6719
Pin-plug kit
Technical Manual
Caution: Federal law (USA) restricts this
device to sale by or on the order of a
physician.
The following list includes trademarks or registered trademarks of
Medtronic in the United States and possibly in other countries. All other
trademarks are the property of their respective owners.
Medtronic
Description/intended use
The Medtronic Model 6719 pin-plug kit contains two
(2) silicone pin plugs for use with a Medtronic device.
The pin plug is intended for use only in the unused
DF-11 port of the device (see Figure 1 for an example
of using the D-style connector).
Package contents
Dispose of all single-use accessories according to
local environmental requirements.
Each package contains the following items:
• 2 Model 6719 connector port pin plugs
• Product documentation
Contraindications
To date, there are no known contraindications to the
use of the 6719 pin-plug kit.
Warnings and precautions
Note: Medical procedure warnings and precautions
that pertain to the Medtronic implanted system are
provided in the manual that is packaged with the
device or on the Medtronic Manual Library website
(www.Medtronic.com/manuals).
External defibrillation equipment – Keep external
defibrillation equipment nearby for immediate use
during the implant procedure and whenever
arrhythmias are possible or intentionally induced.
1
DF-1 refers to the International Connector Standard (ISO
11318) whereby devices and leads so designated are
assured of a basic mechanical fit.
3
Product compatibility – This accessory has not
been tested for use with non-Medtronic products.
Inspecting the sterile package – Inspect the sterile
package with care before opening it.
• Contact a Medtronic representative if the seal or
package is damaged.
• Do not use the product after its expiration date.
Handling the pin plugs - – Connector port pin plugs
attract small particles such as dust and lint; therefore,
protect the pin plugs from materials shedding these
substances.
Sterilization – Medtronic has sterilized the package
contents with ethylene oxide before shipment. This
device is for single use only and is not intended to be
resterilized.
Instructions for use
To insert the pin plug into a device, follow these steps:
1. Insert the white handled torque wrench
(provided with the device) into the appropriate
setscrew.
2. Insert the pin plug into the appropriate port so
that the pin extends beyond the setscrews in the
connector block.
4
Figure 1. Inserting a pin plug into the HVX port of a D-style connector
1 HVX pin plug 3.2 mm (0.13 in)
3. Tighten the setscrew by turning the torque
wrench clockwise until it clicks one or more
times.
Caution: Do not use the pin plug in the HVB port
of the device.
For more information, consult the device technical
manual.
Medtronic disclaimer of warranty
For complete disclaimer of warranty information, see
the accompanying disclaimer of warranty document.
Service
Medtronic employs highly trained representatives
and engineers located throughout the world to serve
you and, upon request, to provide training to qualified
hospital personnel in the use of Medtronic products.
Medtronic also maintains a professional staff to
provide technical consultation to product users. For
more information, contact your local Medtronic
representative, or call or write Medtronic at the
appropriate telephone number or address listed on
the back cover.
5
CE mark of conformity
The following CE mark of conformity applies to the
Model 6719 pin-plug kit.
1994
Explanation of symbols
Table 1. Explanation of symbols on package
labeling
Refer to the package labels to see which symbols
apply to this product.
Conformité Européenne (European
Conformity). This symbol means
that the device fully complies with
applicable European Union acts.
For U.S. audiences only
Authorized representative in the
European community
Date of manufacture
Manufacturer
Use by
Lot number
Reorder number
6
Table 1. Explanation of symbols on package
labeling (continued)
Serial number
Sterilized using ethylene oxide
Do not reuse
Do not use if package is damaged
Upper limit of temperature
Open here
Consult instructions for use at this
website
Package contents
Product documentation
DF-1 pin plug
DF-1
Header shape
Implantable device
Use with
7
Medtronic, Inc.
*M971377A001*
710 Medtronic Parkway
Minneapolis, MN 55432
USA
www.medtronic.com
+1 763 514 4000
Authorized Representative
in the European Community
Medtronic B.V.
Earl Bakkenstraat 10
6422 PJ Heerlen
The Netherlands
+31 45 566 8000
Europe/Middle East/Africa
Medtronic International
Trading Sàrl
Route du Molliau 31
Case Postale 84
CH-1131 Tolochenaz
Switzerland
+41 21 802 7000
Australia
Medtronic Australasia Pty Ltd
5 Alma Road
Macquarie Park, NSW 2113
Australia
1800 668 670
Canada
Medtronic of Canada Ltd
99 Hereford Street
Brampton, Ontario L6Y 0R3
Canada
+1 905 460 3800
Technical manuals
www.medtronic.com/manuals
© 2017 Medtronic
M971377A001 A
2017-08-02
Loading...