Medtronic REVEAL LINQ User Manual

GET STARTED

WITH YOUR

REVEAL LINQ

TM

SYSTEM

Patient Setup Guide

THE

REVEAL LINQ
SYSTEM

Once you set up the MyCareLinkTM Monitor
at home, it will begin automatically collecting

data from your Reveal LINQ

TM

ICM and

making it available to your doctor.

Heart data is recorded
with the Reveal LINQ ICM.

You go to bed near your
MyCareLink Monitor.

Your data is shared with the
MyCareLink Monitor.

Your doctor can access
your data.

Your doctor will contact
you if necessary.

Patient Assistant

Reveal LINQ Insertable
Cardiac Monitor (ICM)

MyCareLink
Patient Monitor

Your Reveal LINQ System includes the Insertable Cardiac
Monitor (ICM), which records your heart rate continuously
and stores data for heart-related events; and the
MyCareLink Patient Monitor that wirelessly collects heart
data from your ICM and makes it available to your doctor.

The Patient Assistant is
an optional component,
provided by your doctor. If
you received one, use it to
manually mark symptoms
when they occur.

1

3

2

6

4

PLUG monitor into

standard power outlet
near your bed.

POSITION monitor so
you are always within

6.5 ft (2 m) when

sleeping, and point
it toward the foot of
the bed.

PLACE sticker from
this setup guide on
the hand-held reader.

LOOK for Medtronic
logo as monitor
powers up.

FOLLOW manual
transmission
steps on the next
page just once

*

for initial setup.

§

Sleep near this monitor

§

Don’t push any buttons
unless instructed

Questions? Visit:

MonitorYourHeart.com/
LINQhelp

REMEMBER

SETTING UP YOUR

MYCARELINK MONITOR

AT HOME

5

WAIT for cellular

signal bars and white
arrow to appear.

*

Note: If manual t ransmission steps were

completed at t he hospital, you don’ t need
to do it again . Your screen wi ll go dark and
you’re set for automati c transmissions.