Mee audio AF-T1B, AF-T1 User Manual
USER
MANUAL
Universal Dual Headphone
Bluetooth® Wireless Audio Transmier
Model: AF-T1 / AF-T1B
PACKAGE CONTENTS
EN
B
Universal Dual Headphone
Bluetooth® Wireless Audio Transmier
Bluetooth
Transmitter
Micro-USB
charging
cable
3.5mm
audio cable
TOSLINK
digital optical
S/PDIF audio
cable
3.5mm to
RCA adapter
Quick
start
guide
1
PRODUCT OVERVIEW
Universal Dual Headphone
Bluetooth® Wireless Audio Transmier
EN
1
2
3
1
Pairing button “B”
2
Indicator light “B”
3
Indicator light “A”
4
Pairing button “A”
5
On/Off switch
4 5
6
Analog audio input (3.5mm)
7
Digital audio input (TOSLINK
optical S/PDIF)
8
Power/charging indicator light
9
Micro-USB power/charging port
6
7
8
9
2
COMPATIBILITY
The
Connect
audio outputs:
The
supports the A2DP Bluetooth profile, such as a Bluetooth headphone,
Bluetooth speaker, or dedicated A2DP receiver.
is compatible with any device that has one of the following
1. 3.5mm (1/8”)
headphone
jack
2. RCA audio
jacks (red
and white
connectors)
3. TOSLINK
digital optical
(S/PDIF)
connector
Connect
can stream music to any Bluetooth audio receiver that
The
Connect
efficient Bluetooth audio codecs capable of transmitting CD-quality
audio that also provide lower and much lower latency (smaller
delay), respectively, compared to regular Bluetooth audio (SBC).
Using the
Low Latency will provide the best possible audio quality and
minimize audio lag/latency.
also supports aptX® and aptX Low Latency, more
Connect
with a headphone that supports aptX or aptX
B
3
CHARGING
To charge the
any powered USB port** and the charging port on the rear of the unit.
Charge time is approximately 90 minutes. The green charging indicator light
will pulse slowly while the
Note: If you use the
necessary to charge the unit before using it, or to turn it off after each use.
When used while plugged in, the
internal battery will be charged. When unplugged from USB power, the
Connect
LED will blink once every second and a short alert tone will sound at 10
minute intervals.
**The USB outputs of some TVs do not provide a stable current.
It is recommended to use a computer or USB wall charger to charge the
Connect
Connect
, plug the included Micro-USB charging cable into
Connect
is charging.
Connect
while plugged in to USB power, it is not
Connect
will use USB power and the
will use the internal battery. When battery is low, the green power
.
To turn on, slide the on/off switch on the right side of the
“On” position.
To turn off, slide the switch to the “off” position.
Connect
unit to the
4
SETUP:
CONNECTING TO TV OR OTHER AUDIO DEVICE
The
Connect
for your television or other device to find the appropriate connector to use for
audio output (Audio Out).
Option 1: Digital optical audio out (TOSLINK)
Newer TVs are usually outfitted with a TOSLINK
digital optical (SPDIF) connector.
A. Remove the protective
B. Plug the cable firmly into the optical audio output on the TV and the
The volume of optical output is typically fixed and TV speakers can be
controlled independently as necessary.
includes three connection options. Consult the user manual
caps from the included
fiber optic TOSLINK cable
optical input of the
Connect
.
continue to next page
5
Loading...