Medtronic LNQ22 Quick Guide

Patient Assistant PA97000
Quick Reference Card

Carry the Patient Assistant with you at all times. Use the
Patient Assistant as instructed by your doctor, whenever you
experience symptoms. The Patient Assistant communicates with your
cardiac device to record heart-rhythm data for the time surrounding a
symptomatic event.

Patient Assistant diagram

Success light (green)

Searching light (blue)

Record Symptom button

Connector loop

Using the Patient Assistant

1. Press and release the button. The

Searching light will start ashing

blue.

2. Quickly move the Patient Assistant so that you are holding it at

against your chest, directly over your cardiac device. (Your cardiac

device may be in a different location than shown in this gure.)

3. When a symptom is successfully marked, the success tone will
sound and the Success light will illuminate green. These success
signals mean you have recorded an event in your cardiac device.

Warning: Seek medical attention immediately if you feel ill and
think you need to go to the hospital. In an emergency, call your
local emergency number.

Troubleshooting

If the success signals do not occur within 15 seconds, reposition the
Patient Assistant so that it is near your cardiac device but not directly
on top of it, and repeat steps 1-2.

If you are wearing bulky clothing, such as a jacket or heavy
sweatshirt, remove that item of clothing before repeating steps 1-2.

Note: For more information about using and troubleshooting the
Patient Assistant, see your Patient Assistant PA97000 patient manual.

© 2017 Medtronic
M974655A001 A
2017-08-17

*M974655A001*