MEElectronics EP-M6PRO-CL-MEE User manual

UNIVERSAL-FIT NOISE-ISOLATING

MUSICIAN’S IN-EAR MONITORS

model: M6PRO-CL

USER MANUAL

Please read this manual in its entirety to ensure best fit and sound.

PACKAGE CONTENTS

NOISE-ISOLATING

MUSICIAN’S

IN-EAR MONITORS

M6 PRO
In-Ear
Monitors

Protective
carrying
case

Spare
cable

Silicone
eartips
(6 pairs)

V
I

N

U

S

U

M

o

m

U

NO

T
I
F

­L

A

S
R
E

E

-

IN

S

’

N
A
I

C
I

L

C

­O
R

P
6
M
:
l

e
d

UAL

N

A
M
R

E
S

G
IN
T

A
L

O

IS

-

E
S
I

S

R
O
T
I

N

O

M
R
A

¼” (6.3mm)
adapter

Comply™
T200 Memory
Foam eartips

Shirt
clips (2)

User
manual

1

FIRST USE:

ATTACHING THE EARPIECES

The M6 PRO includes two detachable, interchangeable cables

1. STEREO AUDIO CABLE

Engineered for maximum performance, the stereo cable features a
reinforced plug and internal braiding for strength and tangle-resistance.
A gold-plated ¼” (6.3mm) stereo adapter is included to ensure
compatibility with a wide range of gear.

2. HEADSET CABLE

The headset cable incorporates a microphone, remote button, and
universal volume control for compatible phones and tablets (see
MICROPHONE & REMOTE USE section on p. 13 for more info)

Before using the earphones, select your desired cable and attach the
earpieces as shown on page 3. Make sure to attach the cable connector
marked “R” to the right earpiece and the connector marked “L” to the left
earpiece.

L

L

R

R

continue to next page

2

FIRST USE:

ATTACHING THE EARPIECES (Continued)

notch

groove

Attach the cable by lining up the notches on the connector with the
matching grooves on the earpieces as shown. Push connectors in

1.1

until they fit securely.

To detach the cable, grasp the earpiece and cable connector firmly,

1.2

and pull straight apart without twisting.

3

CONFIGURING FOR YOUR EARS:

EARTIPS

Multiple sets of eartips are included to ensure you get the best fit with
your headphones. We recommend trying all of the included eartips.
If you experience tinny sound or a lack of bass, try different eartips.

The correct eartip for your ear will:

• Allow the earphone to fit flush in the ear

• Seal with your ear canal and reduce outside noise when inserted

• Provide good bass response

1

2

3 4

Install eartips as shown. Make sure eartips are installed securely before use.

4

CONFIGURING FOR YOUR EARS:

TM

Comply

MEMORY FOAM EARTIPS

Inserting the Premium Earphone Tip

Install Comply eartips as shown on page 4.

1. Roll the tip into a thin, round cylinder.

2. Pull back and up on the ear to open the
canal. Gently insert the entire tip into the ear.

3. Hold the tip in place until it expands.

Changing the Premium Earphone Tip

Remove old tip and discard it. Clean earphone
nozzle of any debris. Securely apply the new

TM

Comply

Premium Earphone Tip onto clean,
dry nozzle. Recommended replacement is after
3 months of regular use.

For replacement tips, go to complyfoam.com

The
M6 PRO is the T200.

TM

Comply

eartip size included with the

5

CONFIGURING FOR YOUR EARS:

MEMORY WIRE

M6 PRO earphones feature an over-the-ear fit with a flexible “memory wire”
section located near the earpieces. Using the memory wire correctly will ensure
the most comfortable and secure fit.

Identify the right and left earpieces. They are not interchangeable.

1.1

Straighten the memory wire and put each earpiece in the

1.2

corresponding ear.

continue to next page

6

CONFIGURING FOR YOUR EARS:

MEMORY WIRE (Continued)

Adjust earpiece until it fits flush in your ear and the eartip seals in

2.1

the ear canal.

Holding the earpiece in place, bend the memory wire around your

2.2

ear to achieve a conforming fit.

7

continue to next page

CONFIGURING FOR YOUR EARS:

MEMORY WIRE (Continued)

While pulling the cable gently with one hand, squeeze the memory

3

wire behind your ear with the other hand until the fit is tight and
secure

continue to next page

8

CONFIGURING FOR YOUR EARS:

MEMORY WIRE (Continued)

cable cinch

slide the
cable cinch up

Tighten the sliding cable cinch to fix the earphones in place for the

4.1

most secure fit

shirt clip
holds cable
in place

Use the shirt clip to control cable movement

4.2

9

continue to next page

CONFIGURING FOR YOUR EARS:

MEMORY WIRE (Continued)

Stereo cable can be worn behind back for greater freedom of

5.1

movement

When worn correctly, the earphone sits flush in the ear and the

5.2

cable is secure behind the ear

10

CONFIGURING FOR YOUR EARS:

SUBSEQUENT USE

After first use, the memory wire will retain its approximate shape for easier
future installation.

pull
over
ear

To put the earphones on, pull the earpieces over from behind the

1

ear, placing the memory wire over the ear.

11

continue to next page

CONFIGURING FOR YOUR EARS:

SUBSEQUENT USE (Continued)

Insert the earpieces into your ears and adjust until a seal is achieved.

2.1

Squeeze the memory wire behind your ear until the fit is tight and

2.2

secure. Use the cable cinch and shirt clip to control cable movement.

Note: When removing and re-inserting the earphones, avoid getting sweat in
the nozzle as this may lead to a temporary reduction/loss of sound.

12

MICROPHONE & REMOTE USE

The headset cable includes an inline remote, microphone, and volume control.

Basic Remote Operation

for iPhone®, iPad®, iPod® and Android™ phones:

Answer incoming phone call Press the remote button

End phone call Press the remote button

Play media*

Pause media

Skip to next track**

Restart the track/previous track**

*You may need to open the media player application for initial playback to start.
**Not all media players support this functionality.

Function Operation

Press the remote button

Press the remote button

Double-press the remote button

Triple-press the remote button

Additional remote functions are available with

Apple® and some Android devices. Visit meelec.com/phone

for complete compatibility and functionality.

VOLUME CONTROL

For maximum volume, move the slider to the + position.

universal volume control

remote button

microphone

maximum volume setting

13

CARE AND CLEANING

• Do not remove from ears or unplug by pulling on the cable.
Always grasp the plastic part of the plug or earpieces

• If necessary, clean the earphones with a small amount of hydrogen
peroxide on a cotton swab. Swab only the outside of the earphone.
Eartips can be removed and rinsed under running water or in hydrogen
peroxide. Allow earphones and eartips to dry completely before
resuming use.

WARNING

Using headphones at high to moderate volumes for extended periods of
time will result in permanent hearing damage. It is advised you keep volume
levels moderate to low at all times for your safety. Do not use while driving a
car, cycling, operating machinery, or performing other activities that require
hearing surrounding sounds.

It is advised to turn the volume on your device all the way down before
connecting your headphones, then gradually increase the volume until you
reach a comfortable listening level.

TROUBLESHOOTING

Visit www.meelec.com/troubleshooting for solutions to common issues.

WARRANTY

MEElectronics earphones purchased from authorized retailers are covered by
a 1-year manufacturer warranty.

For more information, visit www.meelec.com/warranty

LIFETIME REPLACEMENT

Things don’t always go according to plan the real world. Whether your
headphones get crushed, shredded, fried, misplaced, or carried off by army
ants, we’ve got you covered. Just tell us what happened and we’ll give you a
new pair at half price, no questions asked (note: we reserve the right to ask for
more of a great story).

Visit www.meelec.com/LR for more information or to request a replacement.

14

MEElectronics and its logo are registered
trademarks of S2E, Inc. All rights reserved.

iPhone®, iPad®, iPod®
are a registered trademark of Apple Inc.
Android™ is a registered trademark of Google Inc.
© 2014 Hearing Components. Comply is a trademark
of Hearing Components.

www.meelec.com