Medal Sports 42112 User Manual [es, en]
MODEL/MODELO: 42112
INSTRUCCIONES DE ARMADO
Please contact us before returning the product to the store.
Toll Free: 877-472-4296
Por favor póngase en contacto con nosotros antes de
devolver el producto a la tienda.
Número telefónico gratis: 877-472-4296
LIMITED 90 DAYS WARRANTY
This product is covered by a limited warranty that is effective for 90 days from the
date of purchase. If, during the limited warranty period, a part is found to be defective or breaks, we will offer replacement part at no cost to you, the customer. The
only exceptions to the warranty include main frames, table tops, playing surfaces,
batteries or tools.
The above warranty will not apply in cases of damages due to improper usage,
alteration, misuse, abuse, accidental damage or neglect.
This Limited Warranty gives you specific legal rights and you may also have other
rights which vary from one State (province) to another.
“PLEASE SAVE THESE INSTRUCTIONS
AND PURCHASE RECEIPT!”
A PURCHASE RECEIPT (or other proof of purchase date) will be required before
any warranty service is initiated. All requests for warranty service, please feel free
to contact our Consumer Service Department at :
TOLL FREE: 877-472-4296
WEBSITE: www.themdsports.com
*Please be aware of your product’s Limited Warranty for the return/refund policy
from the store, We, at Medal Sports, can not handle the product which is out of
product’s limited warranty since we only provide available parts.
*Please note that all damaged table tops/playing surfaces need to be returned to
the store.
PLEASE CONTACT US BEFORE RETURNING
THE PRODUCT TO THE STORE.
Attention: Since you build all tables upside down, please inspect table tops or
playing surfaces right away before putting together.
THANK YOU VERY MUCH!
1
IMPORTANT NOTICE! Please contact us before returning the product to the store.
Please Keep Your Instructions! Your Model number is necessary should you need to contact
us. Please read through this instruction manual book to familiarize yourself with all parts and
assembly steps. Kindly refer to the parts list below and be sure that all parts have been
included.
Although we are dedicated to giving our customers the best product possible, a question may
arise or parts may be missing. If you are missing parts, or, if you have any questions, please
contact our fast and friendly service centre on:
877-472-4296
Power Tools
- Set Low Torque
TOOLS REQUIRED:
Phillips Screwdriver - Not Included
Standard (Flat Head Screwdriver) - Not Included
Allen Wrench - Included
Electric Screwdrivers may be helpful during
CAUTION !
assembly; however, please set a low torque
and use extreme caution.
High Torque
over tightened
ASSEMBLY TIPS:
1 - Please read the instructions carefully, and follow all assembly, operation or safety instructions
properly in order to avoid damage or injury. For the assembly, at least four adults are required.
2 - Some figures or drawings may not look exactly like your product. Please read and understand
the text before beginning each assembly step.
NOTICE!
1 - This product is intended for INDOOR use only.
2 - Please Do Not sit, climb or lean on the game table.
3 - Please Do Not drag the table when moving it in order to avoid the damaged on the legs.
4 - Please only use spray furniture polish to clean the exterior surfaces on the game table.
5 - This is not a child's toy, adult supervision is required for children playing this game.
!
!
WARNING:
WARNING:
CHOKING HAZARD -- This item contains small parts or / and small balls. Not
suitable for children under 3 years.
Adult Assembly Required.
2
42112 PARTS LIST
1 2 3 4 5
Table Surface-A
1 Piece
Table Surface-B
1 Piece
Curved Leg
4 Pieces
Caster Frame
2 Pieces
6 7 8 9 10
Bottom Support Tube
2 Pieces
Linkage Tube - B
4 Pieces
End Apron
2 Pieces
Side Apron
4 Pieces
11 12 13 14 15
M6x78mm Bolt
4 Pieces
6mm Washer
68 Pieces
Spacer
8 Pieces
6mm Nut
34 Pieces
16 17 18 19 20
Linkage Tube - A
2 Pieces
Plastic Corner
4 Pieces
M6x50mm Bolt
8 Pieces
M6x52mm Bolt
4 Pieces
21 22
Gravity Lock
2 Pieces
26
31
10mm Nut
4 Pieces
Pre-installed
27
32
M6x60mm Bolt
4 Pieces
“T” Washer
2 pieces
Table Tennis Paddle
2 pieces
Pre-installed
Allen Key
1 Piece
23
Caster with Lock
4 pieces
28
Table Tennis Ball
2 Pieces
Pre-installed
33
M6x30mm Bolt
14 Pieces
24 25
Net
1 Piece
29 30
Wrench
1 Piece
Pre-installed
34
M5x12mm Screw
44 Pieces
Net Post
2 Pieces
Pre-installed
Safety Strap-Long
1 Piece
Safety Strap-Short
2 Pieces
Curved Leg Cap-A
4 Pieces
Curved Leg Cap-B
4 Pieces
3
Linkage Tube Cap
8 Pieces
ASSEMBLY INSTRUCTIONS
1. Find a clean, level place to begin the assembly of your Table Tennis Table. The table will be assembled upside down
and then turned over. This is a heavy game and tuning it over will require at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list
page. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work
surface.
FIG.1
3. Attach the Curved Leg (#3) to the Table Surface - A (#1) using one Bolt (#16), two Washers (#12) and one Nut (#14)
per Leg. See FIG.1A.
4. Attach the Linkage Tube - A (#5) to the Curved Leg (#3) using four Bolts (#15), eight Washers (#12) and four Nuts
(#14) per Linkage Tube - A. See FIG.1B.
12
1
=1
14
3
12
14
15
16
2
3
5
=1
=4
=2
=24
=12
=8
=4
FIG. 1B
5
30
31
12
15
3
Player
FIG. 1
5
1
31
Player
Center
2
14
12
12
FIG. 1A
16
4
FIG.2
5. Place the Plastic Corner (#10) flush with table corner and attach using three Screws (#20) per Corner. See FIG.2A
6. Place the End Apron (#8) between the corners and flush with the table edge at the Player end of table using six
Screws (#20) per End Apron. See FIG. 2.
7. Place the Side Apron (#9) flush with table edge at the side of the table using five Screws (#20) per Side Apron.
See FIG. 2.
8. Repeat above steps for other Table Surface.
NOTE: Make sure all Aprons are inside the Plastic Corners.
10
20
8
9
=2
=4
20
=4
FIG. 2A
=44
32
10
FIG. 2
20
9
20
8
Player
33
Center
9
5
Loading...