MEE T1N1 User Manual

www.MEEaudio.com/T1N1

Bluetooth® Wireless

headphone system for tv

Includes Bluetooth Wireless audio Transmitter
and Wireless Neckband In-Ear Headphones

Visit

MEEaudio.com/ConnectHelp

for
easy-to-follow setup videos, full user manuals,
and the latest troubleshooting information.

CONNECT SUPPORT GUIDE

USER MANUAL

Bluetooth® Wireless

headphone system for tv

FOR ADDITIONAL SUPPORT

View and download complete user manuals for
Connect transmitter and N1 headphones at

MEEaudio.com/Support

View our Connect Support Guide at
MEEaudio.com/ConnectHelp for easy-to-follow
setup videos and troubleshooting information

Contact us at [e-mail]

•

•

•

PACKAGE CONTENTS

CONNECT

Bluetooth Transmitter

TOSLINK digital optical

S/PDIF audio cable

3.5mm to RCA
adapter

3.5mm audio cable

2 x Micro-USB

charging cable

3 pairs of eartips

N1 Bluetooth

Stereo Headphones

1

CONNECT

2

hrs

CHARGE HEADPHONES

PLUG USB POWER CABLE INTO TRANSMITTER

plug into AC
adapter, TV,
or computer
USB port

N1

A OFF ON A OFF ON

2

POWER ON TRANSMITTER

POWER ON HEADPHONES

3

seconds

HOLD

A

OFF

ON

B

3

CONNECTION IS ESTABLISHED

solid blue light on transmitter

indicates connection

IF NO SOLID BLUE LIGHT, PERFORM PAIRING

PROCEDURE IN STEP 6

†

EXACT MENU AND ITEM NAMES MAY VARY BETWEEN TVS

4. choose an audio cable supported
by your tv

OPTICAL S/PDIF [DIGITAL]

A

OFF

ON

settings

Sound / Audio

digital Audio Output

auto
dolby digital

pcm / stereo

DTS

AUDIO OUPUT

R L

OPTICAL

IF TV AUDIO PLAYS FROM HEADPHONE,

SETUP IS COMPLETE. PROCEED TO STEP 5.

NO SOUND? CHECK TV SETTINGS MENU.

†

PROCEED TO STEP 5

remove
protective caps

select “PCM / Stereo” in the audio

output settings menu* of your TV

*

if sound is still not audible, select “PCM / Stereo” in the audio output

settings menu(s) of your video streaming app(s) and/or device(s)

AUDIO OUPUT

OPTICAL

plug the
optical cable
into TV’s digital
audio output

RCA

PROCEED TO STEP 5

set TV’s internal speakers to “OFF”

select “Variable” in the audio output

settings menu of your TV

A

OFF

ON

AUDIO OUPUT

R L

OPTICAL

IF TV AUDIO PLAYS FROM HEADPHONE,

SETUP IS COMPLETE. PROCEED TO STEP 5.

NO SOUND? CHECK TV SETTINGS MENU.

†

AUDIO OUTPUT

R L

plug the stereo
cable into RCA

adapter and

connect to TV’s

red/white RCA

jacks labeled
“AUDIO OUT”

settings

sound / audio

Analog audio out

fixed

variable

settings

sound / audio

tv speakers

on

off

†

EXACT MENU AND ITEM NAMES MAY VARY BETWEEN TVS

4. choose an audio cable supported
by your tv

4. choose an audio cable supported
by your tv

3.5MM [HEADPHONE JACK]

Volume max vol+

A

OFF

ON

plug the stereo
cable into TV’s
headphone
jack

headphone

jack may be

located on

front, side, or

rear of TV

AUDIO

maximize the volume on your TV

5

ADJUSTING HEADPHONE VOLUME

WHEN FINISHED, POWER OFF

HEADPHONES UNTIL NEXT USE

HOLD

POWER OFF HEADPHONES

TAP

to increase
volume

TAP

to decrease
volume

3

seconds

ADDITIONAL INFORMATION

6

PRODUCT OVERVIEW

N1

Micro-USB

charging

port

Volume up /

skip track

button

Volume down /

previous track

button

Multifunction

button

Status

indicator

light

ADDITIONAL INFORMATION

6

STEP 1: SELECTING EARTIPS

Select the eartips with the best
sound and comfort for your ears.

If your music sounds tinny or
lacks bass, try different eartips.

ADDITIONAL INFORMATION

6

Wear neckband so that controls are facing upwards
and place each earpiece in the corresponding ear.

STEP 2: WEARING THE N1

Note: liquid submersion voids the warranty.

Do not use around flammable gasses as fire or explosion
may occur.

•

ADDITIONAL INFORMATION

6

Adjust each earpiece until it fits flush in
your ear and the eartip seals the ear canal.

STEP 2: WEARING THE N1 (CONTINUED)

ADDITIONAL INFORMATION

6

STEP 2: WEARING THE N1 (CONTINUED)

When not in use,
clip earphones
together using
built-in magnets.

STEP 3. PAIRING WITH OTHER DEVICES

ADDITIONAL INFORMATION

6

Press and hold the
Multifunction button for about
7 seconds until you hear the
headset say “Pairing” and the
light flashes red and blue.

The N1 can be used as a headset when connected to
phones and tablets. It will first need to be paired with
each device by following the procedure below:

ADDITIONAL INFORMATION

6

STEP 3. PAIRING WITH OTHER DEVICES (CONTINUED)

Open the Bluetooth menu on the device you wish to pair
(usually located in Settings > Bluetooth). If needed, select
“search for devices”, “add new device”, or “refresh”.

AT&T LTE

12:26 PM

95%

Bluetooth

Settings

Searching...

Bluetooth

Devices

STEP 3. PAIRING WITH OTHER DEVICES (CONTINUED)

ADDITIONAL INFORMATION

6

AT&T LTE

12:26 PM

95%

Bluetooth

Settings

MEE audio N1

Bluetooth

Select “MEE audio N1” and allow pairing to complete.
Use “0000” if a pin is required.

Visit the Bluetooth Support Page at
MEEaudio.com/Bluetooth for additional Bluetooth pairing
and setup information.

Note: Once paired, N1 will automatically reconnect to the
paired device each time it is powered on. To pair a new
device, first turn off Bluetooth on any devices nearby that
have previously been paired with the N1.

CONTROLS WITH PHONES AND TABLETS

ADDITIONAL INFORMATION

6

Volume Down / Previous Track button

- Decrease Volume

- Previous Track

- Mute / Unmute Microphone
(during phone call)

Volume Up / Skip Track button

[TAP]

[HOLD 2 sec]

- Increase Volume

- Next Track

Multifunction button

[HOLD 3 sec]

[TAP]

[TAP]

[HOLD 2 sec]

[DOUBLE TAP]

[HOLD 2 sec]
[HOLD 3 sec]

- Power On

- Play / Pause (during media playback*)

- Answer Incoming Call / End Call

- Reject Incoming Call

- Redial**

- Activate Siri

®

/ Voice Command**

- Power Off

[TAP]
[HOLD 2 sec]
[HOLD 2 sec]

You may need to bring
your music player
application up on the
screen for media
playback to start

Not all devices support
this functionality

*

**

ADDITIONAL INFORMATION

6

PAIRING A HEADPHONE

This procedure is used to pair an additional headphone
or speaker with the Connect, or to re-pair the N1.

Make sure your Bluetooth headphone or speaker is
turned off. Put it in pairing mode. Consult the user
manual of the headphone or speaker if you are not sure
how to enter pairing mode.

Once the headphone or speaker is in pairing mode,
click pairing button “A” located on the side of the
Connect (use pairing button “B” when pairing a second
headphone or speaker). A blue light will blink rapidly on
the top of the unit to indicate that the Connect is ready
to pair. Once paired, the light will turn solid blue.

FACTORY RESET/CLEAR MEMORY

The Connect can be reset by holding pairing button “A”
for approximately 5 seconds, until the blue indicator
light stops blinking. All previously paired devices will be
cleared from memory and a new pairing will need to be
created by following the procedure in the previous step.

Battery performance will be severely decreased when stored
in extreme temperatures: below -10°C/14°F or above
45°C/113°F including direct sunlight.

The lifetime of the battery will be significantly reduced if your
device is not charged for a long time. It is recommended to
charge your device at least once a month.

Clean with a soft, slightly damp cloth. Do not use chemical
cleaners.

There are no user replaceable/reparable parts in this device.
Disassembling it will void your warranty.

Do not expose the device to liquids. If the device comes in
contact with liquids, quickly wipe away.
If submersed in water, do not turn the device on until
completely dried.
Note: liquid submersion voids the warranty.

Do not use around flammable gasses as fire or explosion
may occur.

•

•

•

•

•

•

SAFETY AND CARE

WARRANTY

MEE audio products purchased from authorized resellers

are covered by a 1-year manufacturer warranty.

For more information, visit www.MEEaudio.com/Support

MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.

Siri® is a registered trademarks of Apple Inc.
The Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by MEE audio is under license. Other trademarks
and trade names are those of their respective owners.

WARNING

Using headphones at high to moderate volumes for extended periods of time

will result in permanent hearing damage. It is advised you keep volume levels

moderate to low at all times for your safety. Do not use while driving a car,

cycling, operating machinery, or performing other activities that require

hearing surrounding sounds.

Keep the device and packaging out of reach of children.

QUESTIONS?

WE’RE HERE TO HELP!

Phone Support: 626-965-1008 x31

Monday ~ Friday 9am to 5:30pm PST

Email Support: [e-mail]

All emails are responded to within 2 business days