Medion PNA 510T user Manual

Contents
Safety and Maintenance .....................................................1
Safety Instructions............................................................. 1
Data Security.................................................................. 2
Operating Environment..................................................... 2
Repair............................................................................ 3
Ambient temperature .......................................................3
Electromagnetic Compatibility ...........................................4
Connection ....................................................................... 5
Battery Operation ............................................................ 6
Maintenance...................................................................... 7
Care of the Display............................................................. 7
Transport.......................................................................... 8
Notes on these Operating Instructions .................................. 9
Quality........................................................................... 9
Service ..........................................................................9
Supplied Items ................................................................ 10
Views ............................................................................... 11
Front Components ........................................................... 11
Back Components ............................................................ 12
Bottom Components......................................................... 13
Top Components.............................................................. 13
Left Components ............................................................. 14
Right Components ........................................................... 15
Initial Set-up....................................................................16
I. Charging the battery ..................................................... 16
Car Adapter .................................................................. 17
AC Adapter (optional)..................................................... 17
II. Switching on the navigation system ............................... 18
III. Installing the Navigation software ................................. 19
Operating .........................................................................20
Switching on/off the divice ................................................ 20
Working with Memory Cards.............................................. 21
Inserting Memory Cards ................................................. 21
Removing Memory Cards ................................................ 21
Accessing Memory Cards ................................................ 22
Data exchange via card reader ........................................ 22
Resetting the navigation system ........................................ 23
Soft Reset .................................................................... 23
Hard Reset ................................................................... 23
Navigation........................................................................ 24
Safety Instructions for Navigation ...................................... 24
Tips for Navigation......................................................... 24
Notes for Use in a Vehicle ............................................... 25
Additional Notes for Use on a Bicycle or a Motorcycle......... 25
Aerial Orientation............................................................. 26
Connecting the TMC dipole antenna .................................... 27
I. Mounting the car holder................................................. 28
II. Fixing the suction plate................................................. 29
III. Attach Navigation System............................................ 29
IV. Connecting the car adapter .......................................... 30
V. Starting the navigation software..................................... 31
MP3-Player....................................................................... 32
Main Screen Overview ...................................................... 32
Play list........................................................................ 34
FAQ .................................................................................. 35
Customer Service .............................................................36
First-Aid in the Event of Malfunction ................................... 36
General guidance........................................................... 36
Check Connections and Cables ........................................ 36
Faults and Possible Causes................................................ 37
Additional Support ........................................................... 38
ii
Appendix .......................................................................... 39
Synchronisation with the PC .............................................. 39
I. Installing Microsoft® ActiveSync®.................................. 39
II. Connecting with the PC .............................................. 40
III. Working with Microsoft® ActiveSync®.......................... 40
GPS (Global Positioning System) ........................................ 41
External GPS antenna .................................................... 42
TMC (Traffic Message Channel) .......................................... 43
Additional card material .................................................... 44
Transfer of card material to a memory card....................... 44
Mounting the Navigation Set on a Bicycle ............................ 45
Specifications...................................................................46
Warranty .......................................................................... 47
Liability limitations ........................................................... 48
Copying this manual......................................................... 48
Index ...............................................................................49
Device
At the end of its life, the appliance must not be disposed of in household rubbish. Enquire about the options for environmentally-friendly disposal
Batteries
Do not dispose of used batteries in the household rubbish! They must be deposited at a collection point for used batteries.
Copyright © 2006, All rights reserved. Microsoft trademarks of Microsoft Corporation in the U.S. and other countries. Pentium trademark of Intel Corporation. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Information in this document is subject to change without notice
®
, MS-DOS®, and Windows are registered
®
is a registered
iv
Safety and Maintenance
Safety Instructions
Please read this section carefully and follow all the instructions given. This will help ensure reliable operation and extend the ser­vice life for your appliance.
Keep the packaging and the user instructions for future reference or inquiries at a later date. If you pass the article on to another person, you must pass on these instructions.
Never open up the housing of the appliance or the power adapter. These contain no user-serviceable parts. If the housing is opened there is a danger to life from electric shock.
Do not place any objects on the appliance and do not exert any pressure on the display. Otherwise there is a danger that the screen will break.
Do not touch the display with sharp-edged objects, in order to avoid damage. Use a blunt stylus. An operation can be also carried out by means of a finger in many cases.
There is a risk of injury if the display breaks. If this should occur, use protective gloves to pack the broken parts and contact customer support to arrange for disposal. Then wash your hands with soap, since there is a possibility that chemicals may have escaped.
Never allow children to play with electrical equipment unsupervised. Children may not always correctly recognize possible danger.
AFETY AND MAINTENANCE
S
1
Remove the power adapter (optional) from the outlet, switch the appliance off immediately, or do not actually switch it on, and contact Customer Service...
... if the power adapter or the attached plug become scorched or
damaged.
... if the housing of the appliance or the Power Pack becomes
damaged or fluids leak into it. Components must be checked by Customer Service in order to avoid damage!
Data Security
Every time you update your data make backup copies on an external storage medium. The supplier does not assume liability for data loss or damage to data storage units, and no claims can be accepted for damages resulting from the loss of data or for consequential damages.
Operating Environment
Failure to follow these instructions may lead to damage to your ap­pliance. The guarantee will be excluded in such cases.
Keep your navigation System and all connected devices away from moisture and avoid dust, heat and direct sun­light, especially in the car.
Make sure you protect your appliance from getting wet, e.g. from rain and hail, at all times. Please pay attention that moisture can even build up in a protective pouch be­cause of condensation.
Avoid heavy vibrations and shaking, such as can arise, for example, in the case of transverse field intrusions.
Avoid the device from releasing itself from its holder, for example when braking. Install the device as vertically as possible.
2
NGLISH
E
Repair
Please contact our Service Center if you encounter techni­cal problems with your appliance.
In the event repair becomes necessary, please use only our authorized Service Partners. You will find the address on the back of your guarantee card.
Ambient temperature
The appliance is most reliably operated at an ambient tem­perature of between 41°F and 104°F (5°C and 40°C) and at a relative humidity of between 10% and 90% (non­condensing).
In the powered down state the appliance can be stored at between 32°F and 140°F (0°C and 60°C).
Store the appliance in a safe location to avoid high tem­peratures (e.g. when parking or from direct sunlight).
AFETY AND MAINTENANCE
S
3
Electromagnetic Compatibility
When connecting additional or other components the “Elec­tromagnetic Compatibility Directive” (EMC) must be ad­hered to. Please also note that only screened cable (maxi­mum 10ft) should be used with this appliance.
For optimal performance, maintain a distance of at least 10 ft. from sources of high-frequency and magnetic interfer­ence (televisions, loudspeaker systems, mobile telephones and so on. This will help avoid malfunctions and loss of data.
Electronic devices emit electromagnetic waves during op­eration. These emissions are harmless, but can interfere with other devices operated in close proximity. While our devices are tested and optimized for electromag­netic compliance in our laboratories, interference during operation may still occur in the device itself and with other devices in its proximity. Should such interference occur, try to eliminate it by ad­justing the positions of and the distances between the de­vices. Before driving a car, please ensure that the electronic sys­tems of the car are working properly.
4
NGLISH
E
Connection
When connecting your appliance be sure to correctly observe the following instructions:
Power through Car Adapter
The car adapter should only be connected to the lighter so­cket of a car (car battery = DC 12V , truck battery = DC 24V !). If you are in any doubt about the power source in your car, contact your car manufacturer.
Power supply
The outlet must be in the vicinity of the appliance and must be easily accessible.
Only use the mains adapter on grounded sockets at 100 – 240 V~ AC, 50/60 Hz. If you are unsure about the power supply to the place of use, ask the relevant energy supplier.
Use only the power adapter (optional) provided with your appliance.
For additional safety, we recommend the use of a surge protector in order to protect your appliance from damage from spikes or lighting strikes on the power network.
Cabling
Arrange cables so that no-one can tread on them or trip over them.
Do not place any items on the cable.
AFETY AND MAINTENANCE
S
5
Battery Operation
Your appliance is operated with a removable battery. In order to pro­long the life and efficiency of your battery and to ensure safe opera­tion, follow the instructions below:
!
Caution! Danger of explosion if rechargeable batter-
ies are not changed properly. Only replace with the same type of battery or a similar type recommended by the manufacturer. Never open the rechargeable battery. Do not throw the rechargeable battery into fire. Dispose of the used batteries following the manufacturer's instructions.
Batteries cannot withstand heat. Avoid the appliance and the integrated battery becoming overheated. Failure to comply with this instruction may lead to damage to and even explo­sion of the battery.
Use only the original power pack (optional) or the car adapter to charge the battery.
6
The batteries are special category waste. When dis­posing of the appliance ensure that this is done correctly. Contact Customer Service for more details.
NGLISH
E
Maintenance
!
Warning: There are no user-serviceable or clean-
able parts inside the housing of the appliance.
You can prolong the life of the appliance by taking the following simple steps:
Always remove the power plug and all connecting ca- bles before cleaning.
Clean the appliance only with a damp, lint-free cloth.
Do not use solvents, caustic or gaseous cleaners .
The device and its packaging are recyclable.
Care of the Display
Avoid scratching the display surface as this is easily dam­aged. It is strongly recommended to use a display protec­tion mylar to avoid scratches. Please ask your nearest dealer for this accessory. The foil on the display at delivery is purely for protection during transportation!
Ensure that no traces of water remain on the screen. Wa­ter can cause irreversible discoloration.
Use only a soft, lint-free cloth to clean the screen.
Do not expose the screen to either strong sunlight or ul-
traviolet radiation.
AFETY AND MAINTENANCE
S
7
Transport
If you wish to transport the appliance follow the instructions below:
Following transport of the appliance wait until the unit has acclimatized before using it.
In the case of wide fluctuations in temperature or humidity condensation or moisture may form inside the appliance and this can cause an electrical short-circuit.
In order to protect the appliance from dirt, knocks and scratching, use either the protective case.
Before travelling ensure that you are aware of the power and communications provision at your destination. Before travelling obtain any power or communications adapters (modem, LAN, etc.) that may be needed.
When shipping your appliance use only the original pack­aging and advise the carrier accordingly.
When passing through the hand luggage control at air­ports, it is recommended that you pass the appliance and all magnetic storage media (external hard drives) through the X-ray system (the machine on which you place your bags). Avoid the magnetic detector (the structure through which you yourself pass) or the magnetic wand (the hand device that the security staff use), since this may corrupt your data.
8
NGLISH
E
Notes on these Operating Instructions
We have structured these Operating Instructions for the installa­tion so that you will be able to look up the necessary subject­related information by means of the Contents List at any time.
i
Note: You will find comprehensive Operating Instruc-
tions for navigation on the relevant CDs/DVDs and at the online help of the device.
Read the section "Frequently Asked Questions" to obtain answers to questions that are often addressed to our customer service.
The purpose of this manual is to help you with installing your appliance using instruction, that are easy to understand.
Quality
In selecting the components we have aimed for a high level of functionality, simple handling, safety and reliability. A well­balanced hardware and software design allows us to offer you a technologically advanced navigation system that will give great satisfaction in both work and leisure use.
Service
Our individual customer care is there to support you when you have questions or problems. Please get in touch – we look forward to helping you. This manual contains a special section on Cus­tomer Service starting on page 36.
AFETY AND MAINTENANCE
S
9
Supplied Items
Please check the integrity and completeness of the supplied items and, in the case this is not complete, forward us any possible claims within 14 days from the purchase date. The purchase pa­ckage includes:
Navigation system
Pre-installed memory card MMC/SD
Power cable for cigarette lighter
(Atech ATPI-68HT0501)
Car holder
TMC dipole antenna
CDs/DVDs with navigation software
Support CD
Instruction manual and warranty card
Optional
AC adaptor (Phihong PSC05R-050)
USB-cable
Bicycle fixture
10
NGLISH
E
Views
Front Components
n
o
Ref Component Description
n
Battery Charge Indicator
Touch Screen Displays the output of your appliance. Tap on
o
The loading display will shine orange during the charging process. It will shine green when the accumulator is completely charged.
At the same time, the main switch (p. 13) must be set to ON.
the screen with your finger, a stylus or a "blunt" tipped pen to select menu commands or enter data.
IEWS
V
11
Back Components
GPS
aerial
n
o
Ref Component Description
n
Attachment
o
Stylus
p
External aerial connection
Device for attaching the navigation system to the car support
Take the pen out of its compartment in order to use it, and replace it after use. The pointer pen is required for operating the touch screen.
Connection for an optional second aerial.
p
q
q
Loudspeaker
12
Plays back music, language statements and warnings.
NGLISH
E
Bottom Components
Ref Component Description
Reset Opening
n
o
Mini-USB­Connector
p
Main switch/ Battery button
n
o
Restarts your appliance. (Soft Reset, see page 23).
Connection for connecting to a PC by means of the USB cable (for data matching) as well as connection to external power supply.
Separates the device from the battery completely (also Hard Reset).
Top Components
p
GPS
aerial
Ref Component Description
n
SD/MMC Slot
The installed GPS aerial is located in the centre of the upper side of the device.
Accepts an optional SD (Secure Digital) or MMC (MultiMediaCard) card for removable storage.
IEWS
V
n
13
Left Components
n
o
Ref Component Description
n
TMC antenna connector
o
Earphones
Connector for a TMC dipole antenna.
Connects to a pair of stereo headphones (3,5 mm).
14
NGLISH
E
Right Components
n
Ref Component Description
n
Hardware buttons
On-/Off button
Button Options / Destination
Increases the volume.
Reduces the volume.
* Some of the hardware buttons will only be operational after in­stallation of the navigation software.
IEWS
V
15
Initial Set-up
The following guides you step by step through the initial set up of the navigation system.
Firstly, remove the foil for protecting the device during transpor­tation from the display.
I. Charging the battery
!
Attention: It can be necessary to recharge the bat-
tery for some time initially before it is possible to run through the initial installation, according to the state of charging of the battery installed.
Please pay attention to the following notes when handling the battery:
The charging status display lights orange until the naviga­tion system is charged. Do not interrupt the charging proc­ess before the battery is fully charged. This may take a few hours. The navigation system is fully charged if the charging display lights green.
Note: You can use the navigation system during the charg- ing process, but the power supply must not be interrupted during initial set-up.
To fully charge the built-in battery, the external power source (car adapter or optional power adapter) should re­main continuously connected to the device.
You can leave the main adapter connected, and this is very handy for continuous operation. Please note, that both the car adapter as well as the optional power adapter are con­suming power, even when the battery of the navigation system is not being charged.
Information: It can take several minutes until the device is ready to operate again, following the connection of the external power supply, if the charging state of the battery is very low.
16
NGLISH
E
Car Adapter
AC Adapter (optional)
(similar picture)
Adaptor plug
(similar picture)
Push the adapter connector into the guide on the back of the AC
1.
adapter. Press the push button at the same time, so that the adapter plug can engage.
2. Push the AC adapter (o) into a power point that is easily accessi-
ble.
3. Push the cable of the AC adapter (n) into the AC adapter connec-
tion at the bottom of the navigation system.
NITIAL SET-UP
I
17
II. Switching on the navigation system
1. Switch the main switch at the bottom of the device to ON.
Attention: Always leave the main switch in the ON
!
Position, unless you want to carry out a new reinstal­lation. All data will be lost and the initial installation will have to be carried out again if the switch is set to OFF (see page 23).
The Navigation System will start the initial installation automati­cally. The brand logo will appear and your device will display the application screen after a few seconds. Follow the onscreen in­structions.
18
NGLISH
E
III. Installing the Navigation software
You will be requested to install the Navigation Software during the initial installation. Please proceed as follows:
1. Carefully take the memory card out of its packing. Take
care not to touch or dirty the contacts.
2. Push the memory card carefully into the SD-/MMC card bay
until it slightly lock in place.
3. Click OK to install the application.
The memory card must always be inserted in the device while the navigation system is being used. It will be necessary to carry out a Soft Reset to restart the navigation system if the memory card has been removed, only for a short time, while the system was being used (see page 23).
The main screen, through which you will be able to make the navigation settings, will appear after all the data has been copied to your navigation system.
Please also read the chapter Navigation starting on page 24.
NITIAL SET-UP
I
19
Operating
Switching on/off the divice
Your device will be in its normal operating state after the initial setting up. You will activate and deactivate your device with the On-/Off switch.
1. To start your navigation system press briefly the On-/Off
switch
i
Note: Your device will be delivered in a status in
which it will not switch off independently. You can adjust the period of operation to suit your needs using the Settings button on the main screen of your device.
2. To switch off your navigation system press briefly the On-
/Off switch
Your navigation system will consume a small amount of electricity and the installed battery will be discharged, even when the device is switched off.
It is possible for the battery to lose so much energy that an initial installation will be necessary once again, if you do not use the navigation system for a longer period.
.
.
20
NGLISH
E
Working with Memory Cards
Your navigation system supports MMC and SD memory cards.
Inserting Memory Cards
1. Carefully take the memory card out of its packing (if in­cluded). Take care not to touch or dirty the contacts.
2. Insert the memory card carefully into the card bay with contacts pointing forward. The printed side of the memory card must face upwards. The card must lock easily.
Removing Memory Cards
Note: Only remove the memory card if the naviga-
i
tion software has been closed and the device has been switched off by means of the On/Off button be­forehand. Otherwise you will risk a loss of data.
1. To remove the card press lightly onto the upper edge until it ejects.
2. Pull the card out without touching the contacts.
3. Store the memory card in the packing or in another safe location.
i
Note: Memory cards are very fragile. Take care not
to dirty the contacts and not to force the card.
PERATING
O
21
Accessing Memory Cards
The appliance only supports memory cards in the FAT16/32
file format. If you insert a card prepared with a different for­mat (e.g. in cameras, MP3 players), your navigation system may not recognize it and will ask you to format it again.
Warning: Formatting the memory card irretrievably
!
wipes out all data.
Likewise you cannot just copy files onto the memory card.
In some cases they must be converted by the Microsoft
ActiveSync
®
program.
®
Data exchange via card reader
However, if you wish to copy large quantities of data (MP3 files, navigation maps) to the memory card, these can also be stored directly to the memory card.
Many computers already have a card reader. Insert the card in this and copy the data directly to the card.
Because of the direct access you can achieve a much higher transfer rate compared to using ActiveSync
®
.
22
NGLISH
E
Resetting the navigation system
There are two options for resetting the navigation system.
Soft Reset
This option restarts the navigation system, without reinstallation being necessary. A soft-reset is often used in order to reorganize the memory. In doing so all programs that are running are inter­rupted and the working memory is reinitialized.
Choose this option if your navigation system is not responding or working properly.
Perform the soft-reset as follows: Press the tip of the stylus into the soft-reset switch opening
(see page 13)
or
insert a pointy object (e.g. a paper clip, which has been bent open) with slight pressure into the reset opening.
Hard Reset
!
Warning: A hard-reset deletes all data on your
appliance and causes a new initial installation.
It is not necessary to install the software on your synchronisation computer again, however.
Perform the hard-reset as follows:
1. Remove the external power source.
2. Push the On/Off switch (see page 13, p) at the bottom of the device on the back of the device first to the OFF posi­tion initially and back to ON after 2 seconds.
3. It will be necessary to carry out the software installation again after a Hard Reset.
PERATING
O
23
Navigation
Safety Instructions for Navigation
The bundled product CD/DVD contains a comprehensive instruction manual.
Tips for Navigation
Do not manipulate the navigation system while driving
to protect yourself and others from accidents!
In the event that you do not understand the voice instruc-
tion or if you are in any doubt about what to do at the next intersection, then the map or arrow display will provide you with a quick orientation. Only look at the display when you are in a safe driving situation!
!
Attention: The road layout and driving rules take
precedence over the instructions of the navigation system. Only follow the instructions when circum­stances and driving rules permit it! The navigation system will guide you to your destination even when you have to deviate from your planned route.
The direction statements of the navigation system given do
not release the driver of the vehicle from his or her duty of care or personal responsibility.
Plan routes before you leave. If you want to plan a new
route whilst on the road stop driving.
In order to receive the GPS signal correctly, metal objects
may not hinder reception. Attach the navigation system onto the inside of the windscreen or near the windscreen with the sucker. Try out different positions in your vehicle in order to find the best reception.
24
NGLISH
E
Notes for Use in a Vehicle
Take care that the holder does not present any risk to safe-
ty, even in the case of an accident, when installing it.
Take care that the cable does not impede any safety com-
ponents.
The display of your navigation system may show “light re-
flexions”. Please take care of not being “blinded” during operation.
Take care that the cable does not impede any safety com-
ponents.
Do not mount the components within the operating range
of any airbags.
Check the secure adherence of the suction cup at regular
intervals.
The power plug will consume power, even if no device is
connected. Remove it when not in use to avoid draining the battery.
Check all safety equipment in your car after installation.
Additional Notes for Use on a Bicycle or a Motorcycle
Pay attention during installation that the ability to steer is
not impaired.
Do not cover any instruments during installation.
AVIGATION
N
25
Aerial Orientation
The aerial must have unrestricted access to the sky to receive GPS satellite signals. Orient the aerial as horizontally as possible for this reason. Try out aerial and installation possibilities in the vehicle in the case of inadequate reception. It can be necessary to connect an external GPS antenna (see page 42) under certain circumstances.
aerial
GPS
26
NGLISH
E
Connecting the TMC dipole antenna
Your navigation device is equipped with a TMC receiver fort he purpose of receiving traffic information. However, a reception is only ensured if the supplied TMC dipole antenna is connected.
Insert the jack plug of the TMC dipole antenna in the TMC an­ntenna connector at the left side (see page 14) of your naviga­tion system.
Use the suckers to help fix the antenna (e.g. position them on the edge of your windscreen).
Your navigation system will now be able to receive traffic informa­tion through the TMC receiver and thus to avoid potential disrup­tions to traffic.
AVIGATION
N
27
I. Mounting the car holder
Attention! Only fix the holder for the navigation sys-
!
tem to the windscreen, if it does not impede the view. Should this not be possible, then mount the holder with the enclosed suction plate in any way that will allow peril-free and safe operation.
28
Suction plate
(optional)
Note: If you want to fix the holder to the wind
i
screen, then you can skip steps 1 and 2.
NGLISH
E
Snap-in lever
(similar picture)
1. Remove the protective foil from the sticky side of the suc­tion plate.
2. Fix the suction plate to a suitable location on the dashboard. Take care, that the surface of the dashboard is clean and press the suction plate strongly onto the surface.
Note: To obtain a strong and secure hold the suction
i
plate should not be used for 24 hours.
II. Fixing the suction plate
Note: Clean the disk thoroughly with a glass cleaner.
i
Warm the disk and the nipple slightly at tempera­tures below 15° C.
Place the holder with the suction head onto the suction plate (or directly onto the wind screen) and press the lever on the suction head downwards. The sucker will attach itself to the background firmly.
III. Attach Navigation System
1. Connect the car adapter (see page 17) and, if necessary, the external GPS aerial, to your navigation system and in­sert the memory card.
2. Position the support on the attachment holes on the back of the device.
3. After you have put the device on the support, push the navigation system downwards until it locks into place au­dibly.
4. Now you will be able to place the complete unit on the cleaned windscreen or the suction plate
AVIGATION
N
29
IV. Connecting the car adapter
(similar picture)
1. Plug the jack (n) of the connection cable into the corre­sponding receptor at the bottom of your navigation system (p. 13).
2. Insert the power adapter (o) now into the cigarette lighter socket and ensure, that it will not lose contact while driv­ing. This could cause a malfunction.
i
Note: Remove the power adapter from the cigarette
lighter socket when ending a trip or when parking the car for a extended period of time. Otherwise the car battery could be drained. In this case use the power
switch
to switch off the navigation system.
30
NGLISH
E
V. Starting the navigation software
i
Note: The memory card must always be inserted in
the device while the navigation system is being used. It will be necessary to carry out a Soft Reset to re­start the navigation system if the memory card has been removed, only for a short time, while the sys­tem was being used (see page 23). This Reset will take place automatically, according to the navigation system.
1. Switch on your navigation system.
2. The Navigation software will start automatically or after tapping on the navigation control button on the main screen, according to the version.
3. Tap on Navigation on the screen for entering the destina­tion and enter the address of your navigation destination.
Confirm your entry by clicking the navigation. You will receive the route information on the screen, augmented by language statements, after a short time, if the satellite reception is adequate.
Further information regarding the navigation software can be found in the comprehensive manual on your navigation CD(s)/DVD(s). This is a pdf-file you can read and print with the any Acrobat Reader.
9 symbol to start the
Note: The GPS-receiver will require some minutes
i
for initialization when deployed for the first time. Even when GPS signal reception is indicated the navigation could be imprecise. In all future instances it will take about 30-60 seconds until a correct GPS­signal is available, sufficient “sight” of the satellite is a prerequisite.
AVIGATION
N
31
MP3-Player
Your navigation system is also equipped with an MP3 player.
1. Click on the button on the main screen to start the MP3 player.
2. All MP3 files in the system, including those on a memory card, are automatically listed in the play list and are avail­able for playback.
Main Screen Overview
32
NGLISH
E
Button Name Description
or
or
or
Play/ Pause
Stop Stop the playback.
Previous/ Next
Volume Increase or decrease the volume.
Playback Mode
Play or pause the playback.
Move to the previous or next file.
The indicator on the upper right corner of the panel will show the current volume level.
Switch among the following modes:
Repeat the current file
Repeat all (Default)
Single playback
Sampling playback
Sequence
Open Play List
Equalizer Open or close the equalizer panel.
Help
Exit
Normal sequence (Default)
Random sequence
Open play list. (See next page)
(See below for more information.)
Introduce the function and operation of each icon. Click on an icon and a line of function description for that icon appears at the bottom of the screen.
Close MP3 player.
MP3-P
LAYER
33
Play list
To manage your play list following possibilities are given:
Add Title
Add a new song to your play list. This can be selected from the appearing window.
Delete Title
Removes one song from your play list.
Delete All
Remove all songs from your play list.
Click on
Click on
Attention: The play list will not be saved when you leave the MP3-Player application.
34
to return to the main menu.
to return to the main menu.
NGLISH
E
FAQ
Where can I find more informationen on the navigation system?
What do I need the accompanied CDs/DVDs for?
Detailed operating instructions for navigation can be found on the corresponding CDs/DVDs, which accompany your navigation system.
Also use the additional Help functions that are available with a single touch of a button (usually F1 on the PC), or by selecting the Help option, as additional assistance. These aids will be provided to you while you are using the computer or the device.
The Support-CD contains:
Contents of the navigation-CD(s)/DVD(s):
the ActiveSync® program for balancing data be-
tween the navigation system and the PC
Additional programs (optional).
This User manual in digital form.
.
digital maps
Data for rapidly resetting the contents of the
memory card
Manual of the navigation software
Depending on the configuration one or more CDs/DVDs may be included in the package.
The navigation system is no longer responding. What should I do?
Carry out a soft-reset (see page 23).
How can I adjust the lighting?
Under Settings Ö Lightning.
MP3-P
LAYER
35
Customer Service
First-Aid in the Event of Malfunction
Error functions can sometimes have trivial causes; however, they can also sometimes be complex in nature and require costly analysis.
General guidance
Note: The regular running of the Windows® pro-
i
grams “Defrag” and “Scandisk” on the PC can remove sources of error and raise system performance.
Check Connections and Cables
Start with a careful visual check of all cable links. If the LCD’s are not working, make sure that the power is reaching the computer and all peripherals.
Note: Switch off the computer and check all cable
i
links. If the computer is connected to peripherals, check also the plug connections of all cables. Do not arbitrarily swap the cables between various units, even if they appear to be precisely the same. The pin assignments of the cables are likely to be different. Once you have ascertained that the power supply is not at fault and all connections are intact, switch on the computer again.
36
NGLISH
E
Faults and Possible Causes
The navigation system no longer reacts or is behaving atypically.
Carry out a soft reset (see page 23).
The navigation system is recognized only as a guest by ActiveSync
See informationen on page 40.
I am receiving error messages from a maintenance pro­gram after installing ActiveSync
The program places the WCESCOMM.LOG file in a tempo-
The GPS receiver cannot be initialized or found.
If a GPS signal continues not to be reported on the screen, in spite of the correct installation of the system, this can be caused by the fol­lowing factors:
Sufficient satellite reception is not possible.
No language statements can be heard.
Check the volume setting.
®
.
®
.
rary directory defined by the system, which cannot be de­leted. A respective error message will appear, if another program attempts to do so.
Solution: Change the position of your navigation system and ensure that unrestricted “sight” of the aerial is not impaired.
USTOMER SERVICE
C
37
Additional Support
If the suggestions in the above section have not solved your prob­lem, please contact our customer service hotline. However, before you contact your Technology Center, please have the following in­formation available:
However, before you contact your Technology Center, please have the following information available:
How is your computer configured?
What additional peripherals do you use?
What messages, if any, appear on your screen?
What software were you using when the error occurred?
What steps have you already undertaken to solve the
problem?
Have you upgraded or removed drivers or hardware?
Can you manually repeat the problem?
If you have been given a customer number previously,
please give this number to the technician.
38
NGLISH
E
Appendix
Synchronisation with the PC
I. Installing Microsoft® ActiveSync®
In order to transfer your data between your PC and your naviga­tion system you need the Microsoft
The cost of the navigation system includes a license for this pro­gram which can be found on the Support CD.
Attention: Important files can be overwritten or
!
changed during the installation of software. You should create a hard disk backup, in order to be able to have access to the original files in the case of pos­sible problems following the installation.
®
ActiveSync® program.
You must have administrator rights to install the software under Windows
!
1. Insert the Support CD and wait until the program starts
i
2. Choose the language, click then Install ActiveSync® and
®
2000 or XP.
Attention: You should not connect the navigation system to your computer yet.
automatically.
Note: The Auto Run function is probably deactivated if it does not function. The Setup program on the CD must be started, to start installation manually.
follow the instructions on the screen.
PPENDIX
A
39
II. Connecting with the PC
1. Press the On/Off button to start your navigation system.
2. Connect the USB cable to your navigation system.
3. Push the USB connector into a free USB port on your com­puter.
4. The hardware installation assistant recognizes now a new appliance and installs a suitable driver which can take some minutes. Repeat the die connection search if it fails the first time.
5. Follow the instructions on the screen. The program will now set up a partnership between your PC and the device.
III. Working with Microsoft® ActiveSync®
ActiveSync® will be started automatically if you connect your navigation system to the PC. The program will check whether the device is one with which a partnership has been entered. If this is the case, the changes that have taken place on the PC and on the navigation system since the last synchronisation will be compared and adjusted to each other. You will be able to define exactly which data will have priority during the synchronisation in the settings of the ActiveSync gram (with the F1 Button), in order to become familiar with the effects of the respective settings. A restricted Guest Access, with which you will be able to exchange data, for example, will become active automatically if the navigation system has not been recog­nised as a partner. If this is the case, although the process con­cerns the registered partner device, separate your navigation sys­tem from the PC and switch it off and on again. Now connect your navigation system to the PC, to restart the recognition process. Repeat the process and, restart your PC in addition, if your device continues to be recognised as a guest.
Note: Make sure that you always connect your navigation system to your PC with the same USB connection, otherwise your PC will allocate an additional ID and reinstall the device.
®
Program. Call up the Help of the Pro-
40
NGLISH
E
GPS (Global Positioning System)
GPS is a satellite-backed system for determining your position. With the help of 24 satellites revolving around the earth, it is pos­sible to determine your position on earth with the accuracy of a few meters. The satellite signals are received by the antenna of the built-in GPS receiver, which must have a "line of sight" to at least 4 of these.
Note: By limited line of sight (e.g. in tunnels, be-
i
tween houses, in woods or also in vehicles with metal-coated windows) it is not possible to determine the position. The satellite reception however auto­matically picks up again as soon as the obstacle has been passed and there line of sight is reestablished again. Moving slowly (e.g. slow walking) also limits the ac­curacy of the navigation.
The GPS receiver consumes additional power. This is especially of concern, when running on batteries. To conserve power do not turn on the GPS receiver unnecessarily. Also terminate the Navi­gation Software, if it is not needed or satellite reception is not possible for a longer period, for this reason. However, you can also switch the device off by means of the On/Off switch in the case of a shorter interruption to your journey. Pressing the same switch again will activate a restart. The GPS receiver will also be reactivated at the same time, if navigation software is still active. Here, it can take a short time for the position to be updated again, according to the reception situation.
Note: Please note, that your appliance is preset to
i
not shut down automatically after a few minutes
without activity. You can change this preset in the Set­tings mode. If the GPS receiver has not been active for some hours, it must orientate itself again. This process may take a while.
PPENDIX
A
41
External GPS antenna
This second optional GPS antenna (only for Model A) makes it possible to receive the signals of satellites better (e. g. in the case of vehicles with a metallized windscreen).
1. The antenna should be pointing upwards.
2. Push the plug of the external GPS antenna into the opening provided for it at the rear side of your device (see page 12, p).
42
NGLISH
E
TMC (Traffic Message Channel)
The Traffic Message Channel (TMC) is a digital radio data ser­vice that functions in a similar way to RDS and is used to transmit disruptions to traffic to a suitable reception device.
The traffic information is continuously transmitted across FM. The user is less dependent on the half-hourly broadcast traffic
information, because the signal is continuously transmitted. Apart from this, important information, as in the case of people driving on the wrong side of the road for example, can be passed on im­mediately.
The transmission is planned for the whole of Europe and is al­ready offered by radio transmitters in many countries. The preci­sion of the TMC messages can deviate greatly according to the country.
The evaluation of TMC messages is not supported by every type of navigation software. Enquire whether your system supports TMC before the possible purchase of a TMC receiver.
PPENDIX
A
43
Additional card material
There is an already digitalized card for your country on the optional the memory card. Depending on the configuration, addi­tional maps may be included on your navigation CDs/DVDs. You will be able to transfer these cards to a memory card immedi­ately. Here, it is recommended to use an external card reader (see also page 22).
Depending on the amount of map data on the CDs/DVDs, memory cards with capacities of 256 MB, 512 MB, 1.024 MB or more may be required.
You will obtain additional memory cards (MMC or SD cards) in specialist stores.
Transfer of card material to a memory card
The transfer of additional card material to a memory card will preferably take place through the Explorer of your PCs. Proceed as follows:
1. Insert the CD/DVD with the card material required.
2. Start your workstation and select your CD/DVD Drive.
3. Copy the file with the .map ending out of the Directory of the region that you require to the MapRegions Directory on your memory card, from the CD/DVD.
You can transfer several files with map material to your memory card, depending on the capacity of the memory card. There must be sufficient space on your memory card.
If you have copied digitized maps of several countries or country groups onto your memory card, you will be required to select the desired map in the navigation application of your device.
44
NGLISH
E
Mounting the Navigation Set on a Bicycle
You can attach your navigation system to a bicycle as an op­tional additional feature. A special holder is needed to do this.
The installation is explained in the following.
Screws
Hexagon key
Clamp
Holding plate
(similar picture)
1. Release both the screws connecting the clamp to the hold­ing plate with the hexagon key.
2. Remove the rubber ring and wind it around the handlebars.
3. Position the clamp on your bicycle handlebars, by pulling it across the handlebars from below.
4. Put the holding plate back onto the clamp and retighten both the screws.
5. Seat the holder for the navigation system on the holder plate until it locks into place audibly. Please pay attention to the fact that the holder must only be seated in one direc- tion.
6. Now place the device on the holder. You must pay attention to firm positioning.
Note: Your navigation system could also be equipped
i
with a different bicycle mounting, where the attach­ment of mountings can vary slightly, according to the version.
PPENDIX
A
45
Specifications
Parameter Information
Power supply
with mains adapter or a power supply cable for a cigarette
lighter
Memory card type MMC and SD
Connector type of the external GPS receiver
USB interface
Dimensions
Weight incl. battery approx. 190 g (without
Temperatures
Humidity (without condensation)
Phihong PSC05R-050 Atech ATPI-68HT0501
MMCX
USB 1.1
115 mm x 81 mm x 35 mm
packaging)
Operating Operating
Storage Storage
10 – 90 %
46
NGLISH
E
Warranty
The receipt serves as proof of first purchase and should be kept in a safe place. Your legal rights are not limited ditions. It is required should you need to make use of the guarantee.
We guarantee that this equipment is in perfect working order. Upon production of the receipt, the remaining period of guarantee shall pass on from the original parts to the respective replacement parts. If you hand in this equipment to make use of the guaran­tee, you must remove all programs, data and removable storage media. Products which are sent without accessories will be re­placed without accessories. The warranty obligation does not ap­ply in the case of the problem being caused by an accident, a ca­tastrophe, vandalism, misuse, incorrect use, ignoring the safety and maintenance regulations, changes by software, viruses or another piece of equipment or accessories or by other modifica­tions not approved by ourselves. This limited guarantee declara­tion replaces all other guarantees of express or implied nature. This includes the guarantee of saleability or the suitability for a certain purpose but is not limited to this. In some countries the exclusion of implied guarantees is not permissible upon principle. In this case the validity of all express and implied guarantees is limited to the guarantee period. Once this period has expired, all guarantees become invalid. In some countries limiting the period of validity for implied guarantees is not permitted, so that the above limitation does not come into force. If you have any ques­tions with regard to these guarantee conditions, please contact us.
by these warranty con-
ARRANTY
W
47
Liability limitations
The contents of this manual are subject to unannounced changes caused by technical progress. Manufacturer and sales shall not be responsible for any damages which have been caused as a result of omissions or errors in the information provided in this manual.
Under no circumstances shall we be liable for any of the following:
1. Claims made against you by third parties based on loss or damage.
2. Loss or damage to your blanks, recordings or data.
3. Economic follow-on damage (including lost profit or savings) or associated damage even in the case that we have been informed of the possibilities of this type of damage.
In some countries the exclusion or limitation of accompanying or follow-on damage is not legally accepted so that the above limita­tions do not come into force.
Copying this manual
This document contains legally protected information. All rights reserved. Copying in mechanical, electronic and any other form without the written approval of the manufacturer is prohibited.
48
NGLISH
E
Index
A
AC Adapter..........................17
Accessing Memory Cards .......22
Additional card material.........44
Aerial Orientation .................26
Ambient temperature............. 3
Attach Navigation System......29
Auto run .............................39
Auto start............................39
B
Battery Charge Indicator .......11
Battery Operation.................. 6
C
Cabling ................................ 5
Car Adapter.........................17
Card reader .........................22
Care of the Display ................ 7
Connecting the car adapter....30
Contents ............................... i
Copying this manual .............48
Copyright .............................iv
Customer Service .................36
D
Data exchange.....................22
Data Security........................ 2
Defragmentation ..................36
E
Earphones ...........................14
Electromagnetic Compatibility . 4
EMC .................................... 4
External aerial connection......12
External GPS antenna ...........42
F
FAQ....................................35
Faults and Possible Causes ....37
First-Aid ............................. 36
Fixing the suction plate......... 29
G
GPS ................................... 41
External GPS antenna........ 42
H
Hard Reset.......................... 23
Hardware............................ 15
Hotline ............................... 38
I
Initial Set-up
Charging the battery ......... 16
Installing the navigation
software ....................... 19
Switching on the navigation
system ......................... 18
Introduction ..........................9
L
Liability limitations ............... 48
Loudspeaker ....................... 12
M
Main switch/ Battery button... 13
Maintenance..........................7
Malfunction ......................... 36
Microsoft
Mini-USB-Connector ............. 13
Mounting the car holder ........ 28
Mounting the Navigation Set
on a Bicycle ..................... 45
MP3-Player.......................... 32
Main Screen Overview ....... 32
Play list ........................... 34
N
Navigation
Safety instructions ............ 24
®
ActiveSync®......... 39
NDEX
I
49
O
Operating
Switching on/off the device.20 Working with memory cards21
Operating Environment .......... 2
Q
Quality................................. 9
R
Repair ................................. 3
Reparatur............................. 3
Reset Opening .....................13
Resetting the navigation
system
Hard Reset .......................23
Soft Reset ........................23
S
Safety and Maintenance ......... 1
Safety instructions
Navigation........................24
Connection ........................ 5
Data security ..................... 2
Operating environment ....... 2
Repair .............................. 3
Power supply ..................... 5
Cabling ............................. 5
Battery operation ............... 6
Maintenance ...................... 7
Care of the display .............. 7
Transport...........................8
Scandisk............................. 36
SD/MMC Slot....................... 13
Service.................................9
Soft Reset........................... 23
Specifications ...................... 46
Starting the navigation
software .......................... 31
Supplied Items .................... 10
Synchronisation with the PC .. 39
T
TMC ................................... 43
Connecting the TMC dipole
antenna........................ 27
Touch Screen ...................... 11
Transfer of card material to
a memory card ................. 44
Transport.............................. 8
V
Views
Back components.............. 12
Bottom components .......... 13
Front components ............. 11
Left components ............... 14
Right components ............. 15
W
Warranty ............................ 47
50
NGLISH
E
Loading...