USER MANUAL
Bluetooth® Wireless
headphone system for tv
Includes Bluetooth Wireless audio Transmitter
and Wireless Neckband In-Ear Headphones
www.MEEaudio.com/T1N1
CONNECT SUPPORT GUIDE
Visit
MEEaudio.com/ConnectHelp
easy-to-follow setup videos, full user manuals,
and the latest troubleshooting information.
for
Bluetooth® Wireless
headphone system for tv
FOR ADDITIONAL SUPPORT
View and download complete user manuals for
•
Connect transmitter and N1 headphones at
MEEaudio.com/Support
View our Connect Support Guide at
•
MEEaudio.com/ConnectHelp for easy-to-follow
setup videos and troubleshooting information
Contact us at support@MEEaudio.com
•
PACKAGE CONTENTS
CONNECT
Bluetooth Transmitter
3.5mm to RCA
adapter
3.5mm audio cable
N1 Bluetooth
Stereo Headphones
TOSLINK digital optical
S/PDIF audio cable
3 pairs of eartips
2 x Micro-USB
charging cable
1
PLUG USB POWER CABLE INTO TRANSMITTER
plug into AC
adapter, TV,
or computer
USB port
CONNECT
2
hrs
N1
CHARGE HEADPHONES
2
POWER ON TRANSMITTER
A
OFF
ON
A OFF ON A OFF ON
HOLD
POWER ON HEADPHONES
3
seconds
3
CONNECTION IS ESTABLISHED
B
solid blue light on transmitter
indicates connection
IF NO SOLID BLUE LIGHT, PERFORM PAIRING
PROCEDURE IN STEP 6
4. choose an audio cable supported
by your tv
OPTICAL S/PDIF [DIGITAL]
remove
protective caps
plug the
optical cable
into TV’s digital
audio output
A
OFF
ON
AUDIO OUPUT
OPTICAL
R L
AUDIO OUPUT
OPTICAL
IF TV AUDIO PLAYS FROM HEADPHONE,
SETUP IS COMPLETE. PROCEED TO STEP 5.
NO SOUND? CHECK TV SETTINGS MENU.
†
settings
Sound / Audio
digital Audio Output
select “PCM / Stereo” in the audio
output settings menu* of your TV
if sound is still not audible, select “PCM / Stereo” in the audio output
*
settings menu(s) of your video streaming app(s) and/or device(s)
auto
dolby digital
pcm / stereo
DTS
PROCEED TO STEP 5
†
EXACT MENU AND ITEM NAMES MAY VARY BETWEEN TVS
4. choose an audio cable supported
by your tv
RCA
A
OFF
ON
plug the stereo
AUDIO OUPUT
OPTICAL
R L
AUDIO OUTPUT
R L
cable into RCA
adapter and
connect to TV’s
red/white RCA
jacks labeled
“AUDIO OUT”
IF TV AUDIO PLAYS FROM HEADPHONE,
SETUP IS COMPLETE. PROCEED TO STEP 5.
NO SOUND? CHECK TV SETTINGS MENU.
†
settings
sound / audio
fixed
Analog audio out
variable
select “Variable” in the audio output
settings menu of your TV
settings
sound / audio
on
tv speakers
set TV’s internal speakers to “OFF”
off
PROCEED TO STEP 5
†
EXACT MENU AND ITEM NAMES MAY VARY BETWEEN TVS
4. choose an audio cable supported
by your tv
3.5MM [HEADPHONE JACK]
Volume max vol+
maximize the volume on your TV
plug the stereo
cable into TV’s
headphone
jack
AUDIO
A
OFF
ON
headphone
jack may be
located on
front, side, or
rear of TV
5
ADJUSTING HEADPHONE VOLUME
TAP
to increase
volume
TAP
to decrease
volume
WHEN FINISHED, POWER OFF
HEADPHONES UNTIL NEXT USE
HOLD
3
seconds
POWER OFF HEADPHONES
6
ADDITIONAL INFORMATION
N1
PRODUCT OVERVIEW
Volume up /
skip track
button
Micro-USB
charging
Multifunction
button
Volume down /
previous track
button
port
Status
indicator
light
6
ADDITIONAL INFORMATION
STEP 1: SELECTING EARTIPS
Select the eartips with the best
sound and comfort for your ears.
If your music sounds tinny or
lacks bass, try different eartips.
6
ADDITIONAL INFORMATION
STEP 2: WEARING THE N1
Wear neckband so that controls are facing upwards
and place each earpiece in the corresponding ear.
6
ADDITIONAL INFORMATION
STEP 2: WEARING THE N1 (CONTINUED)
Adjust each earpiece until it fits flush in
your ear and the eartip seals the ear canal.
6
ADDITIONAL INFORMATION
STEP 2: WEARING THE N1 (CONTINUED)
When not in use,
clip earphones
together using
built-in magnets.
6
ADDITIONAL INFORMATION
STEP 3. PAIRING WITH OTHER DEVICES
The N1 can be used as a headset when connected to
phones and tablets. It will first need to be paired with
each device by following the procedure below:
Press and hold the
Multifunction button for about
7 seconds until you hear the
headset say “Pairing” and the
light flashes red and blue.
6
ADDITIONAL INFORMATION
STEP 3. PAIRING WITH OTHER DEVICES (CONTINUED)
Open the Bluetooth menu on the device you wish to pair
(usually located in Settings > Bluetooth). If needed, select
“search for devices”, “add new device”, or “refresh”.
AT&T LTE
Settings
Bluetooth
Devices
Searching...
12:26 PM
Bluetooth
95%
6
ADDITIONAL INFORMATION
STEP 3. PAIRING WITH OTHER DEVICES (CONTINUED)
Select “MEE audio N1” and allow pairing to complete.
Use “0000” if a pin is required.
Visit the Bluetooth Support Page at
MEEaudio.com/Bluetooth for additional Bluetooth pairing
and setup information.
Note: Once paired, N1 will automatically reconnect to the
paired device each time it is powered on. To pair a new
device, first turn off Bluetooth on any devices nearby that
have previously been paired with the N1.
AT&T LTE
Settings
Bluetooth
MEE audio N1
12:26 PM
Bluetooth
95%
6
ADDITIONAL INFORMATION
CONTROLS WITH PHONES AND TABLETS
Volume Up / Skip Track button
[TAP]
[HOLD 2 sec]
- Increase Volume
- Next Track
Multifunction button
[HOLD 3 sec]
[HOLD 2 sec]
[DOUBLE TAP]
[HOLD 2 sec]
[HOLD 3 sec]
Volume Down / Previous Track button
[HOLD 2 sec]
[HOLD 2 sec]
- Power On
- Play / Pause (during media playback*)
[TAP]
- Answer Incoming Call / End Call
[TAP]
- Reject Incoming Call
- Redial**
- Activate Siri
- Power Off
[TAP]
- Decrease Volume
- Previous Track
- Mute / Unmute Microphone
(during phone call)
®
/ Voice Command**
You may need to bring
*
your music player
application up on the
screen for media
playback to start
Not all devices support
**
this functionality
6
ADDITIONAL INFORMATION
PAIRING A HEADPHONE
This procedure is used to pair an additional headphone
or speaker with the Connect, or to re-pair the N1.
Make sure your Bluetooth headphone or speaker is
turned off. Put it in pairing mode. Consult the user
manual of the headphone or speaker if you are not sure
how to enter pairing mode.
Once the headphone or speaker is in pairing mode,
click pairing button “A” located on the side of the
Connect (use pairing button “B” when pairing a second
headphone or speaker). A blue light will blink rapidly on
the top of the unit to indicate that the Connect is ready
to pair. Once paired, the light will turn solid blue.
FACTORY RESET/CLEAR MEMORY
The Connect can be reset by holding pairing button “A”
for approximately 5 seconds, until the blue indicator
light stops blinking. All previously paired devices will be
cleared from memory and a new pairing will need to be
created by following the procedure in the previous step.
SAFETY AND CARE
Battery performance will be severely decreased when stored
•
in extreme temperatures: below -10°C/14°F or above
45°C/113°F including direct sunlight.
The lifetime of the battery will be significantly reduced if your
•
device is not charged for a long time. It is recommended to
charge your device at least once a month.
Clean with a soft, slightly damp cloth. Do not use chemical
•
cleaners.
There are no user replaceable/reparable parts in this device.
•
Disassembling it will void your warranty.
Do not expose the device to liquids. If the device comes in
•
contact with liquids, quickly wipe away.
If submersed in water, do not turn the device on until
completely dried.
Note: liquid submersion voids the warranty.
Do not use around flammable gasses as fire or explosion
•
may occur.
WARNING
Using headphones at high to moderate volumes for extended periods of time
will result in permanent hearing damage. It is advised you keep volume levels
moderate to low at all times for your safety. Do not use while driving a car,
cycling, operating machinery, or performing other activities that require
hearing surrounding sounds.
Keep the device and packaging out of reach of children.
WARRANTY
MEE audio products purchased from authorized resellers
are covered by a 1-year manufacturer warranty.
For more information, visit www.MEEaudio.com/Support
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
Siri® is a registered trademarks of Apple Inc.
The Bluetooth
SIG, Inc. and any use of such marks by MEE audio is under license. Other trademarks
and trade names are those of their respective owners.
®
word mark and logos are registered trademarks owned by Bluetooth
QUESTIONS?
WE’RE HERE TO HELP!
Phone Support: 626-965-1008 x31
Monday ~ Friday 9am to 5:30pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days
Loading...