Meelectronics M6, M6P Quick Manual

M6 and M6P
In-Ear Sports Headphones with Memory Wire
visit www.meelec.com/fit
for fitment video and additional info
For a demonstration, visit meelec.com/fit Contact support@meelec.com if you have any issues.
Incorrect wear will result in poor fit and sound!
CABLE MANAGEMENT
Tighten the cable cinch and use the shirt clip to control cable movement during activities
MICROPHONE & REMOTE USE (M6P ONLY)
The M6P model includes an inline remote with a built-in microphone, button, and universal volume control.
Most smartphones are compatible with the remote and additional functions are available with Apple® and some Android™ devices.
Visit meelec.com/phone for complete compatibility and functionality.
Button Functionality for iPhone® and Android phones:
REMOVAL AND REINSERTION DURING WORKOUT USE:
If you must remove and reinsert the earphones while working out, dry your ears before reinsertion to avoid getting sweat in the nozzle. Sweat will cause the earphones to slip out and may lead to a temporary reduction/loss of sound.
CARE AND CLEANING
CLEAN REGULARLY AS FOLLOWS:
WARNING
Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
Visit www.osha.gov for more info.
SAFETY TIPS
It is advised to turn the volume on your device all the way down before connecting your headphones, then gradually increase the volume until you reach a comfortable listening level.
TROUBLESHOOTING
Visit meelec.com/troubleshooting for solutions to common issues.
WARRANTY
MEElectronics earphones purchased from authorized retailers are covered by a manufacturer warranty. Visit meelec.com/warranty for warranty information.
MEElectronics and its logo are registered trademarks of S2E, Inc. All rights reserved. iPhone® is a registered trademark of Apple Inc. Android™ is a registered trademark of Google Inc.
EAR TIPS: SELECT CORRECT SIZE
If you your music sounds tinny or lacks bass, try different ear tips.
FIRST USE: MEMORY WIRE CONFIGURATION
CORRECT
cable over-the-ear
and earphone flush
in the ear
INCORRECT
earphone
not flush
in the ear
INCORRECT
cable
hanging
down
6 sets of ear tips are included to ensure you get
the best fit, comfort, and sound.
Select ear tips that:
Install ear tips as shown. Make sure ear tip is installed tightly before use.
Allow the earphone to fit flush in your ear Seal with your ear canal and reduce outside noise when inserted
2.
Bend the memory wire around your ear.
3.
The cable should hang down. The fit should be comfortable and secure.
1.
With memory wire straight, put the earpiece in your ear and move it around until it seals in your ear canal and the earphone is flush in your ear.
cable cinch
move cable cinch
Volume Control:
For maximum volume, move the slider to the + position
universal volume control
remote button
microphone
maximum volume setting
eartip stalk
Phone Mode
Incoming phone call
Phone call in progress
Button Press
Single Press
Single Press
Action
Answer phone call
End call
Do not remove from ears or headphone jack by pulling on the cable. Use the included carrying case when not in use.
Put a small amount of rubbing alcohol or hydrogen peroxide on a cotton swab Remove the ear tips from your earphone and push the cotton swab through the center of the ear tips. Clean the outside of the ear tips Swab around the nozzles of the earphones Wait for the earphones and ear tips to dry completely Put the tips back on the earphone
ENGLISH
shirt clip
Loading...