Megavision MV192SN Users Manual
REV. 00
Table of Contents
Please read the cautions carefully before using
this product 2
Product features 3
Installation of the product 4
Names and operation of control buttons 6
Cable Connection 7
Selection and operation of the OSD menu 8
MENU Function 9
Explanation of message for utilization 12
Timing guide 13
ENG
Product specifications 14
Troubleshooting 15
1
ENG
Please read the cautions carefully before using this product
Do not scratch the screen of the
LCD monitor with sharp materials
such as nails and pens.
Take care not to use damaged
cords and keep this product out
of reach of children and persons
who are not involved in using
the product.
Choose a fresh and dry area
and protect the monitor from
extreme conditions of temperature and humidity, dust and
smoke. Adequate temperature
= 0-40°C. Adequate humidity =
30-80 RH.
The interior part of the monitor is
composed of electric elements. If
the monitor is broken, do not try
to disassemble it, because it is
necessary to contact appropriate
technical services in order to have
the product repaired.
Disconnect the power cable when
the monitor is not used during a
long period of time while you are
away from home.
The LCD monitor screen can
be damaged in the case that
you clean the surface by using
acetone, ethyl alcohol or acid
detergent.
Take care of the LCD monitor
so that it is not damaged by the
external impact.
Do not use this product near the
windows receiving direct sunlight
or direct natural light.
Do not install the monitor in a
sloping place that is not safe due
to the fact that the product can fall
down and be broken, thus doing
harm to other persons.
Check the power voltage before
connecting to the AC power
cable.
Please comply with the rules to prevent injury and property damage.
2
Take care so that the monitor
is not in contact with magnetic
materials, metals and inflammable
substances.
ENG
3
Product features
Introduction
Thank you for buying our TFT LCD monitor.
Our monitor is a high-resolution monitor that has features of electromagnetic
wave blocking, reduction in electricity consumption, and efficient use of space.
In view of the fact that this user's manual is prepared for helping you to
adequately use the product, it is recommendable to read the user's manual
before using the product.
Product features
1) This product has a 19-inch flat surface (Color Active Matrix TFT LCD) with a
pixel size of 0.2835mm (H) X 0.2835mm (V) for displaying an ultra-precision,
high-resolution image.
2) This product uses 19"(Thin Film Transistor) LCD panel and supports a
maximum of 1440 x 900.
3) This product is a monitor whose deflection frequency is automatically
transformed up to 30 - 80 kHz horizontally and up to 56 - 75 Hz vertically.
4) This product is compatible with IBM PC and Apple Macintosh (a different
adapter is necessary for Apple Macintosh).
5) This product has a power-saving function less than 42 W in ON mode, less
than 2 W in stand-by mode, pause mode and less than 1 Win OFF mode in
comparison with other monitors.
6) This product supports DDC and allows you to use 'Plug and Play'.
Note
Registered as a device whose electromagnetic wave-blocking capacity
is adequate(B Class). This product is registered as a device whose
electromagnetic wave-blocking capacity is adequate and can be used in
all places (including homes).
In the case of some system requirements, it may not be compatible
with Plug and Play.
ENG
Installation of the product
Checking the product
Please check if the product contains the following items. If there are
items missing, please contact the technical services.
1. TFT LCD monitor
2. User's manual (including product warranty).
3. AC to DC adapter.
4. Power cable (the power cable can be different according to use
environment).
5. Signal Cable ( Monitor Connection Cable )
6. Monitor Base
7. Audio cable
How to connect monitor stand base
How to install the monitor stand
1. Lay the monitor on a flat surface.
2. Attach the monitor to the connecting parts as
shown in the picture.
3. Turn it to the locking point.
To detach it, do it inversely.
Installation
1. Turn off the power before connecting to an external device.
2. Power connection, Connect the adapter to the DC jack connected to the
signal cable of the monitor and connect the power cable.
3. Signal connection, This signal input terminal is a D-SUB connector.
Connect the signal cable to the signal input of the computer.
4. Turn on the power of the monitor.
5. Turn on the power of the system that you want to use.
6. Continue with the operation when the screen appears. You can adjust the
desired status of the screen using control buttons at the bottom of the
monitor.
7. Up/Down Monitor Angle should not be over 15/20 degree.
8. To finish operation, turn off the system power and then turn off the power of
the monitor.
4
ENG
5
Installation of the product
Caution
Adjusting LCD panel angle
- Do not hold or press down on the monitor’s
screen while adjusting angle since LCD
panel maybe damaged or break if severe.
- Do not lean backward excessively so that
the monitor does not fall backwards.
- Be careful of potential damage to the stand
while adjusting angle.
Loading...