Please contact us before returning the product to the store.
Toll Free: 877-472-4296
Por favor póngase en contacto con nosotros antes de
devolver el producto a la tienda.
Número telefónico gratis: 877-472-4296
LIMITED 90 DAYS WARRANTY
This product is covered by a limited warranty that is effective for 90 days from the
date of purchase. If, during the limited warranty period, a part is found to be defective or breaks, we will offer replacement part at no cost to you, the customer. The
only exceptions to the warranty include main frames, table tops, playing surfaces,
batteries or tools.
The above warranty will not apply in cases of damages due to improper usage,
alteration, misuse, abuse, accidental damage or neglect.
This Limited Warranty gives you specific legal rights and you may also have other
rights which vary from one State (province) to another.
“PLEASE SAVE THESE INSTRUCTIONS
AND PURCHASE RECEIPT!”
A PURCHASE RECEIPT (or other proof of purchase date) will be required before
any warranty service is initiated. All requests for warranty service, please feel free
to contact our Consumer Service Department at :
TOLL FREE: 877-472-4296
WEBSITE: www.themdsports.com
*Please be aware of your product’s Limited Warranty for the return/refund policy
from the store, We, at Medal Sports, can not handle the product which is out of
product’s limited warranty since we only provide available parts.
*Please note that all damaged table tops/playing surfaces need to be returned to
the store.
PLEASE CONTACT US BEFORE RETURNING
THE PRODUCT TO THE STORE.
Attention: Since you build all tables upside down, please inspect table tops or
playing surfaces right away before putting together.
THANK YOU VERY MUCH!
1
IMPORTANT NOTICE! Please contact us before returning the product to the store.
Please Keep Your Instructions! Your Model number is necessary should you need to contact
us. Please read through this instruction manual book to familiarize yourself with all parts and
assembly steps. Kindly refer to the parts list below and be sure that all parts have been
included.
Although we are dedicated to giving our customers the best product possible, a question may
arise or parts may be missing. If you are missing parts, or, if you have any questions, please
contact our fast and friendly service centre on:
877-472-4296
Power Tools
- Set Low Torque
TOOLS REQUIRED:
Phillips Screwdriver - Not Included
Standard (Flat Head Screwdriver) - Not Included
Allen Key - Included
Electric Screwdrivers may be helpful during
CAUTION !
assembly; however, please set a low torque
and use extreme caution.
High Torque
over tightened
ASSEMBLY TIPS:
1 - Please read the instructions carefully, and follow all assembly, operation or safety instructions
properly in order to avoid damage or injury. For the assembly, at least two adults are required.
2 - Some figures or drawings may not look exactly like your product. Please read and understand
the text before beginning each assembly step.
NOTICE!
1 - This product is intended for INDOOR use only.
2 - Please Do Not sit, climb or lean on the game table.
3 - Please Do Not drag the table when moving it in order to avoid the damaged on the legs.
4 - Please only use spray furniture polish to clean the exterior surfaces on the game table.
5 - This is not a child's toy, adult supervision is required for children playing this game.
1. Find a clean, level place to begin the assembly of your Combo Table. The table will be assembled upside
down and then turned over on its legs once the assembly completed. This game table is heavy, and turning it
over will require at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list
page. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work
surface.
FIG.1
3. Attach the Side Pockets (#14) to the Billiard Frame (#1) using four Screws (#38) per Side Pocket.
4. Attach the Corner Pockets (#13) to the Billiard Frame (#1) using two Screws (#38) per Corner Pocket.
FIG. 1
13
38
14
1
FIG.2
5. Attach the Plastic Leg Bases (#15) to the bottom of the Legs
(#4) using two Plastic Screws (#16) per Leg Base.
6. Next, screw the Leg Levelers (#19) into the Leg Bases (#15).
FIG. 2
16
19
16
15
4
42
4
FIG.3
7. Attach the Legs (pre-assembled) to the Billiard Frame (#1) using four Bolts (#35) per Leg.
FIG. 3
4
4
4
4
1
35
35
FIG.4
8. Lift the table assembly from the floor with two strong adults, turn it over, and set table on its legs in the
location where you play. Go back and make sure that all connections are tight.
9. Attach the Corner Pocket Caps (#11) and the Side Pocket Caps (#12) to the Billiard Frame (#1) using two
Screws (#34) per Pocket Cap.
FIG. 4
34
11
34
12
CAUTION: Two strong adults are recommended to turn the table over as shown.
1. Lift the table off the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.
5
HOLD TABLE
CABINET
DO NOT
HOLD THE
LEGS
DO NOT LEAN THE
TABLE ON ITS LEGS!
Loading...
+ 13 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.