Mede8er MEDX2KEY User Instructions

User Instructions

Enter

Play/
Pause

Back
Light

Return

TM

Info/
About

MEDX2KEY

TM

Wireless USB 2.4 Ghz Keyboard

INDEX

page 1
page 2
page 3
page 4
page 5

General Overview / Charging the keyboard
Connecting the USB Receiver
General Operation
Using the Keyboard
Warranty

Red LED

‘off’ -- battery ok
‘flashing’ -- low battery

Yellow LED

‘on’ -- charging
‘off’ -- fully charged

Plug in the supplied USB Mini
connector into the side of the
keyboard unit and plug the USB
male into your Mede8er’s USB
host port or the USB port on
your PC.

USB Charge Cable

Charging the Battery

Curser Speed Return Arrow Keys

Left Mouse
Button

Right mouse
Button

On/Off

USB Mini
Charge
Connector

General Overview

Back Light

Play / Pause

Enter

LED Status Display

Plug into USB host port

pg 1

MEDX2KEY

Wireless USB 2.4 Ghz Keyboard

Sanji Electronics (Pty) Ltd 106 16th Road, Midrand, Gauteng, South Africa.

Tel [phone] E Mail: [e-mail]

Europe: I

Tel: [phone]. Trade: [e-mail]

Warranty and support: [e-mail]

BDL BV. Fermiweg 9-11, 3208KT Spijkenisse, Netherlands.

Mede8er_medx2key_user_rev3

www.mede8er.com www.mede8er.eu

www.mede8erforum.com

For more information or support please visit

www.mede8er.eu/support/

or call [phone] during business hours.

* Specifications subject to change without notice.

USB Receiver

The range of the keyboard can be effected by metal content so we
suggest that the USB receiver be placed away from the player or any
other metal object. Unclip the USB receiver from the keyboard and
plug in into the USB Female connector. Plug the male USB into one
of the USB host ports on the Mede8er. Position the USB Receiver as
far away from the player as possible with clear sight to the keyboard.

USB FemaleUSB Receiver

The red RF LED should remain ‘off’ when the
keyboard has a good connection to the receiver.
A flashing red RF LED indicates a loss of signal
between the keypad and the receiver.

Connecting the USB Receiver

Red LED

‘off’ -- good rf connection
‘flashing’ -- no rf connection

USB receiver cable

pg 2

Caps Lock - Red LED Solid

Reset Button

Curser Speed Adjust

Press the Curser Speed adjust button and the curser speed will
change to the next speed. Available speeds High - Medium - Low

Keyboard Reset

The Keyboard can be reset to default operation in the event of
incorrect system operation. To reset the Keyboard press the reset
button for 3 seconds.

Back Light Function

Press the Back Light button to light up the keyboard.
The Back Light will automatically switch off 30 seconds
after the last keyboard stroke. You can also switch it off
manually by pressing the Back Light button.

The caps lock LED will light
solid red when in caps lock
mode.

Auto Shut Down

The keyboard will automatically shut down if no keys are pressed
within a 5 minute period.

pg 3

Using the Keyboard

The preferred way of using the MEDX2KEY for Internet Media
browsing is to hold the keyboard with both hands. Use your left thumb
to control the left/right mouse buttons and your right thumb to control
the trackball and the arrow buttons.

ESC: RETURN
SPACE: PLAY
ENTER: SELECT(ENTER)
'0': 0
'1': 1
'2': 2
'3': 3
'4': 4
'5': 5
'6': 6
'7': 7
'8': 8
'9': 9
'-': VOL_DOWN
'+': VOL_UP
'P': SHIFT + ‘P’ = POWER OFF
'R(r)': REPEAT
'T(t)': SUBTITLE
'I(i)': INFO
'A(a)': AUDIO
'G(g)': GOTO
'H(h)': HOME
'Z(z)': ZOOM - Media Library
'Ctrl': ZOOM - Internet Browser/YouTube
',(<)': FRWD
'.(>)': FFWD
'/(?)': Info / About

'F(f)': Favourite
'E(e)': EDIT
'M(m)': MENU
'S(s)': Setup
'V(v)': View
'L(l)': AB
'\(|)': SLOW
'’(”)': STOP
'/(?)': Info / About
'[({)': Back Skip
'](})': Forward Skip
'B(b)': Browser - Devices
'Alt': Mute
'FI': Red button
'F2': Green button
'F3': Yellow button
'F4': Blue button
'F5': TV Sys
'F6': Previous Chapter
'F7': Next Chapter

Keyboard Commands

pg 4

Warranty

Mede8er products carry a 24 month from date of purchase warranty. In the
event of warranty service please provide proof of purchase. Return your
product to the store that it was purchased from or return it directly to Sanji
Electronics (Pty) Ltd 106, 16th Rd Midrand, Gauteng, South Africa.

Warranty does not cover damage by
a) Lightning or over voltage

b) Water damage or liquid spill
c) Misuse or abuse
d) User tampering

Sanji Electronics is not responsible for any loss of data irrespective of the
cause.

Important Safety Instructions

·Read these instructions for all components before using this product.

·Do not use this apparatus near water or moisture. Do not use this product near
a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a
swimming pool, or anywhere else that water or moisture are present.

·Clean only with a soft dry cloth and as directed by the manufacturer.

·Do not use near any heat sources, such as radiators, heat registers, stoves or
other apparatus that produce heat.

·Only use attachments or accessories specified by the manufacturer.

·Unplug this apparatus during lightning storms or when unused for long periods
of time to prevent damage to this product.

Refer all servicing to qualified service personnel

pg 5