Megatron MT02722, MT02732, MT02764, MORPHEUS PAR38 User guide

INSTRUCTION MANUAL

MORPHEUS PAR38

TECHNICAL SPECIFICATION

Model Number MT02722/MT02732/MT02764
Lamp Holder E27
Wattage Max. 20W PAR38
Voltage 220-240V~
Frequency 50/60Hz

• Read the entire manual carefully before installation and
operation.

• Installation or replacement should be performed only by
licensed and qualifi ed electricians.

• Switch off the power source before installation, replacement

and cleaning.

• Wearing gloves during installation is suggested for keeping
the luminaire in the best condition.

• Before replacement of luminaire or lamp, turn off and allow
them to cool down. Heat-resistant gloves are mandatory
when handling the luminaire or lamp.

• In case the external fl exible power cord is damaged, the
replacement should be handled by a licensed and qualifi ed

electrician for safety purpose.

• The minimum safety distance from the illuminated object is

0.1m.

• MEGAMAN
this luminaire. Using incandescent lamp, halogen or other

kinds of light source will result in risk of fi re or electric shock.

• The manufacturer accepts no liability for any damage

resulting from the misuse of the luminaire or when it is used
with inappropriate equipment.

• Consult your dealer for any enquiries about this product.

®

LED PAR38 E27 up to max. 20W can be used with

ATTENTION

• Instant restart is allowed.

• Designed for indoor application.

• Recommended working temperature of luminaire is -30°C to + 40°C

INSTALLATION

Please read the above installation instructions carefully before proceeding with installation

Step 1. Fasten the lamp into the lamp holder. The lamp will be locked and secured through
the lamp socket.

Ridge

ON/OFF

0/1/2/3

Correct disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent pos­sible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustain­able reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environmental safe recycling.

IDV GmbH
Birkenweiherstraße 2
D-63505 Langenselbold
Germany
www.megatron-licht.eu

Step 2. Install the adaptor‘s
switch at the „OFF“ position
and push the adaptor into the
track.

*Pay attention to the position of
the track‘s ridge. The ridge on
the adaptor should match the
track.

Step 3. Turn the mechanical fi xing
knob to the „ON“ position to fi x

the adaptor. Select the desired
circuit (1/2/3) with the circuit
selector knob.