media-tech MT4162 User Manual

User Manual
DVB-T
VERTO
HD TERRESTRIAL
DIGITAL TV STB & PLAYER
MT4162
2
Index
Index ................................................................................................ 2
Overview ........................................................................................ 2
Remote Control ............................................................................3
Battery installation in remote control .................................. 4
Using remote control ................................................................. 4
Connections .................................................................................. 4
First Time Installation ................................................................. 5
Menu ................................................................................................ 6
SETUP&MORE................................................................................6
Setup/Installation ........................................................................6
BROADCASTING – TV, Radio and Recorder ........................7
MULTIMEDIA.................................................................................. 8
NAVI Bar ..........................................................................................8
TimeShift ......................................................................................10
Recording .....................................................................................10
Troubleshooting ........................................................................11
Overview
1. USB 2.0 socket for USB pendrive/USB HDD/fl ash card reader
2. Aerial loop
3. Aerial socket
4. HDMI output
5. SCART output
6. Power supply DC 5V socket
7. SPDIF socket
8. ON/OFF
Note! When device is connected via HDMI there is no signal at SCART output. Note! When USB HDD is connected we recommend using external power supply (5V, 2A) for this drive (not provided).
8
654321
7
Front
Back
To p
3
1. POWER – power on/switch into Standby mode.
2. MUTE – enable/disable mute function.
3. TV – TV mode.
4. GOTO – jump into desired place in the fi le.
5. PROG.
6. NAVI – show NAVI menu.
7. RECORD – start recording.
8. EXIT.
9. OK.
10. AUDIO – select desired soundtrack.
11. SUBTILE – select subtitles.
12. Channel up/down.
13. FAVOURITE.
14. REPEAT.
15. NEXT.
16. PREV.
17. Numeric keypad.
18. INFO.
19. MENU.
20. Navigation buttons LEFT/RIGHT/UP/ DOWN
21. EPG.
22. TTX .
23. VOLUME.
24. TV/RADIO – switch mode TV/RADIO.
25. RECALL – show last channel.
26. SLOW.
27. ZOOM.
28. RED/GREEN/YELLOW/BLUE – func­tions depend on menu, function described with icons.
29. PLAY/PAUSE – enable TimeShift function in TV mode, play/pause when in multimedia mode.
30. STOP – stop playback in multimedia mode, stop TimeShift or recording in TV mode
31. REW – rewind.
32. FWD – fast forward.
*NAVI – to show NAVI bar press NAVI button or EXIT button when exiting from EPG, TTX, AUDIO or SUBTITLE menu. Press again EXIT to close NAVI bar.
Remote Control
1
17
18
19
20
21
22
23
24 25 26 27
28
29 30 31 32
2
3
4
5
6
7
9
8
10
12
13
14
15 16
11
4
Battery installation in remote control
Using remote control
Place IR receiver next to TV screen so it can receive sig­nal from remote control without obstacles.
1. Open cover.
2. Install battery, note polarization marks.
3. Close cover.
Connections
5
First Time Installation
Choose “OSD Language” and “Country Setting”, “Region Setting” according to your location, then press <OK> to start auto scan when focus on any items.
Set OSD Language, Country setting and Region setting.
Focus on AutoScan and press OK to start auto scan.
Once the service scan is fi nished and all the services are stored into the database, user can start to watch the digital terrestrial TV channel or listen to the radio broadcast.
6
Menu
Press MENU to enter main menu. Press UP/DOWN until switching to SETUP & MORE, MULTIMEDIA or BROAD­CASTING.
SETUP&MORE
Press LEFT/RIGHT until switching to SETUP, MORE or GAMES.
Setup/Installation
Antenna Setting: Set the antenna power on or off .
Country Setting: Change the country will apply the
default frequency table for later scanning and Time Zone.
OSD Language: Set the On Screen Display Language. Audio Language: Specify service audio output when
watching. Subtitle Language: Choose subtitle display language when watching.
LCN: Set the Logical Channel Number to on or off . Auto Switch Off : Set Auto Switch on/off .
Setup/My Box
Power On at: Set power on at TV or Menu option. OSD style: Set OSD style to Green or Blue option.
7
GMT Usage: Set GMT usage to AUTO or Manual. Region setting: it will be used to match the appropri-
ate time zone.
Time Zone: modify the time zone.
Setup/TV Setup
Sleep Time: Set the sleep time to OFF,15,30,45,60,90,120
minutes. TV format: Set display format for watching program, such as 4:3LB (LetterBox), 4:3PS (PanScan), 16:9 (Pillar­Box), 16:9FIT.
OSD Transparency: Set the OSD transparency. Banner Display Time: Set OSD displays time. Video Output: RCA (CVBS) or HDMI. TV Resolution: Set HDMI video output resolution. Digital Audio Output: LPCM or RAW.
Setup/Password
Set password for channel lock or censorship lock, or change password. The default PIN Code is 6666. it would be this default PIN code after “Set Default” op­eration.
Menu Lock: Lock the menus. Channel Lock: Lock the channel. Censorship Lock: Lock the program by password and
censorship threshold. Change Password: Enter old password, new password and confi rm new password.
Setup/SW Update
USB Upgrade: Upgrade the box application software
through devices. USB Backup: Backup the data in the box to USB de­vices.
OTA: Set the OTA mode to Disable, AUTO, Manual.
Setup/Set Default
Restore box to factory default.
Setup/Device Remove
For safely remove the USB devices.
BROADCASTING – TV, Radio and Recorder
Set BROADCASTING/RECORDER.
8
MULTIMEDIA
Press LEFT/RIGHT until switching to PHOTO, MUSIC, or MOVIE.
NAVI Bar
Press EXIT button in EPG, TTX, AUDIO or SUBTITLE menu.
9
Press LEFT/RIGHT to select item:
TV Guide: EPG (Electronic Program Guide). TV list: List the channels. Subtitle: Choose subtitle display language when
watching.
Teletext: teletext on. Audio Language: Specify service audio output when
watching.
Zoom+: enlarge screen size
Option: TV Setup, Password and PVR. Set PVR:
TimeShift: Set timeshift ON/OFF or AUTO. Press
<Exit> to exit and save current settings.
One Button Recording: If “One Button Recording”
is ON, pressing <REC> in service mode would start recording immediately.
Default Recording Period: set default record dura-
tion by pressing <REC>.
TimeShift Size: TimeShift free space info
Advanced Timer: It may store simultaneously 10 chan­nel bookings in maximum. Every booking can switch to watch or record the specifi ed channel in specifi ed duration.
You can also press YELLOW button inside EPG to add selected item to Timers table.
10
TimeShift
User may use timeshift function to watch the channel content before current live play time, which is already broadcasted before for several minutes or event sev­eral hours. Timeshift data is recorded to several fi les in circle mode. When data buff er is full, the oldest recording fi le would be deleted to free space for new one. While, if the old­est recording fi le is in playback, its next fi le would be deleted instead. In this case, playback may lost some data. Press <Pause> to enter pause state, press <Play> to start playback. Pressing <Stop> or switching channel would trigger a message box to confi rm whether to stop timeshift.
Recording
Press RECORD button to start recording. If “One Button Recording” option is enabled recording will automati­cally stop after “Default Recording Period”. Press STOP and select OK to stop recording manually.
Functions and technical specifi cation of device are subject to change without prior notice. For technical support please visit www.media-tech.eu
11
Troubleshooting
Problem Potential Reasons What to do
No picture Power isn’t connected Connect the power
The power switch is not on Switch on the power
Screen shows “No Signal” Not connect DVB-T cable Plug in the DVB-T cable
Incorrect setting Set up correct parameter
No sound from speaker No or incorrect connection with audio
cable
Connect the audio cable correctly
Mute the sound Switch on the correct volume control
Incorrect sound track Try another sound track
Only sound, no image on the screen
No or incorrect connection with AV cable
Connect the audio cable correctly
The program is a radio program Press <TV/RADIO> key to shift into
TV mode
Remote control unit is not workable
The battery is exhausted Change new battery
Remote control unit is not in the right opposite of the front panel or too far from it
Adjust the way of holding remote control unit and near from the panel
The image stop suddenly or mosaic
The signal is too weak Strengthen the signal
12
Loading...