Page 1
CFL535G
Advanced Dual Channel TDR
Comprehensive Dual Channel capability with
dual aspect display.
AUTO set up mode for instant use.
Ultra fast pulse for near end fault
identification.
Xpert guidance to potential fault.
IP54 rating offers real life working.
Designed for use on all metallic paired
cables.
CFL535G
Advanced Dual Channel TDR
DESCRIPTION
The Megger
resolution, compact Time Domain Reflectometer with a color
screen for locating faults on paired metallic cables.
The CFL535G has a minimum resolution of 0.3 ft /0.1 m and a
60 kft/20 km maximum range depending on the velocity factor
selected and the cable type.
Five output impedances are available (25, 50, 75, 100, 125
ohms) and an auto impedance matching feature. The velocity
factor can be set between 0.2 and 0.99 to meet any cable test
requirements.
FEATURES AND BENEFITS
The CFL535G has a large, high resolution, color, WVGA
display with easy set up features. Directional control buttons,
together with soft keys, provide intuitive and easy operation
for the user.
An AUTO selection option ensures that the most effective
parameters are selected depending on the range required,
aiding rapid diagnosis of the TDR trace. The ability to manually
override the auto function allows fine tuning to enable
identification of hard to determine faults.
Dual trace and dual cursor capabilities allow full flexibility,
giving the operator full control and instant indication of
distance between two points.
A trace comparison feature also allows close examination
between trace conditions. Extra high resolution together with
a white-light backlight, user definable tones and color give the
graphical display a vibrance, aiding the user in identifying key
events on the trace.
®
CFL535G is a state of the art, dual channel, high
Trace Storage
100 internal trace memories provide for the storage and
recall of test results. The traces can be recalled to the display
for analysis or compared with an active display to aid in fault
location.
Alternatively the stored results can be downloaded to a
computer, via the USB port, using the TraceXpert software and
USB lead provided.
Fault identification
Megger’s own built-in Xpert mode allows for speedy
identification of faults. One press of the Xpert key
automatically adjusts the range and gain, and positions the
cursor to the first major event on the cable. Press the Xpert
key again and the CFL535G will jump to the next detected
disturbance.
For those who wish to maintain manual control, manual
operation allows full override access to refine the response for
easy fault identification.
TraceXpert PC software
The CFL535G comes complete with the Megger TraceXpert
software which gives full control over downloading, reporting
and uploading of saved trace results. Designed around a
database and programmed for ease of use and simplicity,
TraceXpert offers the ideal application for all your data
processing requirements.
Page 2
CFL535G
Advanced Dual Channel TDR
MODELS
The CFL535G is available in two models.
CFL535G A fully featured high resolution TDR with
backlit color display and powered by Li-ion
rechargeable battery batteries. This model
comes complete with 2 pairs of
mini-clip Test Leads.
TDR2000/3P The same as the CFL535G but with dual
fused test leads replacing the mini-clip leads
ADDITIONAL FEATURES
Backlit graphics color LCD (800x480)
Adjustable display contrast
Resolution to 0.1 m
Trace Xpert guide to potential fault location
100 trace on board memory
USB connection to PC allowing upload and download of
traces
“TraceXpert” PC software analysis tool
For use on Telecom TNV-3 circuit, or 150V CAT IV power
circuits
Power blocking filter built-in
Environmental protection to IP54
Selectable output impedance (25, 50, 75,100 and 125 Ω)
2ns pulse for near end fault location
AUTO option selecting gain and pulse for each range
AUTO option matches output impedance to cable
Display distance in metres or feet
Li-ion rechargeable battery (12 hours typical life)
SPECIFICATION
Except where otherwise stated, this specification applies at an ambient
temperature of 68 ºF (20 ºC).
General
Ranges: Up to 20000m with a minimum resolution of 0.1m
Accuracy: ±1% of range ± 1 pixel at 0.67VF
[Note- The measurement accuracy is for the indicated
cursor position only and is conditional on the velocity
factor being correct.]
Resolution: 1% of range
Input Protection: This instrument complies with IEC61010-1 for
connection to live systems up to 150 V CAT IV.
Fused leads must be used if the voltage between the
terminals exceeds 300 V.
Output pulse: Up to 20 volts peak to peak into open circuit. Pulse
widths determined by range and cable
Gain: Set for each range with user selectable steps (in
Manual operating mode)
Velocity Factor: Variable from 0.2 to 0.99 in steps of 0.01
TX Null: Automatic
Power Down: User programmable auto power off timer 1, 5, 10
mins or off
Batteries: Li-ion rechargeable battery with 12 hours typical life
Safety: This instrument complies with IEC61010-1 for
connection to live systems up to 150 V CAT IV or
300 V CAT III. Fused leads must be used if the voltage
between the terminals exceeds 300 V. Compliant with
EN60950-1, EN61010-3, UN38.3 and EN62133
EMC: Complies with Electromagnetic Compatibility
Specifications (Light industrial) BS EN 61326-1, with a
minimum performance of ‘B’ for all immunity tests
Mechanical: The instrument is designed for use indoors or
outdoors and is rated to IP54.
Case Dimensions: 11.4 in. x 7.5 in. x 2.2 in
(290 mm x 190 mm x 55 mm)
Weight: 3.8 lbs (1.7kg)
Case material: ABS
Connectors: Four 4mm-safety terminals and two F connectors.
Other standard push on adapters will fit the CFL535G
Test Leads: Bed-of-Nails lead set (CFL535G) or .5 meter fused
leads (TDR2000/3P)
Display: 800 x 480 pixel WVGA color graphics LCD, viewable
in external environments. User selectable color
schemes
Environmental
Operational Temperature: 5 ºF to 122 ºF (-15 ºC to 50 ºC)
Charging Temperature: 32 ºF to 104 ºF (0 ºC to 40 ºC)
Storage Temperature: -4 ºF to 158 ºF (-20 ºC to 70 ºC)
Page 3
CFL535G
Advanced Dual Channel TDR
ORDERING INFORMATION
Item (Qty) Cat. No.
CFL535G Time Domain Reflectometer 1003-035
TDR2000/3P Time Domain Reflectometer
(Includes dual fused, fitted test leads) 1003-341
Included Accessories
Download kit 1003-353
Carry case 1003-217
Bed of nails test leads 6231-655
Dual fused test leads (TDR2000/3P) 1002-136
User guide CD 2003-074
AC-DC charger 1003-352
UK
Archcliffe Road Dover
CT17 9EN England
T +44 (0) 1304 502101
F +44 (0) 1304 207342
UKsales@megger.com
UNITED STATES
2621 Van Buren Avenue
Norristown, PA 19403 USA
T 1 866-254-0962 (USA only)
T +1 610-676-8500
F +1 610-676-8625
VFCustomerSupport@megger.com
(case sensitive email address)
Item (Qty) Cat. No.
Optional accessories
Terminal adaptor kit 1003-218
Single pair mini-clamp test leads 6231-652
Single pair fused test leads 1002-015
AC power lead 25970-002
Replacement battery 1002-552
OTHER TECHNICAL SALES OFFICES
Dallas USA, College Station USA,
Sydney AUSTRALIA, Danderyd SWEDEN,
Ontario CANADA, Trappes FRANCE,
Oberursel GERMANY, Aargau SWITZERLAND,
Dubai UEA, Mumbai INDIA, Durban SOUTH
AFRICA, Chonburi THAILAND, Malaga SPAIN
CERTIFICATION ISO
Registered to ISO 9001:2008 Cert. no. Q 09250
Registered to ISO 14001-2004 Cert. no. EMS 61597
CFL535G_DS_USen_V05a
www.megger.com
Megger is a registered trademark
Information contained herein subject to
change without notice
Loading...