media-tech MT4052 User Manual

Page 1
User Manual
INDOOR
SECURECAM
HD
MT4052
Page 2
2
EN
Product introduction............................................................. 4
Installation and Operation Guide ........................................ 4
Overview ................................................................................ 5
1� Status bar ��������������������������������������������������������������������������������������������������������7 2� Choose video stream ����������������������������������������������������������������������������������8 3� Playback ����������������������������������������������������������������������������������������������������������8
Other Web Browser��������������������������������������������������������������������������������������� 10 Other common software ���������������������������������������������������������������������������� 10
Video setting ���������������������������������������������������������������������������������������������11
Video parameters ������������������������������������������������������������������������������������������ 11 Audio parameters ����������������������������������������������������������������������������������������� 11 Image parameters ����������������������������������������������������������������������������������������� 11
Web setting �����������������������������������������������������������������������������������������������12
Index
Basic web setting ������������������������������������������������������������������������������������������ 12 WIFI setting ������������������������������������������������������������������������������������������������������ 12 WAN access setting��������������������������������������������������������������������������������������� 12 ONVIF setting �������������������������������������������������������������������������������������������������� 13
Alarm setting ��������������������������������������������������������������������������������������������13
Motion Detection Setting �������������������������������������������������������������������������� 13 Alarm mode setting ������������������������������������������������������������������������������������� 14 Alarm time setting ���������������������������������������������������������������������������������������� 14
Advanced setting ������������������������������������������������������������������������������������14
User management ���������������������������������������������������������������������������������������� 14 E-mail Setting ������������������������������������������������������������������������������������������������� 15 FTP setting ������������������������������������������������������������������������������������������������������� 15 Multiple settings �������������������������������������������������������������������������������������������� 15
System setting ������������������������������������������������������������������������������������������16
Device information ��������������������������������������������������������������������������������������� 16 Date and time setting ���������������������������������������������������������������������������������� 16 Initialize setting���������������������������������������������������������������������������������������������� 16 System Log ������������������������������������������������������������������������������������������������������ 17
Page 3
3
EN
1� Be careful not to damage the camera or subject it to
strong impacts or shocks�
2� Do not touch the optical components for the image sen-
sor, such as the lens, if necessary, please place a clean and moistened cloth with alcohol and wipe the dirt gen­tly; When not in use, please place the dust cover on to the item to protect the image sensor�
Notice
Keep away from the places for high-temperature, heat
source and direct sunlight;
Keep away from water and when get wet, cut o the
power immediately�
Avoid using at damp environment; the reference range
for operation humidity is below 85%RH�
Operation temperature is -10° ~ +50° Please install it horizontally or wall mount, avoid strenu-
ous vibration and do not place other items on top of the unit�
Transport and Handling
Please handle the item with care� Do not use in areas around condensation� Please disconnect the item from the mains before mov-
ing�
3� Do not aim the camera directly into the sun or at other
intense light sources that could aect the image quality, this will also shorten the service life for the image sen­sor�
4� Keep away from laser when it is working, otherwise the
image sensor can be damaged�
5� If the equipment is not working properly, please contact
the store or the service centre, do not disassemble or modify the equipment in any way�
Page 4
4
EN
Installation and Operation Guide
View video by mobile phone software
You need to download and install “iSmartviewPro” mobile phone client software from attached CD, and then scan QR code on the camera body to add camera for viewing video, for detail, please refer to application guide�
The camera features
Max� resolution is 720P;
Build in IR-CUT, 3�6mm lens;
Build in 2pcs array IR LED, up to 15 meter night vision;
Build in WIFI module, support 802�11b/g, easy for con-
necting wireless router;
Support waterproof level IP66 for outdoor use�
Product introduction
Product summary
Thank you for choosing this high denition SmartP2P IP Camera, the IP Camera combines a high denition digital video camera with network connectivity and a powerful web server to bring high denition video to your desktop from anywhere on your local network or over the Internet� It is very suitable for family, shops, oce and so on�
Main features
Support Plug and Play function, view video via free
iSmartviewPro mobile phone or PC client software�
Support 3 kinds of H�264 video stream and 1 way MJPEG
video stream simultaneously, suitable for Local, Internet and Cross-platform view;
Support resolution for 1280x720/640x360/320x180;
Support 4 ways view in a video stream;
Support 802�11b/g protocol, build-in WiFi module to
perform wireless monitoring;
Built-in web server, use one port to send all the data, us-
ers can facilitates network setting;
Support ONVIF and RTSP protocol, easy to integrate it to
NVR or large client software;
Support WPS/QSS function;
Support multi-languages web interface, support 1/4/9
split screen to perform several view at same time;
Manufacturer puts a label of DDNS at the bottom of
each IP Camera� When IP Camera is connected to the internet, this URL can be used to visit the device;
Package for typical production
Power adaptor 12V,
CD,
Network Cable,
Bracket A,
Antenna�
Notice: Please check carefully if all listed items are includ­ed in the package, if anything missing, please contact your vendor�
Page 5
5
EN
Overview
Reset
Power
RJ45
IR LED
Lens
Photoresistor
Antenna
Page 6
6
EN
View video by wired connection in LAN
Power on the IP camera (please check carefully the voltage of power adaptor, don’t insert incorrect power, otherwise it will be damaged), connect IP camera to router by network cable and connect computer to the same router�
Insert attached CD to computer driver, install “SearchPro” application and run it, you will see interface, please oper­ate as the following steps:
1) Click “Search” (Please make sure your rewall will not block up the item to be searched)�
2) Choose a camera and click “IP setting” tab
3) Open web browser and enter address as given in “IP ad­dress” – this is address assign to selected camera� You can also double click camera name in the “Search” tab;
For instance given above you should enter
http://192.168.100.120
4) Enter user name (default: admin) and password (de­fault: 123456) and login IP camera to view the video� (please use IE browser at rst time)�
MT4052
Router
Page 7
7
EN
Notice: Need to download ActiveX when rst use, click “download ActiveX (when rst use)”, will display prompt, click ‘Download Plug-in’ will download and install the” HY­Player” plug-in automatically�
Tips: You can hold on reset button on the camera for 10 seconds to restore factory default if you forget user name and password, or not sure the device parameters�
Click “View Video – Mode 1” to access video interface as below�
1. Status bar
1) Enable/disable on-line view;
2) Enable/disable sound capturing;
3) Enable/disable voice transfer (you must have active microphone in your system to transfer voice to camera, and camera need to have plugged-in speakers);
4) Save snapshot to local disk;
5) Manually start/stop recording onto local disk;
6) Enable digital zoom;
7) Enable/disable multi-view mode�
Page 8
8
EN
Note! In this window le location path are dened on local PC computer, in this window you can manually start/stop re­cording or make snapshot. For automatic surveillance func­tion like motion detection go to “Settings” and dene SD card or FTP server as le storage.
2. Choose video stream
You can choose primary stream or second stream, third stream to view the video� Recommend to view by prima­ry stream in LAN, by second stream in WAN and by third stream in mobile phone� This option is good for preview previously dened quality stream in “Settings”� You can view the video by four-in-one on the same screen, but need to set the camera in multiple setting�
3. Playback
In order to playback recorded les store onto local disk
go to “Playback Video” tab�
View video by WiFi connection in LAN
After nishing the wired connection you can connect the camera by WiFi� Login camera in wired connection and enter wi setting, and then operate as the following step�
Select ‘On’ and click ‘Search’, and then select wireless router in pop-up menu, click ‘OK’ and enter password if needed, click ‘save’ to save the wireless settings� And you can click ‘Test’ to check if the wireless setting is successful� After set­ting successfully, please pull out network cable and reboot the camera to use the wireless connection to view video�
Page 9
9
EN
Because the camera supports WPS/QSS, so you can set wireless by simple way as below.
1� Please conrm if the router connected to camera sup-
ports WPS/QSS (you can check user manual of the router or get the support from router factory);
2� Press WPS/QSS button on the router, it will launch the
function�
3� Press and hold on reset button for 2~5 seconds after
it ran normally (not need connect cable), it will launch the WPS/QSS function, then match the setting with the router, the status LED always on when it was matching, and it will ash after matching successfully�
4� Unplug power adaptor and reboot the camera, then you
can use the wireless connect function�
Notice: The camera will automatically stop the function when the matching is unsuccessful after continuing 50 sec­onds. Due to dierence in the working of the routers, we don’t guarantee that WPS function can be used successfully.
1� Please go to the setting interface of Router, and choose
“Port Forwarding”;
2� Choose “Add custom Service” ; 3� Input IP camera http port; 4� Input LAN IP Address of the camera, click “Apply”
After nishing the port forwarding, you can use WAN IP ad­dress of router and http port of camera to visit the camera by remote computer�
View video in internet
You should connect your internal network to the internet rst and congure port forwarding, please refer to your router manual for further details�
For example: operation step of port forwarding�
Page 10
10
EN
Notice: because the routers are dierent, so the interface and setting method of router are also dierent, how to do the port forwarding for various routers, please refer to the user manual of your router or consult with router manufacturer.
View Video by PC client software
You need to install “iSmartviewPro” PC client software from attached CD, and then add camera to view live video� For detail, please see the “User manual for iSmartViewPro”�
View Video by other way
Other Web Browser
In the Windows OS, for using browser with IE kernel, user must download the ActiveX� While for Safari and Firefox browsers, please Download “QuickTime” plug-in and install it to access the IP camera� After installation, please run the QuickTime program to access the QuickTime Preferences dialog box from Edit Menu, example as below� Click “Ad­vanced”, select “custom�” in the Transport Setup� It pops up the Streaming Transport dialog box� Please select “HTTP” for transport protocol and “80” as port ID, click “ok”, and then return to Transport Setup to change “Custom��” to “Auto”� Finally, click “ok” at the bottom� After nishing these settings, run the Firefox or Safari browser to view the video�
And then run the Safari browser to view the video�
Note: Please select the G�711 audio code format for audio playback in Quicktime plug-in�
In Mac computer, the Quicktime is installed by default, so the user simply accesses setting tool folder at application folder and run the command program, enter command by command line mode: qtdefaultswriteTransportSettingsHTTP80
Other common software
As the device supports RTSP protocol, you can use VLC player to play IP Camera video� It is compatible with VLC 1�1�12 version or above� Please use below URL to visit: rtsp://ip:port/11 (View the video by rst stream)
Page 11
11
EN
All settings
Video setting
In the setting, you can adjust the video, audio and image setting according to actual environment for getting best eect�
Video parameters
rtsp://ip:port/12 (View video by second stream) rtsp://ip:port/13 (View video by third stream) The port is RTSP port�
First stream is for best quality (view by LAN connection), third stream is for mobile devices (small size, better com­pression, less data transfer)�
Audio parameters
Image parameters
You can disable IR LED when you don’t need it, go to “Nightvision” tab and check “turn o IR LED”�
Page 12
12
EN
The cameras support RTSP protocol, if select “on” of “RTSP authority verication”, you need to enter user name and password when invoke video by RTSP protocol�
WIFI setting
Please refer to chapter “View video by WiFi connection in LAN”�
WAN access setting
In chapter “View video by WiFi connection in LAN”, you have known how to do port forwarding� After the success of the port forwarding, you can also visit camera by DDNS� The manufacturer has established a DDNS system, and al­lotted a DDNS to every device, the user can view it from remote PC�
Web setting
Basic web setting
Page 13
13
EN
The camera supports ONVIF protocol, so it can be intercon­nected with other factory camera with ONVIF�
Tips: The device supports ONVIF 2�0�1 at present�
Notice: Using the third party DDNS, if the http port is not
80, the port number should be adding to the domain name with colon� Example: http://mydomain.dyndns.org:81.
ONVIF setting
Alarm setting
Motion Detection Setting
Please click “save” after the settings are done, and motion detection takes eect� The higher value, the higher sensi­tivity� The camera will trigger corresponding alarm when any change occurs in the detection area�
Page 14
14
EN
Note: Please make sure your system time is correct before you set the alarm time period�
Advanced setting
User management
Alarm time setting
The device will trigger the alarm only during the scheduled time period, you can select the scheduled time according to your request� Example of gure below, set armed time from Mon 8:30 to 9:30, you only need to click the corre­sponding time block to set them, the time block will be­come green when you selected�
Alarm mode setting
After camera detects any change, it will alarm as several mode�
Page 15
15
EN
There are 3 levels of user authorization in it� Administrator: “admin” has the highest authority� It can
do any settings� The factory default password: 123456�
Operator: user can only operate the device but can’t do
any settings�
Viewer: user can view the video, but can’t operate the
device�
Note: Please change these passwords when your rst use to ensure your safety�
Please click “Test” to test if the E-mail setting is successful�
E-mail Setting
FTP setting
Before to use FTP function, please get the following ready� 1� FTP user name and password 2� FTP storage space and the authority 3� Create sub-category to store the video or pictures� Notice: The password should not contain special charac­ters�
Multiple settings
Please set multiple devices here rst to view 4 split screen�
Page 16
16
EN
Date and time setting
Initialize setting
System setting
Device information
Please select the time zone at rst and then select a NTP server and obtain time from network time server�
If you click “Conrm” of Backup setting data, the camera will create a le, you can store it to your computer, and you can directly call this le to restore the settings� The func­tion helps to manage the cameras and no need to do all the settings again�
The rmware upgrade is for updating system rmware and web UI�
Page 17
17
EN
System Log
Due to continuous development specication and appear­ance of product are subject to change without prior notice. For technical support please visit www.media-tech.eu.
Loading...