
Disassembly/Assembly M708348B225 Rev. B
M708348B225E Rev. B
Instructions for
MULTI AXIAL SCREW DRIVER
2014-01-21
Medtronic Sofamor Danek USA, Inc.
1800 Pyramid Place
Memphis, TN 38132
Telephone 800 933 2635 (In U.S.A.)
901 396 3133 (Outside U.S.A.)
Fax 901 396 0356
ENGLISH
IMPORTANT INFORMATION ON DISASSEMBLY/ASSEMBLY
, P/N 9010000814
INSTRUCTIONS FOR MULTI AXIAL SCREW DRIVER,
P/N 9010000814
DISASSEMBLY INSTRUCTIONS
Refer to the section entitled “Reprocessing – General Considerations” in the Medtronic Reusable
Instruments Instructions for Use prior to reprocessing this instrument. After the instrument is disassembled,
continue with step 3 in the section entitled “Manual Cleaning Instructions-Cleaning Instructions-Dedicated
Cleaning Area.”
Note: Reassemble the instrument after sterilization.
DISASSEMBLY
1. Separate the inner shaft from the outer shaft by turning the cap
counter-clockwise from the Multi Axial Screw Driver outer shaft sleeve.

Instructions for
MULTI AXIAL SCREW DRIVER
, P/N 9010000814
Medtronic Sofamor Danek USA, Inc.
1800 Pyramid Place
Memphis, TN 38132
Telephone 800 933 2635 (In U.S.A.)
901 396 3133 (Outside U.S.A.)
Fax 901 396 0356
ENGLISH
2014-01-21
DISASSEMBLY INSTRUCTIONS
Refer to the section entitled “Reprocessing – General Considerations” in the Medtronic Reusable
Instruments Instructions for Use prior to reprocessing this instrument. After the instrument is disassembled,
continue with step 3 in the section entitled “Manual Cleaning Instructions-Cleaning Instructions-Dedicated
Cleaning Area.”
Note: Reassemble the instrument after sterilization.
DISASSEMBLY
1. Separate the inner shaft from the outer shaft by turning the cap
counter-clockwise from the Multi Axial Screw Driver outer shaft sleeve.
IMPORTANT INFORMATION ON DISASSEMBLY/ASSEMBLY
INSTRUCTIONS FOR MULTI AXIAL SCREW DRIVER,
P/N 9010000814
2. Pull the inner shaft out to remove.
ASSeMbly
1. Insert the inner shaft into the outer shaft.
2. Turn the cap clockwise onto the Multi Axial Screw Driver outer shaft sleeve.
©2014 MEDTRONIC SOFAMOR DANEK USA, Inc. All rights reserved.