Portable Intelligent Power Supply
User’s Guide
MODEL
MD-CP12150
Image 5
Image6
Image7
Image8
2.DCout cable(Image 6)
3.USB Convert cable(Image7)
4.Digital tips(Image8)
5.Adapter (Image9)
6.Car cigarette adapter(Image 10)
Image 9 Image 10
configuration list
NO
Article
1
2
3
4
5
6
7
Portable Universal Intelligent Power Supply
User Guide's
Output Cable
Convert Tip
Guarantee Card
Car Cigarette Adapter
Adapter
Information above may be different from the practical product,any change will
not be informed.
Unit
Remark
1
8
1
1
1
1
optional
1.Device tips (Image5)
1
Accessories
Image 11
7.Solar panel (Image 11)
Specifications of solar panel:
Power 20W
working Voltage 15V
8
Solar panel
1
optional
All rights reservede by medilitech
.
Electric Specification
Capacity: 150Wh
Input :DC 15V (3A)
Output :DC 12V(5A)
Standbycurrent: ＜20
μ
A
Temperaturetolerance range: －10℃～45℃
Operation
Charging
Image1
1. Choose a suitable convert tip according to your device adapter plug(Image
1.). Then connect the device adapter to the ACpower source ,After while
connect the AC adapter to the battery DC in jack through the convert
tip(Image 2).
2. The Led will be cycly lit when charging the battery. All Led will be lit on
always when thebattery is fully charged.
Discharging
1. Selectthe closest voltage according to your originaldevice adapter.
2. Choose the right tip according to your original device adapter tip.(See Image.3).
3. Push the switch inthe （on） side, the battery pack will be turned on ,and the
red led B will show the work status. Change it in the （off）side ,it will be
turned off.
WARNING!
1. To prevent fire ,moisture ,explosion hazards, or high temperature
environments.
2. To prevent the risk of electric short circuit.
3. non-professional maintenance staff, do not open theproduct.
4. Do not charge it or open the battery pack when you find something is not at
normal status.
5. Please read the user’s guide carefully before you use the captioned model.
Be sure to follow the steps of the user’s guide strictly.
Attention:
1. Turn off it and then turn on thebattery pack once short circuit occurred.
2. Make sure the DC out voltage of your AC adapter is between 13V-20V,
Otherwise you may not able to charge or damage the battery.
3. The output voltage is the same as the voltage of the battery pack when the
battery pack isbe charging.
4. Please recharge your battery pack every six months even when you don't use
it for long-termin order to assure the product performance.
Power Meter (image 4)
Image4
Image 2
Image 3
A
B
A: Power display button
B: power Display and low
power alarm
B flickerling less than 5% power level
C on about 25% power level
C+D on about 50% power level
C+D+E on about 75% power level
C+D+E+F on over 95% power level
Press the power display button ,the number of the LED lights will show you power
consumption. Specification for Power Meter:
C
E
FD
Attention:
1. Should purchase an special adapter from us if find this is ( a ) your device AC
adapter can not plug in the DC in jack to charge the battery pack directly.( b )
there is no suitable convert tip for your device. ( c ) the voltage of your AC
adapterbeyond 13V-20V andpower below 60w.
2. The polarityofAC adapter: inner anode, outer cathode (Image1).
Inner +
Outer
OFF
ON
Loading...