© 2013
MeeBoss Technology Inc.
MeeBoss Multimedia Player
User Manual
Mee-M100
MeeBoss Multimedia Player
FCC Regulations:
15.19(a)(3):
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
15.105(b):
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s
authority to operate the equipment.
*The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
MeeBoss Multimedia Player
Table of Contents
1. MeeBoss Multimedia Player ............................................................................................. 5
1.1 Device Overview ...................................................................................................... 5
2. Quick Installation .............................................................................................................. 6
3. System Settings ................................................................................................................ 8
3.1 Network .................................................................................................................. 8
3.2 Language ............................................................................................................... 10
3.3 System ................................................................................................................... 10
4. Media Playback .............................................................................................................. 12
4.1 Playback from USB Storage ................................................................................... 12
4.2 Playback from iOS Mobile Device .......................................................................... 13
4.3 Playback from Android Phone ............................................................................... 14
4.4 Miracast ................................................................................................................ 19
5. MeeVideo App ............................................................................................................... 22
6. Troubleshooting ............................................................................................................ 24
MeeBoss Multimedia Player
MeeBoss Multimedia Player
1. MeeBoss Multimedia Player
1.1 Device Overview
Multimedia Player Dongle x1
Micro USB Cable x1
USB Power Adapter x1
Remote Control Receiver x1
Remote Control x1
Installation Guide x1
1. Power – power on/off the device
2. Function – toggle between different functions
3. OK – press to confirm selection
4. Up
5. Down
6. Left
7. Right
8. Return – return to previous menu page
9. Home – return to main menu page
10. Volume up
11. Volume down
To get started with your MeeBoss Multimedia Player, please follow the instructions below:
1. Connect the micro-USB cable to the MeeBoss Multimedia Player (dongle), and the power adapter to a
power outlet.
M100:
2. Connect the MeeBoss Multimedia Player dongle to an HDMI port on your TV.
M100:
3. Connect the remote control receiver to the USB port on the dongle. (Note: This step is for M100 only.)
4. Turn on your TV, and select a correct input source, i.e. HDMI.
5. A MeeVideo main menu shall appear immediately.
Use the MeeBoss remote control to switch between functions in main menu on screen.
Once installation is complete, please proceed with the following settings:
1. Wi-Fi network setup.
(see Chapter 3: System Settings > Network for more details)
2. Download of MeeVideo app on iOS mobile device
3. Download of MeePlayer Lite app on Android phone
3. System Settings
Once your device is correctly installed, use the MeeBoss remote control to toggle Settings on the MeeVideo
main menu to make further configurations:
3.1 Network
1. In Settings page, select Network to complete network connection via Wi-Fi.
2. In Network page, select one from available networks to get connected via Wi-Fi.
Press OK on remote control to confirm your selection.
A keyboard may appear to prompt you for password entry if needed.
3. Once connected, you may see the details of the network connected.