mee audio T1H1 User Manual
USER MANUAL
English
HD WIRELESS SOUND FOR YOUR HDTV
BLUETOOTH WIRELESS HEADPHONE
SYSTEM FOR TV
Model: T1H1
BLUETOOTH SUPPORT PAGE
Please visit the Connect Support Guide at
www.MEEaudio.com/ConnectSupportGuide
for easy-to-follow video setup guides and
the latest troubleshooting information.
P OWER ED B Y Q ual c o mm apt X® AND B l uetooth
®
ENGLISH
PACKAGE CONTENTS
B
Bluetooth
Transmitter
3.5mm
to RCA
adapter
2 x Micro-USB
charging cable
TOSLINK digital
optical S/PDIF
audio cable
3.5mm
audio cable
Venture2
Stereo Bluetooth
Headphones
PRODUCT OVERVIEW
Universal Dual Headphone
®
Wireless Audio Transmitter
Bluetooth
1
2
3
1
Pairing button “B”
2
Indicator light “B”
3
Indicator light “A”
4
Pairing button “A”
5
On/Off switch
Stereo Wireless Bluetooth®
Headphones
4 5
6
Analog audio input (3.5mm)
7
Digital audio input (TOSLINK
optical S/PDIF)
8
Power/charging indicator light
9
Micro-USB power/charging
port
6
7
8
9
USER MANUAL
English
HD WIRELESS SOUND FOR YOUR HDTV
BLUETOOTH WIRELESS HEADPHONE
SYSTEM FOR TV
Model: T1H1
BLUETOOTH SUPPORT PAGE
Please visit the Connect Support Guide at
www.MEEaudio.com/ConnectSupportGuide
for easy-to-follow video setup guides and
the latest troubleshooting information.
POWERED BY Q ual c o mm apt X® AND Bluetooth
User
manual
®
Left Earcup
A Microphone
B LED indicator
C Power / multifunction
D Volume down
E Volume up
F 3.5mm audio jack
Right Earcup
G USB port for
charging
H Previous track
I Play / pause
J Next track
STEP 1: POWERING ON
When used while plugged in to USB, the
internal battery will be charged. When unplugged from USB power, the
will use its internal battery. Please allow the unit to charge fully before using it on
battery power for the first time.
A. Plug the included Micro-USB charging cable into a powered USB port** and
the charging/power port of the
B. The green charging indicator light will pulse slowly while the
charging. Charging time is approximately 90 minutes.
C. Slide the power switch to the “on” position to turn the
D. When unplugged from USB power, the
When the battery is low, the green power LED will blink once every second.
Note: When using USB power, there is no need to turn the
Connect
off after each use.
**The USB outputs of some TVs do not provide a stable current.
It is recommended to use a computer or USB wall charger to charge the
Connect
.
Connect
Connect
will use USB power and the
.
Connect
Connect
will use its internal battery.
Connect
on.
Connect
is
STEP 2: CONNECTING TO TV
The
Connect
a wide range of devices. Consult the user manual for your TV/audio device to
determine the appropriate audio output.
OPTION 1: DIGITAL OPTICAL AUDIO OUT (TOSLINK)
Newer TVs are usually outfitted with a TOSLINK digital
optical (S/PDIF) audio out connector.
A. Remove the protective caps from the
included fiber optic TOSLINK cable.
B. Plug the cable firmly into the optical audio output on the TV and the optical
input of the
Note: If you have successfully connected the TOSLINK cable and you are still not
receiving any sound, please make sure that your audio output settings on your TV, DVR,
or other similar device are set to “PCM”.
features three different connection options for compatibility with
Connect
.
CHARGING
Connect micro-USB cable to Venture2 charging port and powered-on computer or USB
charger.
Charge time is approximately 2 hours. The red charging indicator light will turn off once
fully charged.
Low battery is indicated by a solid red status indicator light and “battery low” voice
notification once every 3 minutes.
®
devices such as the iPhone®, iPad®, and iPod touch® will also display an on-
Apple
screen headset battery indicator near the top right corner of the screen when the
Venture2 is connected.
battery indicator
CONNECTING WITH OTHER DEVICES
The Venture2 can be connected with other Bluetooth audio devices such as phones
and tablets by following the pairing procedure in the Bluetooth Pairing section. The
headset only needs to be paired once with each new device.
Loading...