Page 1
OPEN EAR WIRELESS SPORTS HEADPHONES
AIRHOOKS
SETUP GUIDE
Scan QR code or visit:
MEEaudio.com/AirHooksSupport
WARNING:
Using headphones at high to moderate volumes for
extended periods of time will result in permanent hearing damage.
Do not use while driving a car, cycling, operating machinery, or
performing other activities that require hearing surrounding sounds.
Page 2
GETTING STARTED
Package Contents
AirHooks Open Ear
Headphones
USB Charging
Cable
Page 3
HOW TO WEAR
Page 4
FUNCTIONALITY & CONTROLS
Basic remote operation with mobile devices:
Function
Power On
Power Off
Volume Up
Volume Down
Play / Pause
Answer / End Call
Mute / Unmute Call
Reject Call
®
Activate Siri
Google Assistant
Voice Command
Reset
Operation
Press and hold for 3 secs
Press and hold for 5 secs
Double-press
Triple-press
Single press
Single press
Press and hold for 2 secs
Double-press
Press and hold for 2 secs.
/
™
Note: upon release, you will hear
/
two tones confirming that voice
command has been activated
While powered off, press and hold
for 10 secs until you hear two tones
Page 5
PAIRING
The AirHooks will automatically enter pairing mode
when powered on for the first time.
To power on, press and hold the power button for 3
seconds.
Pairing mode is indicated by the “Pairing” voice
prompt and flashing alternating white and green light.
Page 6
PAIRING
AT&T LTE
Settings
Bluetooth
MEE audio AirHooks
12:26 PM
Bluetooth
95%
Open the Bluetooth menu on your device and select
“MEE audio AirHooks”.
Once pairing is complete, the indicator light will stop
flashing and you will hear the “Connected” voice
prompt.
Page 7
SUBSEQUENT USE
When powered on, the AirHooks will automatically
reconnect to the last paired Bluetooth device and
you will hear the “Connected” voice prompt.
To reconnect manually, open the Bluetooth menu on
your device and select “MEE audio AirHooks” from
the Bluetooth device list.
PAIRING ANOTHER DEVICE
To pair the AirHooks to a new Bluetooth device, first
unpair the AirHooks from your original device using
its Bluetooth menu or turn off Bluetooth functionality
on the original device.
The AirHooks will automatically enter pairing mode if
a previously paired device is not found.
Select “MEE audio AirHooks” in the Bluetooth menu
of the new device you wish to pair to complete the
pairing process.
Page 8
FACTORY RESET
A factory reset can be used to restore all features to
their factory settings and delete all previous
Bluetooth pairings from memory.
1. Power off the AirHooks by holding down the button
for 5 seconds.
2. While powered off, press and hold the button for
10 seconds until you hear two tones, followed by
the voice prompt “Disconnected”. Once the reset
is complete, the AirHooks will automatically enter
pairing mode.
Page 9
FOR ADDITIONAL SUPPORT
VIEW OUR VIDEO SETUP GUIDE
Scan QR code or enter the URL
below into your web browser:
MEEaudio.com/AirHooksSupport
QUESTIONS? WE’RE HERE TO HELP!
Phone Support: 626-965-1008
Monday ~ Friday 9:00 am to 5:00 pm PST
Email Support: [email protected]
All emails are responded to within 2 business days
MEE audio
and its logo are registered trademarks of S2E, Inc. All rights reserved.
®
The Bluetooth
word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by MEE audio is under license. Other trademarks and trade
names are those of their respective owners.
®
Siri
is a registered trademark of Apple Inc. Google Assistant™ is a trademark of Google Inc.
Page 10
ADDITIONAL INFORMATION
COMPLIANCE INFORMATION
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC RULES
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•
Relocate the receiving antenna.
•
Increase the separation between equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
DISPOSAL AND RECYCLING
Dispose of this product in accordance with all local laws and
regulations. Because this product contains electronic components
and a battery, it must be disposed of separately from household
waste. Contact local authorities to learn about disposal and recycling
options.
WARRANTY
MEE audio products purchased from authorized resellers are covered
by a 1-year manufacturer warranty. For more information, contact
your local MEE audio dealer or visit MEEaudio.com/Support
WARNINGS
Using headphones at high volumes for extended periods of time will
result in permanent hearing damage. It is advised you keep volume
levels moderate to low at all times for your safety. Turn the volume all
the way down after connecting your earphones, then gradually
increase the volume until you reach a comfortable listening level.
Do not use headphones while driving a car, cycling, operating
machinery, or performing other activities that require hearing
surrounding sounds.
Keep the device and packaging out of reach of children.
This device is designed and manufactured to operate within its
defined design limits. Misuse may result in electric shock or fire.
Read and follow these instructions carefully.
If submersed in water, do not turn the device on until completely
•
dried. Note: liquid submersion voids the warranty.
Danger of explosion or fire if batteries are damaged. Keep away
•
from direct sunlight, naked flames, flammable gasses, or heat
sources such as radiators or stoves
Battery performance will be severely decreased when stored in
•
extreme temperatures: below -10°C/14°F or above 45°C/113°F
including direct sunlight
Do not use around flammable gasses as fire or explosion may
•
occur.
There are no user replaceable/reparable parts in the device.
•
Disassembling it will void your warranty.
Only use attachments/accessories specified by the manufacturer
•
Changes or modifications to this unit not expressly approved by MEE
audio could void the user’s authority to operate the equipment.
Loading...