Megger MIT485 Quick Start Guide

MIT485/2TC

Quick Start Guide

MEASURING VOLTAGE using 2 test leads

; 0	♦	3
T@ R

Megger..

5 Commonwealth Ave

Woburn, MA 01801

Phone [phone] Toll

Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

-----------RING ----	--­
TIP

A\. If the display doesn't show that the T R- terminals are l,ll active, press the T-G-R button to change the mode.

TEST THE PAIR FOR ALTERNATING CURRENT AND DIRECT CURRENT VOLTAGE

TIP to RING

RING

IC=Ill=M=M=IMCM

c:w::wc:WW--

TIP

RING to GROUND

.,!,.

TIP to GROUND

-!-

MEASURING VOLTAGE using 3 test leads

2 3

; 0 ;

T@ R

For all 3 setup configurations: VAc< 10 = Proceed to the next test VAc 10 = Fault must be cleared

VDc < 3 = Proceed to the next test VDc 3 = Fault must be cleared

MEASURING CONTINUITY

1	2	3		.....,._____
		-----
			=ill= = = =-
			RING
			TIP
MEASURING INSULATION RESISTANCE
	2	3		4
		------			Press TEST
		RING
		TIP			and release

Test Equipment Depot - 800.517.8431 - 5 Commonwealth Ave, MA 01801

TestEquipmentDepot.com