mee audio X20 User Manual

X20

TRULY WIRELESS

ACTIVE NOISE CANCELLING

IN-EAR HEADPHONES

X20 SETUP GUIDE

Scan QR code or visit:

MEEaudio.com/X20Support

POWERED BY

GETTING STARTED

Package Contents

X20 Truly Wireless

Earphones

Eartips

(3 Pairs)

Charging

Case

USB-C Charging

Cable

STEP 1: CHARGING

Connect charging
case to a USB port
or wall adapter
using the included
USB cable.

OR

Place both earpieces in the case and close the lid
or press the button on the case to charge.

1.5

hrs

OR

Charging Case Indicator Lights

Charging: Blinking Red Charged: Solid White

Earpiece Indicator Lights

Charging:
Solid White

Charged:
Lights off

STEP 2: PAIRING

Remove both earpieces from the case. Open the

Bluetooth menu
on your device
and select “MEE
audio X20”.

The right
earpiece will

automatically
enter Bluetooth
pairing mode.

AT&T LTE

Settings

Bluetooth

MEE audio X20

12:26 PM

Bluetooth

95%

Earpiece Indicator Lights

Pairing mode is indicated
by flashing alternating
blue and white lights

Earpiece Indicator Lights

Once pairing is complete,
a blue light will blink
intermittently

STEP 3: FITTING

Select the eartips with the best sound and
comfort for your ears.

Identify the left and right earpieces.

LEFT RIGHT

Put each earpiece in the corresponding ear.

Adjust each earpiece until it fits flush in your ear and
the eartip seals the ear canal. If your music sounds
tinny or lacks bass, try different eartips.

STEP 4: ACTIVE NOISE CANCELING (ANC)

Press and hold the touch panel on either earpiece
for 2 seconds to enable or disable the Active
Noise Canceling (ANC) function. A voice prompt
will provide the ANC status.

OR

LEFTRIGHT

HOLD touch panel on either earpiece for 2 secs

STEP 5: POWERING OFF

When done listening, place both earpieces back in
the case and close the case lid.

Note: If earpieces are sweaty or damp, allow
them to fully dry before storing them in the case.

SUBSEQUENT USE

When removed from the charging case, the X20
reconnects automatically to the last paired Bluetooth
device that is in range.

To reconnect manually, open the Bluetooth menu on
your device and select “MEE audio X20” from the
Bluetooth device list.

You can also use either earpiece as a single-ear
headset by leaving the other earpiece in the case.

FUNCTIONALITY & CONTROLS

Power On

LEFTRIGHT LEFTRIGHT

remove

from case

OR OR

HOLD touch panel on

each earpiece for 3 secs

Play / Pause

1x 1x

OR

LEFT RIGHT

TAP touch panel on either earpiece

Siri® / Google Assistant™ / Voice Control

Power Off

place in case and

close lid

Turn ANC On / Off

LEFT RIGHT

HOLD touch panel on either earpiece for 2 secs

Previous Track

HOLD touch panel on

each earpiece for 10 secs

OR

Next Track

2x 2x

OR

RIGHTLEFT LEFT

TAP touch panel on either earpiece 2x

Answer / End Call Reject Call

1x 1x

OR

LEFT RIGHT

TAP touch panel on either earpiece

3x

TAP touch panel

on left earpiece 3x

2x 2x

TAP touch panel on either earpiece 2x

3x

TAP touch panel

on right earpiece 3x

OR

RIGHT

RIGHTLEFT

PAIRING NEW DEVICES

When removed from the charging case, the X20 will automatically enter Bluetooth
pairing mode if a previously paired device is not found. Select “MEE audio X20” in the
Bluetooth menu of the new device you wish to pair to complete the pairing process.

To manually enter pairing mode:

Remove right earpiece from case, press and hold
the touch panel for 10 seconds to power it off,
release the touch panel, then press and hold it again
for 5 seconds again until the blue and white lights
flash indicating pairing mode.

Earpiece Indicator Lights

Pairing mode is
indicated by flashing
alternating blue and
white lights

Select “MEE audio X20”
in the Bluetooth menu of
the new device you wish
to pair to complete the
pairing process.

12:26 PM

AT&T LTE

Settings

Bluetooth

MEE audio X20

Bluetooth

95%

TROUBLESHOOTING

A factory reset can be used to restore all features to their factory settings and delete all
previous Bluetooth pairings from memory.

1) Place both earpieces in the case
and close the lid

3) Release the button
and allow the reset
process to complete

2) Open the lid, then press and
hold the reset button on the
case for approximately 10
seconds, until you see a
solid white light on both
earpieces

4) Once you see alternating blue and
white lights on the right earpiece
indicating that the earphones are in
pairing mode, follow the instructions in
the “PAIRING” section to create a new
pairing with your device

WARRANTY

MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty.
For more information, contact your local MEE audio dealer or visit MEEaudio.com/Support

WARNINGS

Using headphones at high volumes for extended periods of time will result in permanent hearing damage. It is
advised you keep volume levels moderate to low at all times for your safety. Turn the volume all the way down
after connecting your earphones, then gradually increase the volume until you reach a comfortable listening
level. Do not use headphones while driving a car, cycling, operating machinery, or performing other activities
that require hearing surrounding sounds.

Keep the device and packaging out of reach of children.

This device is designed and manufactured to operate within its defined design limits. Misuse may result in
electric shock or fire. Read and follow these instructions carefully.

•

If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the
warranty.

•

Danger of explosion or fire if batteries are damaged. Keep away from direct sunlight, naked flames,
flammable gasses, or heat sources such as radiators or stoves

•

Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or
above 45°C/113°F including direct sunlight

•

Do not use around flammable gasses as fire or explosion may occur.

•

There are no user replaceable/reparable parts in the device. Disassembling it will void your warranty.
Only use attachments/accessories specified by the manufacturer

Changes or modifications to this unit not expressly approved by MEE audio could void the user’s authority to
operate the equipment.

COMPLIANCE INFORMATION

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

FCC RULES

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

Relocate the receiving antenna.

•
Increase the separation between equipment and receiver.

•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•
Consult the dealer or an experienced radio/TV technician for help.

•

DISPOSAL AND RECYCLING

Dispose of this product in accordance with all local laws and regulations. Because this product contains
electronic components and a battery, it must be disposed of separately from household waste. Contact local
authorities to learn about disposal and recycling options.

FOR ADDITIONAL SUPPORT

VIEW OUR VIDEO SETUP GUIDE

Scan QR code or enter the URL
below into your web browser:

MEEaudio.com/X20Support

QUESTIONS?

WE’RE HERE TO HELP!

Phone Support: 626-965-1008

Monday ~ Friday 9:00 am to 5:00 pm PST

Email Support: [e-mail]

All emails are responded to within 2 business days