P.O. BOX 9007, VALLEY FORGE, PA 19485-1007 ! 1-800-723-2861
The industry leader since 1895, AVO Biddle Instruments offers a
comprehensive line of electrical test and measurement products, from
portable instruments for use in the field to fully-integrated systems for
high voltage systems testing. AVO Biddle Instruments fulfills a range of
requirements found in electric utility, large industrial, electrical
apparatus manufacturing, military and governmental applications
worldwide.
Portable Field Test Equipment
AVO Biddle’s extensive product line includes its well known portable field
test equipment, including the MEGGER
testers, which indicate the deterioration of electrical insulation; Ground
Resistance Testers for installing and maintaining grounding systems;
and equipment for locating faults in both power and communications
cable.
®
family of Insulation Resistance
Precision Test & Measurement Equipment
AVO Biddle operates a calibration lab traceable to the NIST to insure the
quality of its precision products, which includes the DRLO
low resistance ohmmeters.
®
line of digital
High Voltage Systems Test Equipment
AVO Biddle is a leading supplier of equipment and systems for High
Voltage Systems testing applications, from rigorous QC testing of
manufactured power cable to demanding R&D requirements in the
Aerospace industry. This range of products includes fully-integrated
systems for detecting minute levels of partial discharge to HV power
supplies and DC dielectric, transformer turn ratio and
capacitance/dissipation factor test sets for use in the field testing of large
power apparatus.
No matter whether it’s a hand-held MEGGER
750kV Partial Discharge Detection Systems, AVO Biddle Instruments
backs it up with a full range of support services:
®
Insulation Tester or a
Application Assistance
Our Application Engineers can demonstrate how AVO International ca n fulfill
your testing requirements.
Customer Service
Contact one of AVO’s Customer Service Representatives for quick
answers to your questions regarding where to buy, order entry, delivery
or warranty and repair information. They can also assist you in ordering
replacement parts, accessories, operating/service manuals and
product/application literature.
Worldwide Network of Authorized Stocking Distributors
Many of our products are readily available through an Authorized
Stocking Distributor near you.
And More…
AVO Biddle also supports you with expert calibration services traceable
to the NIST, full one-year warranty, convenient leasing and much more.
Because when you buy AVO Biddle, you’re getting more than a quality
product.
To speak to an AVO International Customer Service Representative or for
information about any of Biddle’s products and services, contact us at:
AVO International
P.O. Box 9007
Valley Forge, PA 19485-1007
1-800-723-2861 ext. 8578
610-676-8578
Shipping Address:
Valley Forge Corporate Center
2621 Van Buren Avenue
Norristown, PA 19403
WARRANTY AND REPAIRS ............................................................................. H1
FIGURE 1: ULTRASONIC CORONA AND LEAK DETECTOR CATALOG NO. 569001
a1
Contact Probe, Catalog No. 569001-8
Ultrasonic
Tone Generator,
Catalog No.
569001-7
FIGURE 2: ACCESSORY ITEMS.
a2
Section A
INTRODUCTION
Electrical discharges from a high voltage terminal to the air (corona) or along an
insulated surface generate acoustical signals. Over a wide range of
circumstances a significant portion of the generated signal energy will have
frequencies above the range of the human ear. This is the ultrasonic frequency
range and may be used to detect the presence of corona or surface discharge
with the advantage that audible background noise is excluded.
Corona and surface discharge are localized to small areas relative to the total
size of the equipment. The Biddle Cat. No. 569001 Ultrasonic Corona and Leak
Detector is equipped with a highly directional horn to permit the user to localize
the source of the electrical discharge while remaining at a safe distance from the
electrical terminals. This directional property also increases the sensitivity of the
detector and tends to exclude any ultrasonic signals not related to the test in
progress. The Cat. No. 569001 is effective in locating corona on insulators,
bushings, and potheads in energized circuits such as utility poles, non-enclosed
switchgear, bus bars or transformers and aids in isolating multiple sources
located on the equipment under test. It is also useful in checking insulation test
setups for either ac or dc to determine if corona is present on the test terminals.
Pinpointing such corona and demonstrating its reduction will usually result in
considerable saving of testing time and assist in obtaining reliable results.
The Detector is designed for easy use. It is supplied in a compact light-weight
carrying case; it operates on a single transistor battery and is quickly ready for
service in the field or on the test floor.
In addition to detecting corona sources, the Detector is an excellent tool for
locating gas leaks and other sources of ultrasound.
A1
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.