Megatron MT76722, MT76720, F28100RC-d User guide
Integrated LED Downlight - Siena
F28100RC-d
Instruction Manual
MEGATRON
TECHNICAL SPECIFICATION
MM Code MT76720 MT76722
Model Number F28100RC-d WH26 F28100RC-d NI53
Wattage 8W 8W
Voltage 220-240V~ 220-240V~
Frequency 50/60Hz 50/60Hz
Dimmable Yes Yes
IP Rating
IP20
IP23
IP20
IP23
IP20
IP23
IP20
IP23
CAUTIONS
•
Read the entire manual carefully before installation and operation.
•
Installation or replacement should be performed only by licensed and qualified
electricians.
•
DO NOT disassemble the luminaire. Doing so may result in lamp damage or
malfunction.
•
Switch off the power source before installation, replacement and cleaning.
•
Wearing gloves during installation is recommended to ensure the luminaire is kept
in the best condition.
Before replacement of the luminaire, turn it off and allow it to cool down. Heat-
•
ATTENTION
•
Instant start is allowed.
Designed for indoor application and recessed ceiling installation.
•
Installation
Cut-Out Ø:
Max.
25mm
Model No. Cut-Out (mm)
F28100RC-d 68
• Suggested Connection Box
Model Number
Connection
Type
resistant gloves are mandatory when handling the luminaire.
•
The F28100RC-d is capable of linear dimming from 100% to 10% when working with
LA2501
Parallel type
(Short version)
LA2504 LA5111
Single screw type
(Long version)
Single screw
type
2-way 2-way 3-way
LA5113
Single parallel
push-in type
3-way
most conventional dimmers for incandescent lamps or halogens. Please visit
www.zenialighting.com/download.html for the list of compatible dimmers.
•
The minimum safety distance from the illuminated object is 0.1m.
•
The manufacturer accepts no liability for any damage resulting from the misuse
---
0.1m
of the luminaire or from when it is used with inappropriate equipment.
•
Consult your dealer if you have any enquiries.
• The operating temperature of the luminaire is -30°C to +40°C.
Safety Distance:
Model No. W (mm) H
F28100RC-d
(mm)
60
80
W W
H
TYPE OF CONNECTION
Pow er Cord Preparation (f or 2-way single screw ty pe):
Power Cord Preparation:
6.5mm
5.5mm
Pow er Cord Preparation (f or 2-way parallel type):
Power Cord Preparation:
6.5mm
5.5mm
2
0.5-1.5mm
For solid conductors
2
0.5-1.5mm
For tinned wire ends
max. 1.5mm
For wire ends with ferrule
1mm
Pow er Cord Preparation (f or 3-way single parallel push-in type):
Power Cord Preparation:
11-12mm
18-23mm
2
0.75-2.5mm
For solid conductors
2
0.75-2.5mm
For tinned wire ends
max. 1.8mm
For wire ends with ferrule
1mm
Single Type Connection
Input voltage
220-240V~
NL
Press downwards to secure
connection wire
Pow er Cord Preparation (f or 3-way single screw type):
Single Type Connection
Input voltage
Power Cord Preparation:
Single Type Connection
Input voltage
220-240V~
6mm
18-26mm
N
L
Press downwards to secure
connection wire
Parallel Type Connection
Input voltage
220-240V~
NL
Single Type Connection
Input voltage
220-240V~
Parallel Type Connection
Input voltage
220-240V~
220-240V~
Must not exceed 15PCES.
Must not exceed 15PCES.
Correct disposal of This Product
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental safe
recycling.
IDV GmbH
Birkenweiherstr. 2
D-63505 Langenselbold
Germany
www.megatron-licht.eu
MEGATRON
80 10G 00 44 A
GB
Loading...