Medtronic 9733469 Instructions for Use

9735731-G02

Rev. 1

2020-05

StealthStation™ S8 System
Quick Reference Guide

Description

This quick reference guide provides an overview of the StealthStation™ S8 system.
For detailed system information, including all warnings and precautions, refer to the
system manual (9735573). For specific software instructions, refer to the software’s
instructions for use.

System carts

StealthStation™ S8 System Quick Reference Guide

Main cart monitor 8 Docking release lever

1

Camera lift arm 9

2

Camera 0 Front storage bin

3

Camera lower arm -

4

Camera cart monitor = Caster locks

5

Work surface q Cord wraps

6

Storage drawer w Main cart lower arm

7

Work surface that slides into a
horizontal position

Main cart CD/DVD drive and keyboard
storage

Setting up and starting the system

Separating the carts (optional)

Make sure that the system is on a level surface before attempting to separate the
carts.

1. Disconnect and store any loose cables.

2. While standing behind the camera cart, pull up on one or both of the docking
release levers located under the handle on both sides of the camera cart.

1:

1 Cart docking release lever

2 9735731-G02 Rev. 1

StealthStation™ S8 System Quick Reference Guide

3. Separate the carts with a gentle tug.

Positioning the main cart monitor

1. Grasp the sides of the monitor, and pull the monitor toward the front of the cart
to release it from its stowed state.

2. Move the monitor to the desired position.

Connecting and starting the system

1. If you are using the camera cart in addition to the main cart, connect the carts
with the cart-to-cart cable before you start the system.

Unwrap the cart-to-cart cable on the camera cart and connect it to the cart
cable connections located on the camera cart I/O panel and on the main cart
communication I/O panel.

2. Unwrap the power cord from the main cart and plug it into an electrical outlet.

When positioning the main cart, make sure to maintain easy access to the
power outlet in case it becomes necessary to unplug the system quickly.

3. Press and hold the LED power switch located on either the main cart deck or
the camera cart deck for one second.

When the carts are connected by the cart-to-cart cable, pressing the power
button on either cart powers up both carts. The system powers up and the login
screen displays when all system bootup diagnostics are complete.

Positioning the camera

1. Pull the camera handle away from the plastic clip to release the camera from
its stowed state.

2. Move the camera to the desired position.

Connecting either the optical or the EM hardware to the
main cart

For optical localization, connect the optical hardware

1. If you are using a wired (active) patient reference frame, connect it to port A on
the main cart localization I/O panel.

2. If you are using a microscope bracket or ultrasound tracker, connect the cable
to port B on the main cart localization I/O panel.

3. If you are using a wired (active) instrument, connect it to port C on the main
cart localization I/O panel.

4. Connect the footswitch to the footswitch port on the main cart I/O panel.

For electromagnetic localization, connect the EM hardware

1. Connect the EM instrument interface to the EM instrument interface port on the
main cart localization I/O panel.

9735731-G02 Rev. 1 3