Media-Tech U-SCREEN STICKER User Manual
U-SCREEN
STICKER
HD TERRESTRIAL
DIGITAL TV STB & PLAYER
MT4166
User Manual
Index
EN
Index ................................................................................................ 2
Overview ........................................................................................ 2
Remote Control ............................................................................3
Battery installation in remote control ..................................4
Using remote control .................................................................4
Connections .................................................................................. 4
First Time Installation .................................................................5
Menu ................................................................................................ 6
SETUP&MORE................................................................................6
Setup/Installation ........................................................................6
BROADCASTING – TV, Radio and Recorder ........................7
MULTIMEDIA.................................................................................. 8
NAVI Bar ..........................................................................................8
TimeShift ......................................................................................10
Recording .....................................................................................10
Troubleshooting ........................................................................11
2
Overview
7
1
234
1. USB 2.0 socket for USB pendrive/USB HDD/fl ash card
reader.
2. Power supply DC 5V socket.
3. Aerial socket.
4. Aerial loop.
5. HDMI output.
6. IR receiver/SPDIF socket.
7. SCART output.
Note! When device is connected via HDMI there is
no signal at SCART output.
Note! When USB HDD is connected we recommend
using external power supply (5V, 2A) for this drive
(not provided).
6
5
1
17
18
19
20
21
22
23
24
25
26
27
28
29 30 31 32
10
11
12
13
14
15
16
2
3
4
5
6
7
8
9
Remote Control
1. POWER – power on/switch into
Standby mode.
2. MUTE – enable/disable mute function.
3. TV – TV mode.
4. GOTO – jump into desired place in the
fi le.
5. PROG.
6. NAVI – show NAVI menu.
7. RECORD – start recording.
8. EXIT.
9. OK.
10. AUDIO – select desired soundtrack.
11. SUBTILE – select subtitles.
12. Channel up/down.
13. FAVOURITE.
14. REPEAT.
15. NEXT.
16. PREV.
17. Numeric keypad.
18. INFO.
19. MENU.
20. Navigation buttons LEFT/RIGHT/UP/
DOWN
21. EPG.
22. TTX .
23. VOLUME.
24. TV/RADIO – switch mode TV/RADIO.
25. RECALL – show last channel.
26. SLOW.
27. ZOOM.
28. RED/GREEN/YELLOW/BLUE – functions depend on menu, function
described with icons.
29. PLAY/PAUSE – enable TimeShift
function in TV mode, play/pause
when in multimedia mode.
30. STOP – stop playback in multimedia
mode, stop TimeShift or recording in
TV mode
31. REW – rewind.
32. FWD – fast forward.
*NAVI – to show NAVI bar press NAVI
button or EXIT button when exiting from
EPG, TTX, AUDIO or SUBTITLE menu.
Press again EXIT to close NAVI bar.
EN
3
Battery installation in remote control
EN
1. Open cover.
2. Install battery, note polarization marks.
3. Close cover.
Using remote control
Place IR receiver next to TV screen so it can receive signal from remote control without obstacles.
4
Connections
Loading...