
Overview Installation steps
Smartphone
holder
Shutter
button
Headphones
4pin mini-jack
plug
1. Place your smartphone in holder.

2. Connect mini-jack plug to headphones
socket. If shutter button does not release
shutter but only changes volume in your
smartphone - it is required to install application (go to step 4).
3. Extend sele stick arm to desired length
and adjust tilt as needed.

4. iPhone smartphones do not require
additional application to work with shutter
button. Also many branded smartphones
work without additional application (for
instance Samsung). Some smartphones
(based on Android 4.2.2 or later) require
to install and use free application
Camera360 – you can download it form
GooglePlay store (for instance Sony Z3).
Note! System Android 4.2.2 or later must
be released by smartphone manufacturer.
User modications and unauthorized updates may cause shutter button malfunction or a complete lack of reaction.
5. Place smartphone at yourself and press
shutter button.
Due to continuous development specication and appearance of product are subject to
change without prior notice. For technical support please visit www.media-tech.eu.