Medal Sports SH25405 User Manual [es, en]

Please contact us before returning the product to the store.
Toll Free: 877-852-8164
Por favor póngase en contacto con nosotros antes de devolver el producto a la tienda.
Número telefónico gratis: 877-852-8164
INSTRUCCIONES DE ARMADO
MODEL/MODELO: 25405
Sears/Kmart USA
LIMITED 90 DAYS WARRANTY
This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited warranty period, a part is found to be defec­tive or breaks, we will offer replacement part at no cost to you, the customer. The only exceptions to the warranty include main frames, table tops, playing surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental damage or neglect.
This Limited Warranty gives you specific legal rights and you may also have other rights which vary from one State (province) to another.
“PLEASE SAVE THESE INSTRUCTIONS
AND PURCHASE RECEIPT!”
A PURCHASE RECEIPT (or other proof of purchase date) will be required before any warranty service is initiated. All requests for warranty service, please feel free to contact our Consumer Service Department at :
TOLL FREE: 877-852-8164
WEBSITE: www.themdsports.com
*Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Medal Sports, can not handle the product which is out of product’s limited warranty since we only provide available parts.
*Please note that all damaged table tops/playing surfaces need to be returned to the store.
PLEASE CONTACT US BEFORE RETURNING
THE PRODUCT TO THE STORE.
Attention: Since you build all tables upside down, please inspect table tops or
playing surfaces right away before putting together.
THANK YOU VERY MUCH!
IMPORTANT NOTICE! Please contact us before returning the product to the store.
Please Keep Your Instructions! Your Model number is necessary should you need to contact us. Please read through this instruction manual book to familiarize yourself with all parts and assembly steps. Kindly refer to the parts list below and be sure that all parts have been included. Although we are dedicated to giving our customers the best product possible, a question may arise or parts may be missing. If you are missing parts, or, if you have any questions, please
contact our fast and friendly service centre on:
877-852-8164
Power Tools
- Set Low Torque
TOOLS REQUIRED:
Phillips Screwdriver - Not Included Standard (Flat Head Screwdriver) - Not Included Allen Wrench - Included
Electric Screwdrivers may be helpful during
CAUTION !
assembly; however, please set a low torque and use extreme caution.
High Torque over tightened
ASSEMBLY TIPS:
1 - Please read the instructions carefully, and follow all assembly, operation or safety instructions
properly in order to avoid damage or injury. For the assembly, at least two adults are required.
2 - Some figures or drawings may not look exactly like your product. Please read and understand
the text before beginning each assembly step.
NOTICE!
1 - This product is intended for INDOOR use only. 2 - Please Do Not sit, climb or lean on the game table. 3 - Please Do Not drag the table when moving it in order to avoid the damaged on the legs. 4 - Please only use spray furniture polish to clean the exterior surfaces on the game table. 5 - This is not a child's toy, adult supervision is required for children playing this game.
!
!
WARNING: WARNING:
 
Adult Assembly Required.
25405 PARTS LIST
1 2 3 4 5
End Apron
2 Pieces
Goal End Board
2 Pieces
Top Slat Board
2 Pieces
Side Apron
2 Pieces
6 7 8 9 10
Playfield
1 Piece
Left Leg
2 Pieces
Right Leg
2 Pieces
Support Brace
2 Pieces
11 12 13 14 15
4 x 10mm
Round Head Screw
64 Pieces
4 x 34mm
Round Head Screw
4 Pieces
3 x 20mm
Washer Head Screw
18 Pieces
5/16” x 1” Bolt
16 Pieces
16 17 18 19 20
4 x 45mm
Flat Head Screw
4 Pieces
3 x 30mm
Washer Head Screw
8 Pieces
4 x 40mm
Flat Head Screw
12 Pieces
5-Hole Rod
2 Pieces
21 22 23 24 25
Goal Box
2 Pieces
Pre-installed
Goal Cover
2 Pieces
4 x 28mm Bolt
26 Pieces
2-Hole Rod
2 Pieces
3-Hole Rod
4 Pieces
Player - Black
13 Pieces
26 27 28 29 30
Handle
8 Pieces
Rod End Cap
8 Pieces
Player - Ivory
13 Pieces
Pre-installed
Plastic Ball Entry Rim
2 Pieces
5/16” Washer
16 Pieces
Scorer
2 Pieces
31 32 33 34 35
Leg Leveler
4 Pieces
Pre-installed
36 37 38 39
Square Nut with Screws
4 Pieces
Rod Bumper
16 Pieces
Pre-installed
Plastic Rod Bushing
16 Pieces
Rod Washer
16 Pieces
Pre-installed
Ball Return Cover
2 Pieces
Allen Key
1 Piece
Pre-installed
T - Nut
16 Pieces
4mm Nut
26 Pieces
“L” Bracket
16 Pieces
Soccer Ball
2 Pieces
ASSEMBLY INSTRUCTIONS
1. Find a clean, level place to begin the assembly of your Soccer Table. The table will be assembled upside down and then turned over on its legs once the assembly completed. This game table is heavy, and turning it over will require at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list. Care­fully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
FIG.1
3. Attach one Goal End Board (#2) to one Top Slat Board (#3) using three “L” Brackets (#30) and twelve Screws
(#11) as shown in FIG.1.
4. Repeat the step above for the other Goal End Board (#2) and Top Slat Board (#3).
FIG. 1
11
30
FIG.2
5. Attach the pre-assembled Goal End Boards and Top Slat Boards (#2 & #3) to the Side Aprons (#4) using eight
Screws (#17).
FIG. 2
37
17
FIG.3
6. Place the Playfield (#6) in the center of the cabinet. Attach it to the Side Aprons (#4) using ten Screws (#13) and
attach it to the Goal End Boards (#2) using eight Screws (#13).
FIG. 3
13
FIG.4
7. Attach the “L” Brackets (#30) to the End Aprons (#1) using two Screws (#11) per Bracket as shown in FIG.4A.
8. Attach the End Aprons (#1) to the Side Aprons (#4) using six Screws (#18) per End Apron, and then attach the
“L” Brackets (#30) to the Top Slat Boards (#3) using two Screws (#11) per Bracket. See FIG.4.
FIG. 4
18
FIG. 4A
30
11
11
30
Loading...
+ 11 hidden pages