Page 1
NS63
Active Noise Canceling
Headphones with Headset Functionality
Page 2
Congratulations, and thank you for choosing the
MEElectronics NoiseSHIELD NS63
Active Noise Canceling Headphones
Please read this manual in its entirety and
visit meelec.com/manual for additional
information and troubleshooting
If you have any questions or issues
after reading the manual, please contact
MEElectronics customer service at
customerservice@meelec.com
or (626) 965-1008
Page 3
Package Contents
Warning
NoiseSHIELD NC63 Features
Putting Batteries in the NC63
Listening to Music/Audio
Noise Canceling Only Use
When Not in Use
Headset Use
Headset Use: Controlling Volume
Headset Use: Taking Phone Calls
Microphone and Remote Use
Warranty
Troubleshooting
Specifications
1
2
3
4
5
6
7
8
10
11
12
13
15
Page 4
NS63
Active Noise
Canceling
MUTE
Headphones
Protective
Case
Headset
Cable
User
Manual
Audio
Cable
Note: An online version of this manual is available on meelec.com
Page 5
Warning
Noise canceling headphones attenuate external low-pitched sounds.
Be aware that when the active noise canceling feature is on auditory
queues will sound different.
Do not use headphones at high volumes for extended periods of time
as doing so will result in permanent hearing damage. It is advised you
keep volume levels moderate to low at all times for your safety. Do
not use while driving a car, cycling, operating machinery, or
performing other activities that require hearing surrounding sounds.
Please visit www.osha.gov for more info.
It is advised to turn the volume on your music player all the way
down before connecting your headphones. After the headphones are
connected, gradually increase the volume until a comfortable listening
level is achieved.
Do not store the headphones in direct sunlight,
•
near heating devices or in hot, humid or dusty places.
Do not subject the headphones to strong impact.
•
Do not allow the headphones to become wet.
•
Page 6
NoiseSHIELD NS63 Features
The NoiseSHIELD NS63 is a feature-rich high quality active noise
canceling (ANC) headphone.
No batteries are necessary for the NoiseSHIELD NS63 to
•
work, however two AAA batteries are required for the ANC
function to work.
Equipped with a jack on the left ear cup for a detachable
•
cable, the NoiseSHIELD NS63 works with any cable that has
a standard 3.5mm plug. Both a standard audio cable and
headset cable are included.
The Mute button on the left ear cup will mute the audio signal.
•
When on, ANC will remain active but audio will be muted while
the mute button is pressed.
The ANC feature can be activated for noise reduction without
•
the audio cable plugged in for ANC-only functionality.
The NoiseSHIELD NS63 has a battery life of up to 32 hours
•
from a pair of AAA batteries for ANC functionality.
NoiseSHIELD technology blocks out unwanted external noise
•
without changing the sound of your music!
Page 7
Putting Batteries in the NS63
THE NOISE CANCELING FUNCTION REQUIRES 2 AAA BATTERIES.
BATTERIES NOT INCLUDED.
1.
Remove
the battery
compartment
lid on the
+
OPEN
+
right ear cup
by sliding it in
the direction
of the arrow
right ear cup
+
BATTERY
BATTERY
+
2.
Insert AAA
batteries in
the correct
orientation
as shown.
OPEN
+
BATTERY
BATTERY
+
OPEN
www.meelec.com 04
3.
Replace the
battery
compartment
lid and slide it
the opposite
direction of the
arrow until it
clicks in place
Page 8
Listening to Music/Audio
power
switch
headphone
jack
1.
Connect either the audio cable or headset cable to the jack on the
left ear cup, making certain the plug is firmly seated.
If using the headset cable, orient it so that the microphone is closest
to the headphones.
Connect the other end of the cable to the headphone jack of your
2.
audio device.
To activate the noise canceling function, move the power switch on
3.
the left ear cup to the “ON” position; power indicator should light up
green. (If you do not wish to use active noise canceling , move
power switch to the “OFF” position.)
MUTE
left ear cup audio device
power
indicator
audio
cable
05 brings musical enjoyment to everyone
headset
cable
Page 9
Noise Canceling Only Use
mute button
A.
ON position
B.
power switch
C.
headphone jack
D.
OFF position
E.
power indicator
F.
A
B
C
D
To activate noise canceling function, move the power switch on
1.
your headphones to the “ON” position; power indicator should
light up green.
There is no need to connect a cable to use the noise canceling
function only; simply turn the headphones on and wear them.
MUTE
left ear cup
E
F
www.meelec.com 06
Page 10
When Not In Use
When not using your headphones, move the power switch to the
•
“OFF” position.
Remove battery if you will not be using the noise-cancelling
•
functionality of the headphones for an extended period of time
(greater than one week).
Store the headphones in the included protective carrying case.
•
To clean the headphones, wipe with a clean, soft cloth. Do not use
•
harsh chemical cleaners on the headphones.
MUTE
07 brings musical enjoyment to everyone
Page 11
Headset Use
The included headset cable features an inline microphone, remote,
and universal volume control. The headset cable is compatible with
most smartphones and tablets.
For full compatibility and functionality, including controlling media playback,
universal volume control
remote button
Maximum volume is located when the switch
Microphone The opening for the microphone is located as shown.
Universal
For best results ensure microphone/remote unit is close
to your mouth with the opening facing you
Remote
Please see page for information on using the remote
button
button
The + symbol indicates the maximum volume position.
volume
If you don’t hear sound, please check the volume control
control
slider.
meelec.com/phone.
please visit
+
maximum volume setting
microphone
is closest to the + on the remote.
Page 12
Headset Use (Cont.)
Use the headset cable with smartphones.
power
switch
headphone
jack
Plug the 3-pin plug into
the NoiseSHIELD NS63’s
MUTE
left ear cup audio device
headphone jack
power
indicator
headset
cable
Plug the 4-pin plug
into compatible
phone or tablet
09 brings musical enjoyment to everyone
Page 13
Headset Use: Volume Control
Important:
Volume is controlled on the inline mic/remote unit.
If you don’t hear any sound, or the volume is low, adjust the volume
slider toward the + symbol on the remote.
Headset Use: Taking Phone Calls
Functionality for iPhone® and most Android™ phones:
Phone Mode
Incoming phone call
Phone call in progress
Note: If you experience issues please make sure no other applications are interfering
with remote functionality
MUTE
Button Press
Single press
Single press
Action
Answer phone call
End call
www.meelec.com 10
Page 14
Microphone and Remote Use:
Controlling Media
Note: iPhone and Android devices support multi-tasking, allowing one
program to have priority over others, which can affect remote button
functionality. If your remote button is not working, try bringing the program
you want the remote to work with into focus (active window).
Apple device functionality (iPhone, iPad
Phone Mode
No incoming
call/active call
Button Press
Single press
Quick double
press
Quick triple press
Play/pause music
Next track
Start track over or previous track
Activate voice control (iPod Touch 3G, 4G,
iPhone 3GS, 4); Activate Siri (iPod Touch
5G and newer, iPhone 4S and newer)
Android device functionality:
Phone Mode
No incoming
call/active call
Note: Different applications will behave differently, and this is not a
guarantee of functionality
11 brings musical enjoyment to everyone
Button Press
Single press
Quick double press
Quick triple press
®
, iPod touch®):
Action
Action
Play/Pause
Next track
Varies with the application
Page 15
Warranty
The NoiseSHIELD NS63 is covered by a 1 year manufacturer warranty
against manufacturing defects. Cleaning your NS63 when necessary will
extend the life of your headphone.
For issues with your product, contact customerservice@meelec.com.
Contact warranty@meelec.com for warranty claims from:
Within the US or Canada from an authorized reseller
•
(see www.meelec.com/wheretobuy)
From www.meelec.com
•
From the MEElectronics store at Amazon.co.uk
•
For international retailers or distributors and unauthorized resellers
(see authorized resellers at www.meelec.com/wheretobuy)
contact your retailer for warranty service.
Page 16
Troubleshooting
Problem
Ambient
noise is not
reduced
All outside
sounds
are not
eliminated
No sound
Solution
Make sure the noise canceling function switch is in the
ON position and the green light is lit; if the light is not lit,
change the batteries
Adjust the headphones to completely cover your ears
Turn the power switch off and then on again to ensure
synchronization of the noise canceling signal
The NS63 reduces external noise by up to -18dB and no
ANC headset on the market can completely eliminate
outside noises; Constant, low-frequency noises are
reduced the most.
Check that the audio or headset cable is plugged into the
NS63 completely and the other end is plugged
completely into an audio source, audio is playing, and the
volume is loud enough to hear
If you are using the headset cable with a computer,
laptop, media player, or airplane headphone jack, the
4-pin headset plug may not be compatible; use the
stereo audio cable instead
If you are using the headset cable, make sure the volume
control is not at the minimum position; adjust both the
volume on the device and headset cable to a comfortable
level
Make sure the mute button is not being pressed
Page 17
Troubleshooting Continued
Problem
During
phone calls
the person
on the other
end can’t
hear me
The remote
button
doesn’t work
Solution
Check to make sure you are using the headset cable,
make sure the microphone/remote unit is closest to the
headphones the microphone is close to your mouth
Check the compatibility of your phone at
meelec.com/phone
Try unplugging the headset cable and plugging it back in
to your phone
If you are using a computer, you may need an adapter
(Skype adapter on meelec.com) to separate the
microphone and audio signals
Check to make sure you are using the headset cable and
make sure the microphone/remote unit is closest to the
headphones
Check the compatibility of your device at
meelec.com/phone; if the sound improves when you
press the remote button, the device is not compatible
Multitasking devices can prevent button presses from
being recognized; make sure the application you want to
work with the remote is the active window
Page 18
Specifications
Driver:
Frequency response:
Impedance:
Sensitivity:
Active noice reduction:
Power requirements
Battery life
MEElectronics and its logo are registered trademarks of S2E, Inc.
All rights reserved.
®
iPod
, iPhone®, and iPad® are registered trademarks of Apple Inc.
™
Android
is a trademark of Google Inc.
15
40 mm cobalt magnet dynamic driver
20 Hz to 20 KHz
32 ohms + 15% @ 1K 1mW
108 dB
12 dB at 300 Hz
2 x 1.5V AAA battery
Up to 32 hours with ANC active
Loading...