Measurement Computing USB-601, USB-602 Quick Start Manual

USB-500/600 Series Data Loggers

Quick Start

System requirements and recommendations



PC with Pentium® II-class processor, 450 M H z (Pentium III class
processor, 650 MHz or higher recommended)

 Windows® 8/7/Vista®/XP , 32- and 64-bit versions
 Microsoft® .NET Framework 4.0 or greater (included on install CD

and download package)

 CD-ROM drive or internet connec tion
 VGA or higher resolution monitor (Super VGA recommended)
 Microsoft mouse or com patible pointing devic e (r ec om mended)
 At least 5 MB o f free storage
 Microsoft Excel® 2000 or greater (optional)

Install the USB-500/600 Series Data Logger Software

Insert the USB-500/600 Series Data Logger Software CD and follow the
instructions on the installation dialog boxes. If the CD does not start
automatically, run setup.exe from the root of the CD.

Install the USB-500/600 Series Data Logger

Connect the USB-500/600 Series device to a USB port on your computer
and follow the onscreen instructions.

Launch the USB-500/600 Series Data Logger Software

Launch the software from your Windows operating system.

325168J-01

Rev13

Securing the USB and Mounting Clips to

1

Slots for mounting bracket (one on each side)

2

Clip-on USB connector cove r (secure clip to guarantee IP67 moisture
protection)

USB-600 Series Data Loggers

USB-600 Series data loggers i nclude a clip-on cover for th e USB
connector. This cover must be fastened securely to guarantee IP67
moisture protection on the USB-601 and USB-602.

USB-600 Series data loggers ar e also shipped with a moun ting bracket
that you can either permanently attach to a surface or temporarily attach to
an iron-based surface using the integrated magnet.

To ensure IP67 moisture protection on the USB-601 and USB-602, secure
the clip-on cover on the USB connector side first (labeled
secure th e o ther side.

Make sure both the clip-on cover and the mounting bracket click securely
into the slots on each side of the log g er.

3 Mounting bracket

Measurement Computing Corporation

10 Commerce Way

Norton, Massachusetts 02766

[phone]

[e-mail]
www.mccdaq.com

*325168J-01*

HM USB-500-600-QS

USB), and then

May15