Page 1
HDD DOCKING
STATION PRO
External HDD & Memory Card Management
MT5078
User Manual
Page 2
EN
OTB
XD: XD, XD Type H, XD Type M SD: SD, SD Elite Pro, SD 133XS, SD ultra II, SD ultra plus,
SDHC, SD EXTREME III, SD Elite Pro, Mini SD, T-Flash MMC: MMC1, MMC2, MMC 4.0,
MMC4.1, MMC Plus, HS MMC, RS-MMC, M2, MMC micro MS: MS, MS Pro, MS Pro Duo,
MS Pro Magic gate, MS Pro Duo Magic gate, MS Pro high-speed, MS Pro Duo high-speed,
MS Pro Duo ultra II, MS Pro Duo Extreme III MD: Micro Drive CF: CF Type I, CF Type II, CF
ULTRA II, CF EXTREME III, CF EXTREME IV, CF133Xs, CF HIGH SPEED, CF Ultimate, CF Elite Pro
2
Page 3
Please read this user manual before installing and
enabling device.
1. System requirement
Windows 2000/XP/Vista, Linux, Mac10.X
2. Package content
■ USB 2.0 data cable
■ Driver
■ User manual
■ Power Adapter
3. Connection
3.1 Connection to computer and power
See page 2
3.2 Installing 2,5” HDD
a) Put bracket inside the HDD compartment.
b) Switch o device. Put carefully 2,5” HDD into the
HDD compartment.
a)
b)
EN
3
Page 4
c) Connect MT5078 with computer using USB2.0 cable
EN
or E-SATA cable (not included).
d) Enable device with ON/OFF switch.
NOTE. New (not partitioned) hard discs must be initialized in Windows system before formatting. HDD
initialization procedure is described in MS Windows
help (F1).
3.3 Installing 3,5” HDD
a) Remove bracket from HDD compartment.
b) Switch o device. Put carefully 3,5” HDD into the
HDD compartment.
c) Connect MT5078 with computer using USB2.0 cable
or E-SATA cable (not included).
d) Enable device with ON/OFF switch.
NOTE.
New (not partitioned) hard discs must be initialized
in Windows system before formatting. HDD initialization procedure is described in MS Windows help
(F1).
NOTE.
Everytime when HDD is inserting or removing,
COMBO TERMINAL must be switched OFF to avoid
HDD electrical damage.
4
b)
4. Use built-in card reader
After device installation in the system inserted HDD
and card reader will be identi ed as disk icons in My
computer group. Insert carefully memory card to proper slot and click corresponding disk icon.
Page 5
5. Use E-SATA
The E-SATA interface is working only for transmission
data from/to inserted HDD. Card reader and USB hub
requires USB connection.
NOTE.
System must be restarted after HDD connection
through E-SATA interface.
6. One touch backup (OTB)
COMBO TERMINAL is equipped with OTB button to
create automatic backup of speci ed les and folders
when is connected to computer. To use this feature You
have to install software rst.
NOTE:
OTB function works only via USB. Will not works if
HDD connected to E-SATA.
6.1 Installation
a) To install OTB software, insert software CD-ROM to
optical drive and open “OTB_util_x_setup.exe” le.
EN
5
Page 6
b) Click “Next“
EN
d) Click “Install“
c) Click “Next“
6
e) Click “Next“
Page 7
f) Click “Finish”
b) Click “Copy From:” “Select ”, and choose source folder.
EN
6.2 Use OTB utility
a) Open OTB utility
c) Click “Copy To:” “Select”, and choose destination fol-
der.
7
Page 8
d) Press OTB (POWER/DATA) button on Product. Back-
EN
up will start.
e) Backup nish.
8
NOTE.
Media-Tech is not responsible for any lost of data on
HDD and memory cards.
Loading...