Megatron MT76700, MT76702, MT76704, MT76706, MT76707 User guide
...
Integrated LED Downlight - Siena
F26000RC/F26100RC/F26200RC/F26300RC
/F26400RC-d/F27100RC
Instruction Manual
TECHNICAL SPECIFICATION
Item Number MT7 6700 MT76702 MT76704 MT 76706/7/8 MT76709/ 10 MT 76711
Model Number F26000RC F26100RC F26200RC F26300RC F26400RC-d F27100R C
Wattage 5W 7.5W 12.5W 20.5W 13W 35.5W
Voltage 220-240V~ 220-240V~ 220-240V~ 220-240V~ 220-2 40V~ 220-240V~
Frequency 50/60Hz 50/60Hz 50 /60Hz 50/6 0Hz 50/60Hz 50/60Hz
Dimmable No No No No Yes No
IP Rating
IP20
IP20
IP23
CAUTIONS
IP23
• Read the entire manual carefully before installation and operation.
• Installation or replacement should be performed only by licensed and qualified
electricians.
• DO NOT disassemble the luminaire. Doing so may result in lamp damage or
malfunction.
• Switch off the power source before installation, replacement and cleaning.
• Wearing gloves during installation is recommended to ensure the luminaire is kept
in the best condition.
IP20
IP20
IP23
IP23
IP20
IP20
IP23
IP23
IP20
IP20
IP23
IP23
resistant gloves are mandatory when handling the luminaire.
IP20
IP20
IP23
IP23
• The F26400RC-d is capable of linear dimming from 100% to 10% when working with
most conventional dimmers for incandescent lamps or halogens. Please visit
www.zenialighting.com/download.html for the list of compatible dimmers.
• The minimum safety distance from the illuminated object is 0.1m.
• The manufacturer accepts no liability for any damage resulting from the misuse
of the luminaire or from when it is used with inappropriate equipment.
• Consult your dealer if you have any enquiries.
• Before replacement of the luminaire, turn it off and allow it to cool down. Heat-
ATTENTION
• Instant start is allowed.
• Designed for indoor application.
• The operating temperature of the luminaire is -30°C to +40°C.
Installation
MEGATRON
IP20
IP20
IP23
IP23
0.1
m
Max.
25mm
Model No. Cut-Out (mm)
F26000RC 85
F26100RC 105
F26200RC 125
F26300RC 150
F26400RC-d 85
F27100RC 200
Pow er Cord Preparation (f or screw-i n type):
2
1.0-2.5mm
For solid conductors
2
0.75-2.5mm
6mm
For tinned wire ends
Ø6.2 -7.4m m
14-20mm
For wire ends with ferrule
1mm
Cut-Out Ø:
Input Voltage
220-240V~
Safety Distance:
Model No. W (mm) H
(mm)
F26000RC 80 100
F26100RC 80 100
F26200RC 100 140
F26300RC 100 140
F26400RC-d 80 100
F27100RC 100 140
Pow er Cord Preparation (f or snap-in type):
2
0.75-2.5mm
For solid conductors
2
0.75-2.5mm
11-12mm
For tinned wire ends
Ø6.2 -7.4m m
14-20mm
For wire ends with ferrule
1mm
H
W W
Input Voltage
220-240V~
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental safe
recycling.
IDV GmbH
Birkenweiherstr. 2
D-63505 Langenselbold
Germany
www.megatron-licht.eu
MEGATRON
80 10 GR C46 B
GB
Loading...