Medison SA6000C User Manual

MEDISON CO., LTD. Product Management Dept.

X

SA6000C & MT COMPATIBILITY MATRI

REV

001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022

023
024
025

026
027
028
029
030
031
032
033
034
035
036
037
038

INITIAL RELEASE
DC NO : 00-all-134 S/W V3.01.02 RELEASE(2000.11.24)
The information of C3-7ED and DSC B/D corrected (2000.12.6)
DC NO : 01-all-007 CW revision-up (2001.02.24)
KDS PF type monitor(KD-1512PF) appllied(2001.5.30)
DC No : 01-all-084 40GB HDD applied (2001.12.04)
DC No : 01-ALL-116 3D option modified to a basic option (01.12.10)
DC No : 01-ALL-125 (MNT)chang item, IRF630(200V/9A) -> IRF640(200V/18A) (2002.01.09)
DC No : 02-ALL-009 Hard MAXTOR 20G application(2002.02.25)
DC No : 02-327-002 S/W 3.01.04 version-up. (2002.03.08)
DC No : 02-327-004 S/W 3.01.05 version-up. (2002.07.05)
DC No : 02-ALL-042 Lens Cover color change. (2002.09.30)
DC No : 02-327-008,(009) DSC,(OUT) revision-up (2002.11.01)
DC NO: 02-ALL-136 (02.11.23) HDD 60G appllied.
DC NO: 03-ALL-010 (03.03.10) KDS==> TOTOKU Monitor change.
DC NO: 03-327-004 (03.03.11) Image Noise Improvement.
DC NO: 03-327-005 (03.03.14) OUT B/D PCB Artwork Change.
DC NO: 03-327-007 (03.03.28) S/W:3.01.06 VER-UP, CDP B/D REV-UP.(03-327-008)
DC NO: 03-327-010(2003-08-19 ) POWER REV-UP.
DC NO:03-ALL-088 (2003-08-22 ) Maxtor HDD 60G sterilization.
DC NO:03-327-013(03.11.11) 3.01.07 Version Up.
DC NO:03-327-014(03.11.18) OUT BD revision-up.

DC NO:03-327-015(03.12.01) CDP BD revision-up.
DC NO:03-327-016(03.12.17) DSC BD revision-up.
DC NO:04-327-001(04.02.05) MOTHER BD revision-up.

DC NO:04-ALL-041(04.04.06) POWER revision-up.
DC NO:04-ALL-049(04.04.27) CW B/D revision.
DC NO:04-327-004(04.08.13) DSC B/D (5G) revision-up.
DC NO:04-327-006(04.09.17) DSC B/D (5H) revision-up.
DC NO:04-ALL-104(04.10.01) CW (1D), C-CW (1B) B/D revision-up.
DC NO:04-ALL-112(04.10.28) HDD-80G-MAXTOR sterilization.
DC NO:04-ALL-130(04.12.20) TOTOKU MONITOR Improvement.
DC NO:05-327-002(05.04.07) DSC B/D (5I) revision-up.
DC NO:05-ALL-049(05.07.08) BD-327-TX-2E REVISION.
DC NO:05-327-005(05.09.07) BD-327-TX-2F REVISION.
DC NO:05-327-006(05.10.11) AY-327-PWR-07 REVISION.
DC NO:05-ALL-089(05.11.02) AY-327-PWR-08 REVISION.
DC NO:06-ALL-027(06-04-06) MNT-15-TOTOKU/6000C-03 revision

DOCUMENT NUMBER

MSF-QA-801-CM6000C

REVISION STATUS

APPROVALS

Originator Manager
S.Y.YUN U.S.Shin

DISTRIBUTION STATEMENT

THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION WHICH IS PROPRIETARY TO MEDISON CO., LTD. NEITHER THE DOCUMENT NOR THE INFORMATION CONTAINED THEREIN SHOULD BE DISCLOSED OR
REPRODUCED IN WHOLE OR IN PART WITHOUT CONSENT OF MEDISON CO., LTD. AND IF DESIGN CHANGE OCCURS AFTER THE DATE OF LAST UPDATE, THIS DOCUMENT WILL BE EXPIRATION OF VALIDITY.

Last updated : 2006-05-02 1 / 11

How to use this document
Recommended to use and available
Applicable, but not recommended.

CM-6000C-038

MEDISON CO., LTD. Product Management Dept.

SA6000C & MT COMPATIBILITY MATRIX

COMPANY CONFIDENTIAL

OPTION

S/W VER.

Classifi

cation NAME PART NAME

Board BEAMFORMER BD-327-B/F 0A Initial release version

Board COLOR BD-327-C/D/P 0A Initial release version

DOPPLER 1A DC No : 99-6000C-005(99.02.02)
PROCESSOR Assembly and production problem

Board CW BD-327-CW-(N) 0A DC No : 00-6000C-005(00.05.08)

(static CW option) Initial release version for MT

C-CW APPLY 1A DC No : 00-6000C-012(00.07.01)

C-CW :1B APPLY 1D DC NO:04-ALL-104(04.10.01)

REV

HARDWARE COMMENTS

1A DC No : 99-6000C-007(99.01.28)

Debug problem due to PCB error

1B DC No : 99-6000C-020(99.04.23)

74HC574 vendor change due to block missing

1C DC No : 99-6000C-033(99.08.05)

Remove Horizontal noise

1D DC No : 99-6000C-046(99.09.14)

Pull up resister connect due to color noise

2A DC No : 99-6000C-047(99.09.09)

Apply change items of 1C & 1D to A/W

2C DC No : 05-ALL-013(05.02.16)

PCB enterprise alteration.

1B DC No : 99-6000C-017(99.03.29)

VRAM vendor change(samsung->OKI)

2A DC No : 00-6000C-005(00.05.08)

Initial release version for MT(MGA016)
For MT. Added new function

3A DC No : 00-6000C-012(00.07.01)

PCB A/W change due to Jumper line

3B DC No : 03-327-015(03.12.01)

RS-CF-2000J-B2 delett.

3C DC No : 03-327-008(03.04.21)

ICS-KM432S2030C E->F DIE Change. A33000864

Static CW & Sensing Voltage

PCB A/W change due to Jumper line

1B DC No : 01-all-A007(01.02.24)

ICS-EL7212CS & AD677KR(SMD type) applied

1C DC No :04-ALL-049(04.04.27)

ICD-LT1087CT - ICD-LT1084CT change.

TRS-S19410 -> TRS-SI9410BDY change.

Initial applied S/N of

System

3D

ECG

DICOM

Image Filing

Color mode

Doppler mode

Harmonic Img.

1.00.00

1.01.00

1.01.01

Only for the MT version

Only for the MT version

2.00.00

2.00.01

2.01.00

2.01.01

2.01.01A

2.01.01B

2.01.01C

2.02.00

2.02.01

2.03.00

2.03.01

2.03.01A

3.00.00

3.00.01

3.00.02

3.01.00

3.01.01

3.01.02

3.01.03

3.01.04

3.01.05

3.01.06

3.01.07

Last updated : 2006-05-02 2 / 11

CM-6000C-038

MEDISON CO., LTD. Product Management Dept.

COMPANY CONFIDENTIAL

OPTION S/W VER.

Classifi

cation NAME PART NAME

Board DSC BD-327C-DSC-(N) 0A Initial release version

(static CW option) 1A DC No : 99-6000C-010(99.02.02)

REV

HARDWARE & SOFTWARE COMMENTS

EMI related (add R,C) and image improvement

1B DC No : 99-6000C-017(99.03.29)

VRAM vendor change, Burn-in test problem

2A DC No : 99-6000C-018(99.03.29)

Increase Cine memory(32->64M)

2B DC No : 99-6000C-025(99.04.23)

White line noise during cine

2C DC No : 99-6000C-036(99.07.15)

MGA007A VENDOR change(LG->Hyundai)

2D DC No : 99-6000C-035(99.07.08)

Black dots in color box

2E DC No : 99-ALL-101(99.08.18)

MGA007A pin arrange

3A DC No : 99-6000C-040(99.08.18)

Delete jumper line including DC of 2B~2D

3B DC No : 01-327-001(01.07.09)

D/S/C 3PORT improvement.

4A DC No : 00-6000C-005(00.05.08)

Initial release version for MT
Static CW & Sensing Voltage

5A DC No : 00-6000C-012(00.07.01)

PCB A/W change due to Jumper line

5B DC No : 00-all-133(00.12.07)

Noise occurs in low temperature

5C DC No : 01-ALL-116(01.12.10)

64MB SDRAM installed basically (3D option)

5D DC No : 02-327-008(02.11.01)

Image Dot improvement . A2C001546

5E DC No : 03-327-004(03.03.11)

Image noise improvement . A2A001160

5F DC No : 03-327-016(03.12.17)

The low temperature Color Noise improvement

5G DC No :04-327-004 (04.08.13)

74HC245 -> 74F245 Change. (U101)

5H DC No : 04-327-006(04.09.17)

MEASURE CURSOR move image dot improvement

5I DC NO:05-327-002(05.04.07)

M MODE DOT improvement.

Initial applied S/N of

System

A49002135

3D

ECG

DICOM

Image Filing

Color mode

Doppler mode

Harmonic Img.

1.00.00

1.01.00

1.01.01

2.00.00

2.00.01

2.01.00

2.01.01

Only for the MT version

2.01.01A

2.01.01B

2.01.01C

2.02.00

2.02.01

2.03.00

2.03.01

2.03.01A

3.00.00

3.00.01

3.00.02

3.01.00

3.01.01

3.01.02

3.01.03

3.01.04

3.01.05

3.01.06

3.01.07

Last updated : 2006-05-02 3 / 11

CM-6000C-038

MEDISON CO., LTD. Product Management Dept.

COMPANY CONFIDENTIAL

Classifi

cation NAME PART NAME

Board ECHO BD-327-E/P 3A initial release (Using SA8800 B/D)

PROCESSOR (322-01-005- ) 3B DC No : 99-ALL-097(99.08.12)

BD-327-E/P-N 0A DC No : 00-6000C-005(00.05.08)
(327-01-021) Initial release version for MT

Board KEY BD327-KEY/I 0A Initial release version

INTERFACE 0B DC No : 99-6000C-043(99.09.17)

REV

HARDWARE COMMENTS

MGA007A VENDOR change(LG->Hyundai)

3C DC No : 99-ALL-101(99.08.18)

MGA007A pin arrange

3D DC No : 00-ALL-009(00.02.09)

Flash noise during Burn-in test

Static CW & Sensing Voltage

0B DC No: 00-6000C-017(00.08.29)

E/P의 MAIN CLOCK change.

1A DC No : 00-6000C-012(00.07.01)

PCB A/W change due to Jumper line

2A DC No :01-ALL-119(01.12.17)

PCB Artwork Change

Remove possible malfunction(handshaking)

0C DC No : 99-6000C-056(99.10.29)

New function -> 3D, DICOM(overlay change)

Initial applied S/N of

System

OPTION S/W VER.

3D

ECG

DICOM

Image Filing

Color mode

Doppler mode

Harmonic Img.

1.00.00

1.01.00

1.01.01

2.00.00

2.00.01

2.01.00

2.01.01

2.01.01A

Only for the MT version

2.01.01B

2.01.01C

2.02.00

2.02.01

2.03.00

2.03.01

2.03.01A

3.00.00

3.00.01

3.00.02

3.01.00

3.01.01

3.01.02

3.01.03

3.01.04

3.01.05

3.01.06

3.01.07

Board KEY BD327-KEY/M 0A Initial release version

MATRIX 1A DC No : 99-6000C-008(99.01.28)

Stabilize and improve productibity

Board MOTHER BD-327-MOTHER-N 0A Initial release version

1A DC No : 99-6000C-001(99.01.21)

Remote function. Improve productibity

2A DC No : 99-6000C-049(99.09.16)

Add LAN function(DICOM)

3A DC No : 00-6000C-005(00.05.08)

Initial release version for MT
Change for I/F of CW, NEW CDP, E/P

4A DC No : 00-6000C-012(00.07.01)

PCB A/W change due to Jumper line

4B DC No : 04-327-001(04.02.05)

CND-MOLE-02MSIL, CND-SLOT-ISA98 delete.

Last updated : 2006-05-02 4 / 11

Only for the MT version

CM-6000C-038

MEDISON CO., LTD. Product Management Dept.

COMPANY CONFIDENTIAL

Classifi

cation NAME PART NAME

Board OUT BD-327-OUT-N 0A Initial release version

ONLY USING
FOR REV.A

ONLY USING
FOR REV.B

REV

HARDWARE COMMENTS

1A DC No : 99-6000C-011(00.02.02)

Screen hsaking during VCR play

1B DC No : 99-6000C-016(00.03.08)

lines on the right side of screen

1C DC No: 99-6000C-017(99.03.18)

VRAM Vendor (SAMSUNG ==> OKI)

2A DC No : 99-6000C-021(99.04.02)

Initial release version for REVISION B
Increase doppler sound and remove noise

2B DC No : 99-6000C-024(99.04.26)

doppler sound switched & S/V bug patched

2C DC No : 99-6000C-029(99.04.26)

Abnormal image thru interlace monitor output

2D DC No : 99-6000C-034(99.07.12)

Abnormal image thru interlace monitor output

2E DC No : 99-6000C-052(99.09.09)

Abnormal image thru interlace monitor output

3A DC No : 99-6000C-039(99.08.18)

A/W changed including DC of 2B~2C

3B DC No : 99-6000C-059(99.11.08)

Interlace monitor output problem during I/F

3C DC No : 99-ALL-161(99.12.14)

Logo shaking during booting

3D DC No : 01-ALL-053(01.09.05)

overlay noise improvement.

4A DC No : 00-6000C-005(00.05.08)

Initial release version for MT
To match output geometric

4B

DC No : 02-327-009(02.11.01)
Image color dot improvement.

5A DC No : 03-327-005(03.03.14)

EL4393,S3528B(sterilization) PCB Artwork Change.

6A DC No : 03-327-014(03.11.18)

R194-R201 Change.

Initial applied S/N of

System

OPTION S/W VER.

3D

ECG

DICOM

Image Filing

Color mode

Doppler mode

Harmonic Img.

1.00.00

1.01.00

1.01.01

2.00.00

2.00.01

2.01.00

2.01.01

2.01.01A

Only for the MT version

2.01.01B

2.01.01C

2.02.00

2.02.01

2.03.00

2.03.01

2.03.01A

3.00.00

3.00.01

3.00.02

3.01.00

3.01.01

3.01.02

3.01.03

3.01.04

3.01.05

3.01.06

3.01.07

Board P/S/A BD-327-P/S/A-(N) 0A Initial release version

(static CW option) 1A DC No : 00-6000C-005(00.05.08)

Initial release version for MT
Add 3 ports and CW connector

Last updated : 2006-05-02 5 / 11

Only for the MT version

CM-6000C-038

MEDISON CO., LTD. Product Management Dept.

COMPANY CONFIDENTIAL

Classifi

cation NAME PART NAME

Board REAR BD-327-Rear/ILO 3A DC No : 98-ALL-105(98.12.28)

INTERFACE Hole size change to fix the IL and IU
LOWER

Board REAR BD-327-Rear/IUP 4A DC No : 99-all-007(99.02.12)

INTERFACE For compatibility with SA6000C
UPPER

Board REAR BD-327-Rear/M 0A Initial release version

PANEL 1A DC No : 99-6000C-003(99.01.21)
MIDDLE Mass production for LPP

Board REAR BD-327-Rear/L 0A Initial release version

PANEL 1A DC No : 99-6000C-002(99.01.18)
LEFT B/W print remote problem

REV

HARDWARE & SOFTWARE COMMENTS

2A DC No : 99-6000C-049(99.09.16)

Add LAN function (DICOM function)

2A DC No : 99-6000C-049(99.09.16)

Add LAN function (DICOM function)

3A DC No : 00-ALL-122(00.11.09)

Moving connectors to backward by 1mm

Initial applied S/N of

System

3D

ECG

OPTION

DICOM

Image Filing

Color mode

Doppler mode

Harmonic Img.

1.00.00

1.01.00

1.01.01

2.00.00

2.00.01

2.01.00

2.01.01

2.01.01A

S/W VER.

2.01.01B

2.01.01C

2.02.00

2.02.01

2.03.00

2.03.01

2.03.01A

3.00.00

3.00.01

3.00.02

3.01.00

3.01.01

3.01.02

3.01.03

3.01.04

3.01.05

3.01.06

3.01.07

Board REAR BD-327-Rear/R 0A Initial release version

PANEL 1A DC No : 99-6000C-004(99.01.21)
RIGHT Screw hole location change

1B DC No : 99-6000C-041(99.08.18)

Print 1 blank page when turn on

2A DC No : 00-ALL-122(00.11.09)

Moving connectors to backward by 1mm

Last updated : 2006-05-02 6 / 11

CM-6000C-038

MEDISON CO., LTD. Product Management Dept.

COMPANY CONFIDENTIAL

Classifi

cation NAME PART NAME

Board RECEIVER BD-327-RX-N 0A Initial release version

Board TRACK BALL BD-316-T-Ball 0A Initial release version

Board TIME BD-327-TGC 0A Initial release version

GAIN 0B DC No:02-ALL-046(02.05.16)
CONTROL SLIDE VOLUME, TGC KNOB Change. A27001410

REV

HARDWARE & SOFTWARE COMMENTS

0B DC No : 99-ALL-048(99.04.23)

Change AD812 to HA5023

1A DC No : 99-6000C-037(99.07.12)

Change the PCI slot size (increase 1.5mm)

2A DC No : 00-6000C-005(00.05.08)

Initial release version for MT
To support 3 ports

1A DC No:02-ALL-097(02.09.14)

System Lock-up improvement. A35001684

Initial applied S/N of

System

OPTION S/W VER.

3D

ECG

DICOM

Image Filing

Color mode

Doppler mode

Harmonic Img.

1.00.00

1.01.00

1.01.01

2.00.00

2.00.01

2.01.00

2.01.01

2.01.01A

Only for the MT version

2.01.01B

2.01.01C

2.02.00

2.02.01

2.03.00

2.03.01

2.03.01A

3.00.00

3.00.01

3.00.02

3.01.00

3.01.01

3.01.02

3.01.03

3.01.04

3.01.05

3.01.06

3.01.07

Board TRANSMITER BD-327-TX 0A Initial release version

1A DC No : 99-6000C-006(99.01.21)

Screw hole location change

2A DC No : 99-6000C-037(99.07.12)

Change the PCI slot size (increase 1.5mm)

2B DC No : 99-6000C-060(99.11.10)

Image format broken to vertical direction

2C DC No : 99-6000C-005(99.05.08)

Initial release version for MT
To support 3 ports

2D DC No : 05-ALL-013(05.02.16)

PCB enterprise alteration.

2E DC NO:05-ALL-049(05.07.08)

ICS-MGA002P sterilization.

2F DC NO:05-327-005(05.09.07)

B-MODE image improvement.

Last updated : 2006-05-02 7 / 11

Only for the MT version

CM-6000C-038

MEDISON CO., LTD. Product Management Dept.

OPTION

S/W VER.

COMPANY CONFIDENTIAL

Classifi

cation NAME PART NAME

external

CPU CPU-133MHz 01 Initial release version

external

PC MOTHER PC/MOTH-6000C 01 Initial release version
BOARD DICOM is not available

6000C/LAN 04 DC No : 99-6000c-048(99.09.12)

external

Backup Iomega ZIP Initial release version
Media Limited to 100MB

Super Disk DC No : 99-6000C-031(99.06.10)

external

HARD HDD-2X3.2A-Q DC No : 98-all-081(98.11.11)
DISK Out of production
DRIVE HDD-CR4.3A-Q DC No : 99-all-069(99.05.17)

HDD-CR6.4A-Q DC No : 99-all-139(99.11.09)

HDD-LCT8.4A-Q DC No : 00-all-020(00.03.07)

HDD-40G-MAXTOR DC No : 01-all-084(01.10.24 )

HDD-20G-MAXTOR DC No : 02-ALL-009(02.01.17 )

HDD-60G-MAXTOR DC No : 02-ALL-136(02.11.23 )

HDD-80G-MAXTOR DC No : 03-ALL-088 (2003-08-22 )

HDD-80G-SEAGATE DC NO:04-ALL-112(04.10.28)

external

POWER AY-327-Power 01 DC No : No document

REV

HARDWARE & SOFTWARE COMMENTS

Apply LAN for DICOM (check Rear M, Rear L)

Apply backup device (120MB)

Out of production

Out of production

Out of production

Out of production (Sterilization)

Hard MAXTOR 20G apply. A27001405

Out of production(Sterilization) A33001574

HARD MAXTOR 80G apply. A41001897

HDD-80G-SEAGATE apply.

Internal voltage fail in production line

02 DC No : 99-6000C-023(99.04.15)

System down during EMI, EMC test

03 DC No : 99-all-103(99.08.12)

Possible to burn out the power

04 DC No : 00-6000C-010(00.06.13)

Improve heat sink and change LM317, DS1233

05 DC No : 03-327-010(2003-08-19 )

Power Brush improvement.

06 DC NO:04-ALL-041(04.04.06)

Over Voltage Protection improvement.

07 DC NO:05-327-006(05.10.11)

Diode Vendor alteration.

08 DC NO:05-ALL-089(05.11.02)

POWER Design improvement.

Initial applied S/N of

A1B001144

System

Last updated : 2006-05-02 8 / 11

3D

ECG

DICOM

Image Filing

Color mode

Doppler mode

Harmonic Img.

1.00.00

1.01.00

1.01.01

2.00.00

2.00.01

2.01.00

2.01.01

2.01.01A

2.01.01B

2.01.01C

2.02.00

2.02.01

2.03.00

2.03.01

2.03.01A

3.00.00

3.00.01

3.00.02

3.01.00

3.01.01

3.01.02

3.01.03

3.01.04

3.01.05

3.01.06

3.01.07

CM-6000C-038

MEDISON CO., LTD. Product Management Dept.

)

)

(

COMPANY CONFIDENTIAL

OPTION S/W VER.

Classifi

cation NAME Major change description

external

MONITOR MNT-15-KDS 00 DC No : 98-8800-046(98.05.07)

Out of production for SONY monitor

01 DC No : 99-all-012(99.02.04)

KDS model upgrade

02 DC No : 99-all-132(99.10.18)

No screen during VCR play

03 DC No : 99-all-153(99.11.26)

Discoloration of monitor case

04 DC No : 00-6000C-002(00.03.09)

MNT-15-MAC 00 DC No : 00-all-113(00.10.19)

MNT-15-PF/KDS 00 DC No : 01-all-023(01.05.30)

MNT-15-TOTOKU/6000C
CRT-15-TOTOKU

CRT-15-TOTOKU-01

CRT-15-TOTOKU-02

external

MODEM Initial release version

LINE PRINTER

Peripher
al

B/W PRINTER OPT-PRT-SONY

COLOR)

RGB
PRINTER

VCR

pc-modem-Y2S336

pc-modem-int56K
HP 890C series

HP PRINTER HP6122 print
SONY 890 MD
Mitubish P91E
Mitubish P91W

Mitubish M90U
Mitubish M90E

MITSUBISH CP700

Panasonic MD830

Spec change for Output BD sync (pixel clock)

KDS monitor supply problem

KDS PF type monitor(KD-1512PF)

01 DC No : 01-all-062(01.09.10)

MNT KD-1512P type No image

02 DC No : 01-ALL-125(01.12.20)

After changing item, IRF630(200V/9A) -->
IRF640(200V/18A), Customer should use.

00 DC No : 03-ALL-010(03.03.10)

KDS==> TOTOKU Monitor change. A33001574

01 DC NO : 04-ALL-130(04.12.20)

47 pf /50V condenser apply.

02 DC NO : 05-ALL-042(05.06.21)

MNT Bowl Mount Hole Crack improvement.

03 DC NO:06-ALL-027(06-04-06)

CRT & FBT alteration

33.6K bps
DC No : 99-all-070(99.05.17
56K bps (U.S Robotics)
OPT-PRT-CP870H(HP870
OPT-PRT-CP895H(HP895cxi)

OPT-PRT-P91E
OPT-PRT-P91W

OPT-PRT-MITS-1
OPT-PRT-MITS-2

OPT-PRT-CP700U

*

Initial applied S/N of

System

A13000826

A16000944

A27001422

3D

ECG

DICOM

Image Filing

Color mode

Doppler mode

Harmonic Img.

1.00.00

1.01.00

1.01.01

2.00.00

2.00.01

2.01.00

2.01.01

Monitor size need to be adusted

2.01.01A

2.01.01B

2.01.01C

2.02.00

2.02.01

2.03.00

2.03.01

Not compatible with KDS

2.03.01A

3.00.00

3.00.01

3.00.02

3.01.00

MODEM no use.

V3.01.03 ~

3.01.01

3.01.02

3.01.03

3.01.04

3.01.05

3.01.06

3.01.07

Foot switch foot-S/W 4800

Last updated : 2006-05-02 9 / 11

Default

CM-6000C-038

MEDISON CO., LTD. Product Management Dept.

COMPANY CONFIDENTIAL

Classifi

cation NAME BIOPSY KIT APPLICATION & VENDOR&COMMENTS MT or CV

Probe

L5-9 BPL-75/40-AC
PB-L5-9EC ACUSON

HL5-9
PB-HL5-9ED

L5-9/60 BPL-50/65
PB-L5-9/60ED

L5-9ER BPL-L5-9ER Rev A, Rev B
PB-L5-9ER

LI5-9ED Rev A, Rev B
PB-LI5-9ED

LT5-9ED Rev A, Rev B
PB-LT5-9ED

HC3-6 BPC-HC35/40-01
PB-HC3-6ED

C3-7ER
PB-C3-7ER

C3-7ED
PB-C3-7ED

C4-7ED BPC-50
PB-50C4-7ED

MC2-5 BPC-HC35/40-01
PB-MC2-5ED

C2-4
PB-50C2-4CD

C2-4/30R
PB-C2-4/30ED

C2-4ES
PB-C2-4ES SOUND TECH

C4-9/10R Rev A, Rev B
PB-C4-9/10ED

ER4-9ES
PB-ER4-9ES
PB-ER4-9ES-N (04-ALL-034 / 04.03.23)

EC4-9/10ED
PB-EC4-9ED BP-KIT-008 MT
ET4-9/10R Rev A, Rev B
PB-ET4-9ED
CW2.0 Rev A, Rev B
PCW-20-FGG/3B) SOUND TECH
CW4.0 Rev A, Rev B

PCW-30-FGG/3B) VERMON

BP-KIT-006

BPC-C45/60-K

BP-C3-7IM

BPC-65-E/R

BP-KIT-002-01

General/Vascular/Extremity/GYN

General/Vascular/Extremity/GYN
PROSONIC

General/Vascular/Extremity/GYN
PROSONIC
General/Vascular/Extremity/GYN
PARALLEL DESIGN
General/Vascular/Extremity/GYN
PROSONIC
General/Vascular/Extremity/GYN
PROSONIC

General/Abdomen/OB/GYN/Renal/Fetal heart

PROSONIC
General/Abdomen/OB/GYN/Renal/Fetal Heart
PARALLEL DESIGN
General/Abdomen/OB/GYN/Renal/Fetal Heart
PROSONIC
02

DC No : 02-ALL-042(02.05.13)
Lens Cover color change. MT

General/Abdomen/OB/GYN/Renal/Pediatric

PROSONIC

General/Abdomen/OB/GYN/Renal/Fetal heart

PROSONIC
General/Cardiac

PROSONIC
General/Cardiac

PROSONIC
General/Cardiac

General/ Pediatric/ Vascular
PROSONIC

General/OB/GYN/Urology
SOUND TECH

General/OB/GYN/Urology
PROSONIC

General/OB/GYN/Urology
PROSONIC

Adult Cardiology/Ped Cardiology

Adult Cardiology/Ped Cardiology

Rev A, Rev B

MT

Rev A, Rev B

MT

Rev A, Rev B

MT

MT

MT

MT

Rev A, Rev B

MT

Rev A, Rev B

MT

Rev A, Rev B

MT

Rev A, Rev B

Rev A, Rev B

MT

Rev A, Rev B

MT

Rev A, Rev B

MT

Rev A, Rev B

MT

Rev A, Rev B

MT

MT

Rev A, Rev B

MT

Rev A, Rev B

MT

MT

MT

Last updated : 2006-05-02 10 / 11

3D

ECG

OPTION

DICOM

Image Filing

Color mode

Doppler mode

Harmonic

1.00.00

1.01.00

1.01.01

2.00.00

2.00.01

2.01.00

2.01.01

2.01.01A

S/W VER.

2.01.01B

2.01.01C

2.02.00

2.02.01

2.03.00

2.03.01

2.03.01A

3.00.00

Sterilization

3.00.01

3.00.02

3.01.00

3.01.01

3.01.02

3.01.03

3.01.04

3.01.05

3.01.06

3.01.07

CM-6000C-038

MEDISON CO., LTD. Product Management Dept.

OPTION

S/W VER.

COMPANY CONFIDENTIAL

Classifi

cation

S/W H/W Rev.A The OUT B/D revision (0A~2B)

S/W MAJOR SOFWARE FUNCTION VCR remote

S/W 1.00.00 (98.12.20) 6000C-D(E)10000

SOFTWARE

VERSION Major change description

VERSION-UP
ROADMAP

1.01.00 (99.02.22) D(E)10100

1.01.01 (99.02.24) D(E)10100

2.00.00 (99.04.27) D(E)20000

2.00.01 (99.05.06) D(E)20001

2.01.00 (99.08.26) D(E)20100

2.01.01 (99.10.01) D(E)20101

2.01.01A (99.10.04)

2.01.01B

2.01.01C

2.02.00 (99.12.06) D(E)20200

2.02.01 (99.12.29) D(E)20201

2.03.00 (00.01.31) D(E)20300

2.03.01 "

2.03.01A (00.03.16) "

3.00.00 (00.06.05) "

3.00.01 (00.06.29) 6000CMT-D(E)30001

3.00.02 (00.08.29) "

3.01.00 (00.11.10) D(E)30100

3.01.01 (00.11.13)

3.01.02 (00.11.24) "

3.01.03 (01.12.12 ) "

3.01.04(02.03.08) D(E)30104

3.01.05(02.07.05) D(E)30105

3.01.06(03.03.28) "

3.01.07(03.11.11) D(E)30107

H/W Rev.B (OLD) The OUT B/D revison (2A~3C)
MT (NEW) The OUT B/D revision (4A)

Email
Gynecology Measurement
Multi-Language
PW system
Japan version
Biopsy editor
Sweden GA Tabel
HP printer setup
SuperDisk
Expire Time

Initial Release version
PW system, Added 2 probes , Not recognize probe during booting
L5-9/60mm low Depth, Image format broken in BC mode

OB measurement, Auto freeze, Image filing compression, Zoom, Multi­language, Probe Disconnecting Detection, Gynecology Measurement

Volume calculation (using method ellipse) gives wrong result.
Image pattern broken when initial power on
System stability and for Japan version

Index problem (when starts measurement and save the result

Add 3D function(HW upgrade is required for 3D function)
Rotate X,Y,Z axis using angle, C gain, D gain knob

Add DICOM function(need to check H/W status)

ID comparing module bug patch.
Add Sweden GA Table, Improve Vascular doppler autotrace, Setting(config.ini)

is required after SW upgrade
Add C3-7ED probe

Abnormal color when change to color mode for C3-7ED 12cm depth
Add sinozuka GA, FW table and direction of bodymark, bodymark, setting for

animal(JAPAN domestic)
Image disappeared or image error in Multi-focus(B->M mode repeatedly)

Correcting 3D option problem and DSC control
Logo "SONOACE" added for German version
MANUAL (GA table, sonoview, DICOM) improvement.

modem delete.
CDP B/D REV-UP.
C4-9/10ED PROBE ID, HP PRINTER apply.

Initial applied S/N of

System

Manual Rev.

Option manual

(Japan)

"

3D

ECG

DICOM

Image Filing

Color mode

Doppler mode

Harmonic Img.

1.00.00

1.01.00

1.01.01

2.00.00

2.00.01

2.01.00

2.01.01

2.01.01A

2.01.01B

2.01.01C

2.02.00

2.02.01

version-up HDD or ghost file Skip available

Manual map

Not applicable due to 3D option problem

2.03.00

2.03.01

2.03.01A

3.00.00

3.00.01

3.00.02

3.01.00

3.01.01

3.01.02

3.01.03

3.01.04

3.01.05

3.01.06

3.01.07

Last updated : 2006-05-02 11 / 11

CM-6000C-038