Megger MIT510-2, MIT1020-2 Operating Manual

Test Leads

5-kV and 10-kV Insulation Resistance Testers

Test Leads

5-kV & 10-kV Insulation Resistance Testers

MIT510/2

5-kV Model

MIT520/2

5-kV Model

MIT1020/2

10-kV Model

DESCRIPTION

Megger offers a range of lead sets and clips of various
sizes and electrical characteristics for use with MIT510/2,
MIT520/2 and MIT1020/2 insulation resistance testers,
enabling the user to choose the most applicable lead set
for the work in hand. In all cases it is the responsibility of
the user to use safe working practices and verify that the
system is safe before connection. Even isolated systems

n

Wide range of lead sets and clips from the

leader in insulation resistance testing

n

Facilitates connection to a variety of

de-energized systems

n

Used with Megger 5-kV and 10-kV

insulation resistance testers

may exhibit significant capacitance which will become
highly charged during the application of the insulation test.
This charge can be lethal and connections, including the
leads and clips, should never be touched during the test.

Note: the Compact Test Clips (8101-181, 8101-182,
8101-183) can be used with MJ15 and BM15 as well as
the MIT510/2, MIT520/2 and MIT1020/2.

Large Test Clips

These clips are designed for clamping on larger diameter
test pieces. The insulation is designed only to protect the
user from the output of Megger 5-kV and 10-kV insulation
resistance testers and systems below 1 kV to the category
rating of 1000 V ac. The clips cannot in any circumstance
be relied on to protect the user from live systems above
1 kV ac.

Medium Test Clips

These clips are designed for clamping on larger diameter
test pieces but where space is at a premium. The insulation
is designed only to protect the user from the output
of Megger 5-kV and 10-kV (set below 6 kV) insulation
resistance testers. The clips cannot in any circumstance be
relied on to protect the user from live ac systems.

Test Leads

5-kV and 10-kV Insulation Resistance Testers

Compact Test Clips

These clips are designed for clamping on test pieces where
access is limited. There is no insulation on these clips.
Extreme care must be taken to avoid electric shock when
connecting/disconnecting due to the bare metallic clips.

Control Circuit Test Clips

These clips are designed for testing low voltage circuits
with test voltages up to 1 kV. The insulation is designed
only to protect the user from the output of Megger 5-kV
and 10-kV insulation resistance testers set to a maximum
output voltage of 1 kV. Do not use this lead set at voltages
above 1 kV.

ORDERING INFORMATION

Type Large Test Clip Medium Test Clip Compact Test Clip Control Circuit Test Clips
Cat. No. 6220-811 6220-820 8101-181/8101-182/ 6220-822
8101-183

Dimensions, 8.7 x 5.2 in. 5.4 x 2.9 in. 2.2 x 1 in. 2.2 x 1 in.
Closed (220 x 134 mm) (139 x 73 mm) (58 x 25 mm) (58 x 25 mm)

Lead Length 10 ft (3 m) 10 ft (3 m) 210968: 10 ft (3 m) 10 ft (3 m)
EV6121-451: 25 ft (8 m)
EV6121-452: 50 ft (15 m)

Jaw Opening, 1.3 in. (34 mm) 1.3 in. (34 mm) .7 in. (18 mm) .8 in. (20 mm)
Dia. max.

Number in Set 3 3 3 2

Insulation Rating
Basic 10 kV dc 6 kV dc None 1 kV dc (Prod or Clip)

Double 5 kV dc 3 kV dc None N/A

CAT Rating 1000 V ac CAT IV 1000 V ac CAT IV N/A N/A

UK

Archcliffe Road, Dover
CT17 9EN England
T [phone]
F [phone]
[e-mail]

UNITED STATES

4271 Bronze Way
Dallas, TX 75237-1019 USA
T 1 800 723 2861 (USA only)
T [phone]
F [phone]
[e-mail]

OTHER TECHNICAL SALES OFFICES

Valley Forge USA, College Station
USA, Sydney AUSTRALIA, Täby
SWEDEN, Ontario CANADA, Trappes
FRANCE, Oberursel GERMANY, Aargau
SWITZERLAND, Kingdom of BAHRAIN,
Mumbai INDIA, Johannesburg SOUTH
AFRICA, and Chonburi THAILAND

ISO STATEMENT

Registered to ISO 9001:2000 Cert. no. Q09290

Registered to ISO 14001-1996 Cert. no. EMS61597

MIT5-10kV_TL_DS_enUS_V02

www.megger.com
Megger is a registered trademark