Meelectronics Matrix 2 AF62 User Manual

USER MANUAL

part of the series

STEREO WIRELESS
BLUETOOTH HEADPHONES

model: AF62

EN

TABLE OF CONTENTS

Product Overview
Charging
Powering On and Off
Pairing with Bluetooth® Devices

iPhone®, iPad®, and iPod touch®
Android™ Phones and Tablets
Computers and Laptops

Pairing with Bluetooth devices using NFC
Connecting to Paired Devices
Using the Air-Fi Matrix2 Headphones

Adjusting Volume
Controlling Phone Calls
Controlling Media Playback
Additional Functionality

Multipoint
Using as a Wired Headphone
Safety and Care
Specifications
Troubleshooting
Warranty

MEElectronics and its logo are registered trademarks of S2E, Inc. All rights reserved.

iPhone®, iPad®, iPod touch® is a registered trademark of Apple Inc.
Android™ is a registered trademark of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by MEElectronics is under license. Other trademarks and trade names
are those of their respective owners.

1
2
2
3

3
3
3

4
4
5

5
5
6
6

7
8
8
8
8
8

PRODUCT OVERVIEW

EN

CHARGING

*** You must completely charge the headset

before the first use ***

Connect the USB charging cable to any powered USB port and to the USB
jack on the right ear cup. The red LED indicator will light solid while charging.
Charge time is typically 3-6 hours for the first charge and 2-3 hours for
subsequent charges. When the battery is fully charged the bright red
LED indicator will turn off.

Note: Bluetooth will function when the unit is charging, but leaving the Air-Fi
Matrix2 on can increase charge time. The headphones can also be turned
off and used with the included audio cable while charging. This will not affect
charge time.

When the battery is low, the red LED will turn on. The Air-Fi Matrix2 will also
provide a low battery voice notification every minute.

POWERING ON AND OFF

To power on, press and hold the Power button for approximately 3
seconds. The Air-Fi Matrix2 will say “power on” and the blue indicator light
will flash every second to show the power is on.

To power off, press and hold the Power button for approximately 5
seconds.The Air-Fi Matrix2 will say “power off.”

a)

b)

PAIRING WITH BLUETOOTH® DEVICES

*** It is only necessary to pair your Matrix once

with each device ***

Open the Bluetooth menu* on the device you wish to pair. Some devices
require you to select “search for devices” or “add new devices” in order to
create a Bluetooth pairing.

Make sure the Air-Fi Matrix2 is off and within 1 meter of your device. Initiate
pairing mode by pressing the Power button for 6 seconds, until you hear
“ready to pair, turn on Bluetooth, the pin code is 0000”. The red and blue
LEDs will flash in an alternating pattern while the Air-Fi Matrix2 is in pairing
mode. (Note: The Air-Fi Matrix2 will enter standby mode if not paired within
5 minutes.)

Wait until you see “Air-Fi Matrix2” appear on your device

Select “Air-Fi Matrix2” on your device and allow to pair. If your device asks
for a pin, enter “0000”. Once pairing is complete and a connection is estab-

a)

b)

c)

d)

If pairing fails, please repeat steps a) through d) above

*Locating the Bluetooth menu:

iPhone, iPad, and iPod touch

On your device, go to

Settings

Select

Bluetooth

(Bluetooth is under the

General

menu in iOS 5.1.1 and
older); if Bluetooth is not on, turn it on. The iPhone/iPad/iPod will
automatically search for new devices

a)

b)

Android Phones and Tablets

On your device, go to

Settings

menu

Select

Wireless & Networks

Bluetooth

and if Bluetooth is not on, turn it
on. Select “Search for Devices” if your phone or tablet does not
automatically search for new devices

a)

b)

Computers and Laptops

Visit www.meelec.com/bluetooth for pairing, connecting, and audio device
setup for computers.

If pairing fails after several tries, please refer to your device’s user manual for
further information.

CONNECTING TO PAIRED DEVICES

*** The Air-Fi Matrix2 must have been previously paired

with your device before you can connect ***

When the Air-Fi Matrix2 is turned on and not in pairing mode, it should con­nect to the last connected device automatically. If the last connected device
discoverable, the Air-Fi Matrix2 will connect to other paired devices in the
order of last connection.

If the Air-Fi Matrix2 does not connect and remains in standby mode, a short
press of the Play/Pause button will connect to the last connected device with
Bluetooth on and within range.

Note: On some PC and Mac computers you will need to manually enable
Bluetooth audio every time you connect

PAIRING WITH BLUETOOTH DEVICES USING NFC

Note: When the volume reaches the minimum or maximum level there will
be two short tones.

Put the Air-Fi Matrix2 in pairing mode

Place the NFC-compatible device against the left ear cup of the Air-Fi
Matrix2 until pairing is complete.

A dialog box should automatically appear; if the dialog box does not
appear, re-position the device until it does

Follow the instructions on the screen to pair the device with the Air-Fi

a)

b)

c)

d)

Note: In standby mode and while playing media with most devices, volume
adjustments will only change the volume of the Air-Fi Matrix2. Adjust device
volume as needed to further increase or decrease the volume. During a phone
call the Air-Fi Matrix2 will control device volume. Some newer devices use AVRCP

1.3 Bluetooth Profile, which will allow the Air-Fi Matrix2 to change the device

Function

Increase
volume

Decrease
volume

Operation

Single press or press and hold the
Volume Up button

Single press or press and hold the
Volume Down button

Notes

When the volume reaches the
minimum or maximum level the
Matrix will produce a short tone.

USING THE AIR-FI MATRIX2 HEADPHONES

Adjusting Volume

Controlling Phone Calls

1

If you answer a call from your phone instead of the headset, most phones will activate

the phone handset, not the Air-Fi Matrix2.

Status

Incoming
call

Call in progress

Call in progress,
phone handset active

1

Call in progress,
second incoming call

One call active,
one on hold

Function

Answer a call

Reject a call

End a call

End a call

Answer new call and
place the current call
on hold

Reject incoming call

Switch active calls

End current call and
switch to call on

hold

Operation

Single press the Power button

Press and hold the Power button
for 2 seconds

Single press the Power button

Single press the Power button

Single press the Power button

Press and hold the Power button
for 2 seconds

Press and hold the Power button
for 2 seconds. There will be a
single tone to indicate the calls
have been switched.

Single press the Power button

USING THE MATRIX2 HEADPHONES (Continued)

Controlling Media Playback

1

You may need to focus on the media player application for initial playback to start.

2

Not all media players support this functionality.

Note: If you answer or make a call while listening to media, the media will be
paused until the call has ended.

Status

No media playing

1

Media playing

Either media
playing or stopped

2

Function

Play media

Pause media playback

Skip to next track

Restart the
track/previous track

Operation

Press the Play/Pause button

Press the Play/Pause button

Press the Next button

Press the Previous button

Additional Functionality

Action / Status Button Function Sounds

Activate voice command / dialing1Single press the Power button Short tone

Redial last call

1

Double-press the Power button Short tone

1

Not all devices support this functionality. For more information, refer to the user manual

for your device.

7

MULTIPOINT

Multipoint Pairing

Multipoint allows two Bluetooth devices to be connected to the Air-Fi Matrix2
simultaneously. Both devices will need to be paired before multipoint can
be used.

To use two Bluetooth devices with the Air-Fi Matrix2, first pair them by
following the pairing procedure described in the Pairing with Bluetooth
devices section for each device and then turn off the headset.

When turned on again, the Air-Fi Matrix2 will automatically attempt to connect
to the 2 most recently-paired devices, as long as they have Bluetooth enabled
and are within range. If a device that has already been paired does not
connect automatically, select “Air-Fi Matrix2” from the Bluetooth menu of the
device.

If you no longer wish to connect to multiple devices, disable Bluetooth on
the device you do not want connected to the Air-Fi Matrix2 or remove the
“Air-Fi Matrix2” pairing from the Bluetooth menu of the device.

Multipoint Functionality

Status Function Operation

Media playing
on one device

Play media on
other device

Pause audio playback on the active device and start
audio playback on the other connected device*

*It may take up to 60 seconds for audio to switch

Note: Incoming calls will always take precedence over media. If media is
playing on one device and an incoming call is received on the other device,
the Air-Fi Matrix2 will pause the media on the active device and activate
the device with the incoming call. Once the call is ended, the Air-Fi Matrix2
will reactivate the original device and resume playback (with most media
applications).

For phone call controls, see the Controlling Phone Calls section.

USING AS A WIRED HEADPHONE

The Air-Fi Matrix2 comes with a 3.5mm audio jack on the left ear cup and

an audio cable for wired use. This allows use with in-flight entertainment
devices, devices that don’t have Bluetooth or aren’t paired, or when the
battery is depleted.

The Air-Fi Matrix2 can be used wired while still connected via Bluetooth to
another device. Bluetooth audio takes precedence over wired audio; if a
Bluetooth device is connected while listening to wired audio, wired audio
will partially mute when audio is transmitted via Bluetooth. Wired audio will
resume approximately 10 seconds after the Bluetooth transmission ends.

SAFETY AND CARE

When not in use, power the headphones off and store in the included
protective pouch.

Clean with a soft cloth, damp with diluted soap water solution if
necessary. Never use chemical cleaners.

There are no user replaceable/reparable parts in the headset.
Disassembling it will void your warranty.

Do not expose the headphones to liquids. If submersed in water, do not
turn the device on until completely dried.
Note: liquid submersion voids the warranty.

Battery performance will be severely decreased when stored in extreme
temperatures: below -10°C/14°F or above 45°C/113°F.

a)

b)

c)

d)

e)

SPECIFICATIONS

See the Air-Fi Matrix2 product page at www.meelec.com for product
specifications.

TROUBLESHOOTING

Please visit www.meelec.com/bluetooth for the troubleshooting information

WARRANTY

The Air-Fi Matrix2 is covered by a 1-year manufacturer warranty. For more
information, visit www.meelec.com/warranty.

8

www.meelec.com