vomiting: Seek medical advice immediately and show this container or
label.
S2 Keep out of the reach of children.
Notes on labelling
R65 is not required on the label due to the product's viscosity.
Nota P applied to CASRN 8052-41-3.
2.3. Other hazards
None known.
SECTION 3: Composition/information on ingredients
Ingredient CAS Nbr EU Inventory % by Wt Classification
Non-Hazardous Ingredients Mixture 50 - 70 C10-13-iso-Alkanes 64742-88-7 EINECS 265-
191-7
7 - 13 Xn:R48/20; Xn:R65 (EU)
Xi:R38; R10 (Self Classified)
Asp. Tox. 1, H304; STOT RE 1, H372 (CLP) Flam. Liq. 3, H226; Skin Irrit. 2, H315 (Self Classified)
Distillates (petroleum), hydrotreated light 64742-47-8 EINECS 265-
149-8
5 - 10 Xn:R65 - Nota 4 (EU)
R10; R66; R67 (Self Classified)
Asp. Tox. 1, H304 (CLP) Flam. Liq. 3, H226; STOT SE 3,
H336; EUH066 (Self Classified) Siloxanes and silicones, di-Me 63148-62-9 1 - 5 Ceramic materials and wares, chemicals 66402-68-4 EINECS 266-
340-9
1 - 5
Organic Salt (NJTSR# 04499600-6842) Trade Secret 1 - 5 Conditioners Trade Secret < 5
G127, NXT Generation Tech Wax 2.0 (22-175A): G12718
__________________________________________________________________________________________
Page: 4 of 19
Siloxanes and silicones, Di-Me, [[[3-[(2­aminoethyl)amino]propyl]dimethoxysilyl]o xy]-terminated
71750-80-6 0.5 - 1.5 Xn:R22 (Self Classified)
Acute Tox. 4, H302 (Self
Classified) White Mineral Oil (Petroleum) 8042-47-5 EINECS 232-
455-8
0.1 - 1 Xn:R65 (Self Classified)
Asp. Tox. 1, H304 (Self
Classified) Stoddard solvent 8052-41-3 EINECS 232-
489-3
0.1 - 1 Xn:R48/20; Xn:R65 - Nota P (EU) Xi:R38 (Self Classified)
Asp. Tox. 1, H304; STOT RE 1, H372 - Nota P (CLP) Skin Irrit. 2, H315 (Self Classified)
Mixture of: 5-chloro-2-methyl-4­isothiazolin-3-one and 2-methyl-4­isothiazolin-3-one (3:1)
55965-84-9 < 0.001 T:R23-24-25; C:R34; N:R50/53;
R43 (EU)
Acute Tox. 3, H331; Acute Tox. 3, H311; Acute Tox. 3, H301; Skin Corr. 1B, H314; Skin Sens. 1A, H317; Aquatic Acute 1, H400,M=10; Aquatic Chronic 1, H410,M=10 (CLP)
Please see section 16 for the full text of any R phrases and H statements referred to in this section Please refer to section 15 for the any applicable Notas that have been applied to the above components
For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation
Remove person to fresh air. If you feel unwell, get medical attention.
Skin contact
Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention.
Eye contact
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention.
If swallowed
Rinse mouth. If you feel unwell, get medical attention.
4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1 Information on toxicological effects
4.3. Indication of any immediate medical attention and special treatment required
Not applicable
SECTION 5: Fire-fighting measures
G127, NXT Generation Tech Wax 2.0 (22-175A): G12718
__________________________________________________________________________________________
Page: 5 of 19
5.1. Extinguishing media
In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.
5.2. Special hazards arising from the substance or mixture
None inherent in this product.
Hazardous Decomposition or By-Products
Substance Condition
Formaldehyde During combustion. Carbon monoxide. During combustion. Carbon dioxide. During combustion. Irritant vapours or gases. During combustion.
5.3. Advice for fire-fighters
No unusual fire or explosion hazards are anticipated.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Evacuate area. Ventilate the area with fresh air. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment.
6.2. Environmental precautions
Avoid release to the environment. For larger spills, cover drains and build dykes to prevent entry into sewer systems or bodies of water.
6.3. Methods and material for containment and cleaning up
Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorised person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and Safety Data Sheet. Seal the container. Dispose of collected material as soon as possible.
6.4. Reference to other sections
Refer to Section 8 and Section 13 for more information
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid contact with oxidising agents (eg. chlorine, chromic acid etc.)
7.2. Conditions for safe storage including any incompatibilities
Store in a well-ventilated place. Keep container tightly closed. Store away from heat. Store away from acids. Store away from oxidising agents.
7.3. Specific end use(s)
See information in Section 7.1 and 7.2 for handling and storage recommendations. See Section 8 for exposure controls and personal protection recommendations.
SECTION 8: Exposure controls/personal protection
G127, NXT Generation Tech Wax 2.0 (22-175A): G12718
__________________________________________________________________________________________
Page: 6 of 19
8.1 Control parameters
Occupational exposure limits
No occupational exposure limit values exist for any of the components listed in Section 3 of this Safety Data Sheet.
8.2. Exposure controls
8.2.1. Engineering controls
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment.
8.2.2. Personal protective equipment (PPE)
Eye/face protection
Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended: Safety glasses with side shields.
Skin/hand protection
Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Gloves made from the following material(s) are recommended: Neoprene.
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapours and particulates
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties Physical state
Liquid.
Appearance/Odour
Sweet, pleasant odour; Creamy, ivory liquid
Odour threshold
No data available.
pH
8 - 9
Boiling point/boiling range
100 ºC
Melting point
Not applicable.
Flammability (solid, gas)
Not applicable.
Explosive properties
Not classified
Oxidising properties
Not classified
Flash point
Flash point > 93 °C (200 °F)
Autoignition temperature
No data available.
Flammable Limits(LEL)
No data available.
Flammable Limits(UEL)
No data available.
Vapour pressure
No data available.
Relative density
0.9 - 1 [Ref Std:WATER=1]
Loading...
+ 13 hidden pages