Please read this section carefully and follow all the instructions
given. This will help ensure reliable operation and extend the service life for your appliance.
Keep the packaging and the user instructions for future reference
or inquiries at a later date. If you pass the article on to another
person, you must pass on these instructions.
•Never open up the housing of the appliance or the power
adapter. These contain no user-serviceable parts. If the
housing is opened there is a danger to life from electric
shock.
•Do not place any objects on the appliance and do not exert
any pressure on the display. Otherwise there is a danger
that the screen will break.
• Do not touch the display with sharp-edgedobjects, in
order to avoid damage. Use a blunt stylus. An operation
can be also carried out by means of a finger in many cases.
•There is a risk of injury if the display breaks. If this should
occur, use protective gloves to pack the broken parts and
contact customer support to arrange for disposal. Then
wash your hands with soap, since there is a possibility that
chemicals may have escaped.
•Never allow children to play with electrical equipment
unsupervised. Children may not always correctly recognize
possible danger.
Remove the power adapter (optional) from the outlet, switch the
appliance off immediately, or do not actually switch it on, and
contact Customer Service...
... if the optional power adapter or the plug becomes scorched or
damaged.
... if the housing of the appliance or the Power Pack becomes
damaged or fluids leak into it. Components must be checked
by Customer Service in order to avoid damage!
Data Security
•Every time you update your data make backup copies on
an external storage medium. The supplier does not assume
liability for data loss or damage to data storage units, and
no claims can be accepted for damages resulting from the
loss of data or for consequential damages.
Operating Environment
Failure to follow these instructions may lead to damage to your appliance. The guarantee will be excluded in such cases.
•Keep your navigation System and all connected devices
away from moisture and avoid dust, heat and direct sunlight, especially in the car.
•Make sure you protect your appliance from getting wet,
e.g. from rain and hail, at all times. Please pay attention
that moisture can even build up in a protective pouch because of condensation.
•Avoid heavy vibrations and shaking, such as can arise,
for example, in the case of transverse field intrusions.
•Avoid the device from releasing itself from its holder, for
example when braking. Install the device as vertically as
possible.
2
NGLISH
E
Repair
•Please contact our Service Center if you encounter tech-
nical problems with your appliance.
•In the event repair becomes necessary, please use only our
authorized Service Partners. You will find the address on
the back of your guarantee card.
Ambient temperature
•The appliance is most reliably operated at an ambient temperature of between 41°F and 104°F (5°C and 40°C) and
at a relative humidity of between 10% and 90% (noncondensing).
•In the powered down state the appliance can be stored at
between 32°F and 140°F (0°C and 60°C).
•Store the appliance in a safe location to avoid high temperatures (e.g. when parking or from direct sunlight).
AFETY AND MAINTENANCE
S
3
Electromagnetic Compatibility
•When connecting additional or other components the
“Electromagnetic Compatibility Directive” (EMC) must
be adhered to. Please also note that only screened cable
(maximum 10ft) should be used with this appliance.
•For optimal performance, maintain a distance of at least 10
ft. from sources of high-frequency and magnetic inter-ference (televisions, loudspeaker systems, mobile telephones and so on. This will help avoid malfunctions and loss
of data.
•Electronic devices emit electromagnetic waves during operation.
These emissions are harmless, but can interfere with other
devices operated in close proximity.
While our devices are tested and optimized for electromagnetic compliance in our laboratories, interference during
operation may still occur in the device itself and with other
devices in its proximity.
Should such interference occur, try to eliminate it by adjusting the positions of and the distances between the devices. Before driving a car, please ensure that the electronic systems of the car are working properly.
4
NGLISH
E
Connection
When connecting your appliance be sure to correctly observe the
following instructions:
Power through Car Adapter
•The car adapter should only be connected to the lighter socket of a car (car battery = DC 12V, truck battery = DC
24V !). If you are in any doubt about the power source in
your car, contact your car manufacturer.
Power supply through power adapter (optional)
•The outlet must be in the vicinity of the appliance and
must be easily accessible.
•Only use the mains adapter on grounded sockets at
100 – 240 V~ AC, 50/60 Hz. If you are unsure about the
power supply to the place of use, ask the relevant energy
supplier.
• Use only the original power adapter.
• For additional safety, we recommend the use of a surge
protector in order to protect your appliance from damage
from spikes or lightingstrikes on the power network.
Cabling
•Arrange cables so that no-one can tread on them or trip
over them.
•Do not place any items on the cable.
AFETY AND MAINTENANCE
S
5
Battery Operation
Your appliance is operated with a removable battery. In order to
prolong the life and efficiency of your battery and to ensure safe
operation, follow the instructions below:
!
Caution! Danger of explosion if rechargeable batter-
ies are not changed properly. Only replace with the
same type of battery or a similar type recommended
by the manufacturer. Never open the rechargeable
battery. Do not throw the rechargeable battery into
fire. Dispose of the used batteries following the
manufacturer's instructions.
•Batteries cannot withstand heat. Avoid the appliance and
the integrated battery becoming overheated. Failure to
comply with this instruction may lead to damage to and
even explosion of the battery.
•Use only the original power pack (optional) or the car
adapter to charge the battery.
6
•
The batteries are special category waste. When disposing of the appliance ensure that this is done correctly. Contact Customer Service for more details.
NGLISH
E
Maintenance
!
Warning: There are no user-serviceable or clean-
able parts inside the housing of the appliance.
You can prolong the life of the appliance by taking the following
simple steps:
•Always remove the power plug and all connecting ca-
bles before cleaning.
• Clean the appliance only with a damp, lint-free cloth.
• Do not use solvents, caustic or gaseous cleaners .
• The device and its packaging are recyclable.
Care of the Display
•Avoid scratching the display surface as this is easily
damaged. It is strongly recommended to use a display
protection mylar to avoid scratches. Please ask your
nearest dealer for this accessory.
The foil on the display at delivery is purely for protection
during transportation!
•Ensure that notraces of water remain on the screen.
Water can cause irreversible discoloration.
• Use only a soft, lint-free cloth to clean the screen.
• Do not expose the screen to either strong sunlight or
ultravioletradiation.
AFETY AND MAINTENANCE
S
7
Transport
If you wish to transport the appliance follow the instructions
below:
•Following transport of the appliance wait until the unit
has acclimatized before using it.
•In the case of wide fluctuations in temperature or
humidity condensation or moisture may form inside
the appliance and this can cause an electrical shortcircuit.
•In order to protect the appliance from dirt, knocks and
scratching, use either the protective case.
•Before travelling ensure that you are aware of the
power and communications provision at your destination. Before travelling obtain any power or communications adapters that may be needed.
•When shipping your appliance use only the original
packaging and advise the carrier accordingly.
•When passing through the hand luggage control at airports, it is recommended that you pass the appliance
and all magnetic storage media (external hard drives)
through the X-ray system (the machine on which you
place your bags). Avoid the magnetic detector (the
structure through which you yourself pass) or the magnetic wand (the hand device that the security staff use),
since this may corrupt your data.
8
NGLISH
E
Notes on these Operating Instructions
We have structured these Operating Instructions for the installation so that you will be able to look up the necessary subjectrelated information by means of the Contents List at any time.
i
Note: You will find comprehensive Operating Instruc-
tions for navigation on the relevant CD/DVD and at
the online help of the device.
Read the section "Frequently Asked Questions" to obtain answers
to questions that are often addressed to our customer service.
The purpose of this manual is to help you with installing your
appliance using instruction, that are easy to understand.
Quality
In selecting the components we have aimed for a high level of
functionality, simple handling, safety and reliability. A wellbalanced hardware and software design allows us to offer you a
technologically advanced navigation system that will give great
satisfaction in both work and leisure use.
Service
Our individual customer care is there to support you when you
have questions or problems. Please get in touch – we look forward
to helping you. This manual contains a special section on Customer Service starting on page 45.
AFETY AND MAINTENANCE
S
9
Supplied Items
Please check the integrity and completeness of the supplied items
and, in the case this is not complete, forward us any possible
claims within 14 days from the purchase date. The purchase package includes:
• Navigation system
• Power cable for cigarette lighter
(Atech ATPI-68HT0501)
• Pre-installed memory card MMC/SD
• TMC dipole antenna
• Support/navigation CD/DVD
• Instruction manual
Optional
• AC adaptor (Phihong PSC05R-050)
• USB-cable
• Car holder
• Bicycle fixture
• Earphones
• Protective case / storage pocket
10
NGLISH
E
Views
Front Components
n
o
p
Ref Component Description
q
n
Battery Charge
Indicator
o
Bluetooth
indicator
p
Touch Screen Displays the output of your appliance. Tap on
q
Microphone This microphone is intended for entering
The loading display will shine orange during
the charging process. It will shine green when
the accumulator is completely charged.
At the same time, the main switch (p. 13)
must be set to ON.
This LED flashes during Bluetooth activity.
the screen with your finger, a stylus or a
"blunt" tipped pen to select menu commands
or enter data.
speech for the handsfree facility.
IEWS
V
11
Back Components
GPS
aerial
n
o
Ref Component Description
n
Attachment
o
Stylus
p
External
aerial connection
Device for attaching the
navigation system to the car support
Take the pen out of its compartment in
order to use it, and replace it after use.
The pointer pen is required for operating
the touch screen.
Connection for an optional second aerial.
p
q
q
Loudspeaker
12
Plays back music, language statements and
warnings.
NGLISH
E
Bottom Components
Ref Component Description
Reset Opening
n
o
Mini-USBConnector
p
Main switch/
Battery button
n
o
Restarts your appliance. (Soft Reset,
see page 23).
Connection for connecting to a PC by means
of the USB cable (for data matching) as well
as connection to external power supply.
Separates the device from the battery
completely (also Hard Reset).
Top Components
p
GPS
aerial
Ref Component Description
n
SD/MMC Slot
The installed GPS aerial is located in the centre of the upper side
of the device.
Accepts an optional SD (Secure Digital) or
MMC (MultiMediaCard) card for removable
storage.
IEWS
V
n
13
Left Components
n
o
Ref Component Description
n
TMC antenna
connector
o
Earphones
Connector for a TMC dipole antenna.
Connects to a pair of stereo headphones
(3,5 mm).
14
NGLISH
E
Right Components
n
Ref Component Description
n
Hardware
buttons
* Some of the hardware buttons will only be operational after installation of the navigation software.
On-/Off button
Starts the Bluetooth application
Increases the volume
Reduces the volume
IEWS
V
15
Initial Set-up
The following guides you step by step through the initial set up of
the navigation system.
Firstly, remove the foil for protecting the device during transportation from the display.
I. Charging the battery
!
Attention: It can be necessary to recharge the bat-
tery for some time initially before it is possible to run
through the initial installation, according to the state
of charging of the battery installed.
Please pay attention to the following notes when handling the
battery:
•The charging status display lights orange until the naviga-
tion system is charged. Do not interrupt the charging process before the battery is fully charged. This may take a few
hours. The navigation system is fully charged if the charging
display lights green.
•Note: You can use the navigation system during the charg-
ing process, but the power supply must not be interrupted
during initial set-up.
•To fully charge the built-in battery, the external power
source (car adapter or optional power adapter) should remain continuously connected to the device.
•You can leave the main adapter connected, and this is very
handy for continuous operation. Please note, that both the
car adapter as well as the optional power adapter are consuming power, even when the battery of the navigation
system is not being charged.
•Information: It can take several minutes until the device
is ready to operate again, following the connection of the
external power supply, if the charging state of the battery
is very low.
16
NGLISH
E
Loading...
+ 44 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.