Page 1
DLRO TEST LEADS
Digital Microhmmeter
DUPLEX PROBES
DLRO TEST LEADS
Digital Microhmmeter
6111-022 DH1
2.5m/8 inch Duplex handspikes (2 incl.) with helical sprung
contacts.
6111-023 DH2
m/20 inch as DH1 but only 1 included
6
6111-024 DH3
9.0m as DH1 but only 1 included
Description
Duplex handspikes with sprung loaded tips that both
compress and rotate, to ensure good contact. Maximum
current capacity 20 A for DH1, 10 A for longer lead lengths.
10mm spacing between P and C tips on each probe.
Will fit:
BT51, 247000 series, DLRO10 and DLRO10X
6111-503 DH4
1.2m Duplex handspikes (2 off), one with indicator lights
6111-517 DH5 - as DH4, 2.5m
6111-518 DH6 - as DH4, 600 V rated
Description
Duplex handspikes with sprung loaded tips. One probe
has lights that operate with the DLRO10 for connection
indication and live warning. With the DLRO10X, can indicate
test limit pass/fail.
Maximum current capacity 10 A.
6mm spacing between P and C tips on each probe.
Will fit:
BT51 (not using indicator lights)
247000 series (not using indicator lights)
DLRO10 and 10X (DH4 supplied as standard)
e parts
Spar
25940-012 Replacement tips for DH4, 5 & 6 handspikes -
needle
25940-014
Replacement tips for DH4, 5 & 6 handspikes serrated
Page 2
DLRO TEST LEADS
igital Microhmmeter
D
42003-7 Heavy duty fixed point hand spikes -
2
replaceable tips
2m leads
242002-30 Heavy duty fixed point hand spikes
m leads
9
Description
Lightweight and built for durability. Spikes are not spring
loaded.
Rated 10 A.
9mm spacing between C and P probe tips.
Spare parts
Replaceable needle points.
5119
Will fit:
BT51, DLRO10, DLRO10X and 247000 series.
242002-7 Heavy duty fixed point hand spikes
2m leads
242002-30 Heavy duty fixed point hand spikes
9m leads
KELVIN CLIPS AND CLAMPS
Description
Lightweight and built for durability. Spikes are not spring
loaded.
Rated 10 A.
9mm spacing between C and P probe tips.
Will fit:
BT51, DLRO10, DLRO10X and 247000 series.
241005-7 Kelvin Clips
2m leads - gold plated clips
Description
elvin clips, cur
K
connection to other jaw. Clips have 1.3 cm. jaw capacity. Easy
connection to cables and small wires.
Rated to 10 A.
Gold plated clips for good contact and reduction in thermal
EMFs
Will fit:
BT51, DLRO10, DLRO10X and 247000 series
rent connection to one jaw
, potential
Page 3
LRO TEST LEADS
D
Digital Microhmmeter
242005-7 Kelvin Clips
2m leads - Silver plated clips
Description
elvin clips, current connection to one jaw, potential
K
connection to other jaw. Clips have 1.3 cm. jaw capacity. Easy
connection to cables and small wires.
Rated to 10 A.
Will fit:
T51, DLRO10, DLRO10X and 247000 series
B
242006-7 Kelvin Clips
2m leads
242006-18 Kelvin Clips
5.5m leads
242006-30 Kelvin Clips
9m leads
Description
Kelvin clips, current connection to one jaw, potential
connection to other jaw. Clips have 4 cm. jaw capacity. Easy
connection to cables and small wires.
Rated to 10 A.
Will fit:
BT51, DLRO10, DLRO10X and 247000 series.
242004-7 Heavy duty C-clamps
2m leads
242004-18 Heavy duty C-clamps
5.5m leads
242004-30 Heavy duty C-clamps
9m leads
Description
Kelvin clamps, current passes through the C-clamp and
screw thread, the potential passes through a four point anvil
insulated from the clamp.
Clamps have a capacity of 5 cm and cur
Will fit:
BT51, DLRO10, DLRO10X and 247000 series.
rent rating of 10 A.
Page 4
SEPARATE CURRENT AND POTENTIAL LEADS
DLRO TEST LEADS
Digital Microhmmeter
242104-2-16 Heavy duty C-clamps
5m leads
242104-2-26 Heavy duty C-clamps
m leads
8
Description
Kelvin clamps, current passes through the C-clamp and
screw thread, the potential passes through a four point anvil
nsulated from the clamp.
i
lamps have a capacity of 10 cm and current rating of 100 A.
C
Will fit:
DLRO200 and DLRO600 only to 100A.
247120
242041-7 Current clip leadset
2m leads
242041-18 Current clip leadset
5.5m leads
242041-30 Current clip leadset
9m leads
Description
Used in combination with 242021 potential leads.
Separates the C and P connections.
Rated 10 A.
Will fit:
BT51, DLRO10, DLRO10X and 247000 series.
242021-7 Potential spike leadset
2m leads
242021-18 Potential spike leadset
5.5m leads
242021-30 Potential spike leadset
9m leads
Description
Used in combination with 2420041 current leads.
Separates the C and P connections.
Will fit:
BT51, DLRO10, DLRO10X and 247000 series.
Page 5
HIGH CURRENT LEADSETS
DLRO TEST LEADS
Digital Microhmmeter
220-755 5m Lead set
6
2 x 50 mm2current leads with clamps and 2 x potential leads
with clips.
6220-787 5m Lead set
as above but 25mm2cable fitted.
Description
Lead set consists of pair of flexible high current capacity
(600 A cont.) leads, together with a separate pair of lightweight potential leads.
Current leads are fitted with heavy duty sprung clamps (60
mm jaw capacity).
Potential leads fitted with smaller HD crocodile clips 22 mm
jaw capacity).
Will fit:
DLRO200 (6220-755 supplied as standard)
DLRO600 (6220-755 supplied as standard)
DLRO200-115 (6220-787 supplied as standard)
6220-756 10m Lead set
2 x 70mm2current leads with clamps and 2 x potential leads
with clips.
6220-757 15m Lead set
2 x 95mm2current leads with clamps and 2 x potential leads
with clips.
Description
Lead set consists of pair of flexible high current capacity
(600 A cont.) leads, together with a separate pair of lightweight potential leads.
Current leads are fitted with heavy duty sprung clamps (60
mm jaw capacity).
Potential leads fitted with smaller HD crocodile clips 22 mm
jaw capacity).
Will fit:
DLRO200 (6220-755 supplied as standard)
DLRO600 (6220-755 supplied as standard)
UK
Archcliffe Road Dover
CT17 9EN England
T +44 (0) 1304 502101
F +44 (0) 1304 207342
UNITED STATES
4271 Bronze Way
Dallas TX 75237-1019 USA
T 800 723 2861 (USA only)
T +1 214 333 3201
F +1 214 331 7399
OTHER TECHNICAL SALES OFFICES
Norristown USA, Toronto CANADA,
Mumbai INDIA, Trappes FRANCE,
Sydney AUSTRALIA and the
Kingdom of BAHRAIN.
Registered to ISO 9001:2000 Cert. no. Q 09290
ed to ISO 14001-1996 Cer
Register
DLRO_TL_DS_en_V01
www.megger.com
Megger is a registered trademark
t. no. EMS 61597
Loading...