Megger NET200 Specifications
NET200
Network Performance Tester
Evaluate the capability of link connections
and locate faults up to 500 meters
Detect Wiremap failure (Pass/Fail)
RJ45 and BNC connectors
10BASE-T and 100BASE-TX Ethernet, half- or
full- duplex support
1000BASE-T, Auto measurement of signal
performance, wiremap and length
1 kHz analogue tone signal output suitable
for all probe sets
NET200
Network Performance Tester
DESCRIPTION
The NEW Megger NET200 is an all-in-one and easy-to-use
network testing unit measuring logical network performance
and the physical condition of network cables. It is the tool of
choice, allowing network engineers to install and efficiently
maintain local area network (LAN) with 10BASE-T and/or
100BASE-TX based Ethernet protocol.
FEATURES
The NET200 measures logical network performance. It
provides round-trip time (RTT) testing to measure network
speed under dynamic and static configuration protocols
and IP scanning to show the information on all terminals
connected with the local network. It can also evaluate the
capability of link connections such as supported network
speed (10BASE-T or 100BASE-TX) and duplexity (half- or fullduplex).
The device provides physical information for the LAN cable
under tests such as cable length, faulty positions (open or
short) and Wiremap (Pass/Fail).
With the novel high-resolution graphic TDR (Time-Domain
Reflectometer) and TDX (Time-Domain Crosstalk), it is
possible for the user to locate faulty positions along cables up
to 500 meters in length.
The TDR and TDX can also be used with other types of cable,
such as coaxial cables for cable TV and HFC networks and
telephony cables.
In addition, the NET200 presents tone generating functionality,
used to identify cable connections and to trace cables in
partition and stud walls, floors and ceilings, and a continuity
testing function to check the continuity of a cable.
With the graphic user interface displayed on a 128 x 64 LCD
and serial communication port, field engineers can easily
carry out the required network testing, transfer the stored
data to their PC and print reports using the NET200 emulation
software supplied.
BENEFITS
The NET200 is housed in a tough and durable ABS enclosure
and powered by a Li-Ion re-chargeable battery with a typical
6-hour battery life.
The NET200 is supplied as a kit comprising a complete set
of testing cables and adapters, and has one of the largest
selection of functions available in its class. This makes the
NET200 one of the best feature to value instruments on the
market today.
NET200
Network Performance Tester
SPECIFICATIONS
(* Except where otherwise stated, these specifications apply to an
ambient temperature of 20 ºC (68 ºF))
COAX measurement
Graphic TDR / numeric TDR (selectable)
Minimum display resolution : 10 Cm @ VOP 66.7%
Measurement range : up to 1 km (graphic), 5 m to 500 m
(numeric)
Distance accuracy : ±4% of reading or 0.5 m
LAN measurement
Distance measurement
Graphic, numeric TDR / graphic TDX
Minimum display resolution : 10 Cm @ VOP 66.7%
Measurement range : up to 300 m (graphic), 5 m to 300 m
(numeric)
Distance accuracy : ±4% of reading or 0.5 m
Wiremap
Pass/Fail
Crosstalk
Crosstalk test per 10 base-T, 100 base-TX, 1000 base-T
Impedance
Graphic display for an approximate impedance
Continuity
Measurement of continuity lines
Automatic measurement
Carries out the following tests sequentially to collect a
network’s physical information
1000, 100, 10base T, wiremap only
Length, wiremap, signal performance (crosstalk)
Network analysis
Measures round-trip time
Link partner ability test (10 M half, 10 M full, 100 M half, 100M full)
Supports 10 M half, 10 M full, 100 M half, 100 M full, duplex
IP scan (IP/MAC-address/netbios name)
Additional features
Tone generation
1 kHz analogue tone signal output
Display
2.5” (128 x 64) mono graphic LCD
Storage Slots
100 ea (automatic test output), over 20 ea (TDR waveform)
External interface
USB (provided USB-only cable )
Power
11.1 V (Li-Ion, 1800 mAh)
15 V/1 A AC-DC adapter
Operating time : 6 hours
Recharge time : 4 hours
Environment
Operating temperature : 15 ºC ~ +55 ºC
Storage temperature : -20 ºC~ +70 ºC
Humidity: 95%
Safety
EN61010-1
Weight 550 gms
Dimensions 210 mm x 100 mm x 45 mm
ORDERING INFORMATION
Item (Qty) Cat. No.
1 x NET200 MTDR 1002-856
Included accessories
1 x AC-DC Power adapter 2003-184
1 x BNC to F-connector 2003-181
1 x RS232 to USB adapter cable 2003-183
1 x DC Car charge lead 2003-200
1 x Portable bag 2003-189
1 x Pouch 2003-191
3 x Power cord (US, EU, UK) 2003-187
1 x Remote identifier #1 2003-180
UK
Archcliffe Road Dover
CT17 9EN England
T +44 (0) 1304 502101
F +44 (0) 1304 207342
UKsales@megger.com
UNITED STATES
4271 Bronze Way
Dallas TX 75237-1019 USA
T 800 723 2861 (USA only)
T +1 214 333 3201
F +1 214 331 7399
USsales@megger.com
OTHER TECHNICAL SALES OFFICES
Valley Forge USA, College Station USA, Sydney
AUSTRALIA, Täby SWEDEN, Ontario CANADA,
Trappes FRANCE, Oberursel GERMANY, Aargau
SWITZERLAND, Kingdom of BAHRAIN, Mumbai
INDIA, Johannesburg SOUTH AFRICA, Chonburi
THAILAND, Malaga SPAIN
Item (Qty) Cat. No.
Optional accessories
Remote identifier #2 2003-193
Remote identifier #3 2003-194
Remote identifier #4 2003-195
Remote identifier #5 2003-196
Remote identifier #6 2003-197
Remote identifier #7 2003-198
Remote identifier #8 2003-199
Mobile printer 2003-201
CERTIFICATION ISO
Registered to ISO 9001:2008 Cert. no. Q 09250
Registered to ISO 14001-2004 Cert. no. EMS 61597
NET200_DS_en_V01
www.megger.com
Megger is a registered trademark
Loading...