USER MANUAL
HD WIRELESS SOUND FOR YOUR HDTV
universal dual bluetooth
wireless audio transmitter
For Headphones and Speakers
Model: AF-S1
QUESTIONS?
WE’RE HERE TO HELP!
Phone Support: 626-965-1008 x31
Monday ~ Friday 9am to 5:30pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days
PACKAGE CONTENTS
Bluetooth
Transmitter
Micro-USB
power
cable
3.5mm
audio
cable
3.5mm to
RCA
adapter
LED INDICATOR LIGHTS
The status of the DUALSTREAM is shown by a green power /
charging indicator light on the rear of the unit and two blue
indicator lights on the top as follows:
INDICATOR LIGHT (S)
Green power indicator light on
Green power indicator light off
Blue light blinking
One solid blue light
Two solid blue lights
DEVICE STATUS
Powered on
Powered off or power
not connected
Pairing mode active
One Bluetooth
device is connected
Two Bluetooth
devices are connected
FACTORY RESET / CLEAR MEMORY
To perform a factory reset of the DUALSTREAM, hold pairing button “A”
for approximately 5 seconds until the blue indicator light stops blinking.
All previously paired devices will be cleared from memory and a new
pairing will need to be created by following the procedure in STEP .
2
SAFETY AND CARE
Clean with a soft, slightly damp cloth. Do not use chemical cleaners.
•
There are no user replaceable/repairable parts in this device.
•
Disassembling it will void your warranty.
Do not expose the device to liquids. If the device comes in contact
•
with liquids, quickly wipe away.
If submersed in water, do not turn the device on until completely dried.
Note: liquid submersion voids the warranty.
Do not use around flammable gases as fire or explosion may occur
•
WARNING
Using headphones at high to moderate volumes for extended periods of
time will result in permanent hearing damage. It is advised you keep
volume levels moderate to low at all times for your safety. Do not use
while driving a car, cycling, operating machinery, or performing other
activities that require hearing surrounding sounds.
Keep the device and packaging out of reach of children.
WARRANTY
MEE audio products purchased from authorized resellers are
covered by a 1-year manufacturer warranty.
Please retain a copy of your receipt as proof of purchase.
For more information, visit www.MEEaudio.com/Support
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
MEE audio is under license. Other trademarks and trade names are those of their respective owners.
Qualcomm® aptX™ is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm
Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm
Technologies International, Ltd., registered in the United States and other countries, used with permission.
1
PLUG IN USB POWER CABLE
POWER ON TRANSMITTER
A OFF ON A OFF ON
Plug into AC
adapter, TV,
or computer
USB port
A
OFF
ON
5
ADJUSTING HEADPHONE VOLUME
Volume can
be individually
adjusted on each
headphone or
speaker paired with
DUALSTREAM
the
.
WHEN FINISHED, POWER OFF HEADPHONES UNTIL NEXT USE
SUBSEQUENT USE
To reconnect a previously paired headphone or speaker, power
on the
DUALSTREAM first (if powered off) and then power on the
headphone or speaker. A solid blue light on the DUALSTREAM
will indicate that a connection has been established. It may take
up to 60 seconds for audio transmission to begin.
3
PAIR A 2ND HEADPHONE
OR SPEAKER (OPTIONAL)
A second Bluetooth audio
device can be paired after
one is already connected.
To pair the second device, put it in
pairing mode*, then tap pairing button
“B” on the
DUALSTREAM
.
TAP
and your
Once the
B
DUALSTREAM
device are both in pairing mode
simultaneously and within 3 ft (1m) of
each other, they will be paired.
PAIRING: LIGHT BLINKS
B
CONNECTED: SOLID LIGHT
B
A B
*CONSULT THE USER MANUAL OF YOUR DEVICE IF YOU
ARE NOT SURE HOW TO PUT IT IN PAIRING MODE
NOTE: SOUND MAY BE QUIET OR INTERMITTENT WHILE
PAIRING IS IN PROGRESS.
4. choose an audio cable supported by your tv
RCA
A
OFF
ON
AUDIO OUTPUT
Connect the
stereo cable to RCA
adapter and plug
into TV’s red/white
RCA jacks labeled
“AUDIO OUT”
IF TV AUDIO PLAYS FROM HEADPHONE,
SETUP IS COMPLETE. PROCEED TO STEP 5.
NO SOUND? CHECK TV SETTINGS MENU.
AUDIO OUPUT
R L
†
OPTICAL
R L
settings
Select “Variable”
in the audio
output settings
menu of your TV
sound / audio
Analog audio out
fixed
variable
settings
Set TV’s internal
speakers to
“OFF”
PROCEED TO STEP 5
†
EXACT MENU AND ITEM NAMES MAY VARY BETWEEN TVS
sound / audio
tv speakers
on
off
4. choose an audio cable supported by your tv
3.5MM [HEADPHONE JACK]
Maximize the
volume on
your TV
Plug the stereo
cable into TV’s
headphone jack
A
OFF
ON
Volume max vol+
AUDIO
Headphone jack may
be located on front,
side, or rear of TV
2
PAIR A BLUETOOTH
HEADPHONE OR SPEAKER
Put your headphone or
speaker in pairing mode*
Tap pairing button “A”
on the
DUALSTREAM
.
TAP
Once the
A OFF ON
DUALSTREAM
and your
device are both in pairing mode
simultaneously and within 3 ft (1m) of
each other, they will be paired.
PAIRING: LIGHT BLINKS
B
CONNECTED: SOLID LIGHT
B
*CONSULT THE USER MANUAL OF YOUR DEVICE IF YOU
ARE NOT SURE HOW TO PUT IT IN PAIRING MODE
NOTE: SOUND MAY BE QUIET OR INTERMITTENT WHILE
PAIRING IS IN PROGRESS.
Loading...