USB-500 Series
Quick Start
Syst em requirements and recommendations ............................................................................. 2
USB-501-PRO Safety Agreement ............................................................................................. 3
Installing the software ............................................................................................................... 4
Installing USB-500 Series Data Loggers .................................................................................. 5
Running the USB-500 Data Logger Application and Help ....................................................... 6
Technical support ...................................................................................................................... 7
Contents
System requirements and recommendations
System requirements and recommendations
PC with Pentium® II-class processor, 450 MHz (Pentium III class
processor, 650 MHz or higher recommended)
Windows
Microsoft
®
XP (SP2), Windows Vista®, Windows 7, 32- and 64-bit versions
®
.NET Framework 2.0 or greater (included on the CD)
CD-ROM drive
VGA or higher resolution monitor (Super VGA recommended)
Microsoft mouse or compatible pointing device (recommended)
At least 5 Mb of free storage
Microsoft Excel
Trademark and Copyright Information
Measurement Computing Corporation and the Measurement Computing logo
are either trademarks or registered trademarks of Measurement Computing
Corporation. Refer to the Copyrights & Trademarks section on
mccdaq.com/legal for more information about Measurement Computing
trademarks. Other product and company names mentioned herein are
trademarks or trade names of their respective companies.
© 2011 Measurement Computing Corporation. All rights reserved. No part of
this publication may be reproduced, stored in a retrieval system, or transmitted,
in any form by any means, electronic, mechanical, by photocopying, recording,
or otherwise without the prior written permission of Measurement Computing
Corporation.
Notice
Measurement Computing Corporation does not authorize any Measurement
Computing Corporation product for use in life support systems and/or devices
without prior written consent from Measurement Computing Corporation. Life
support devices/systems are devices or systems which, a) are intended for
surgical implantation into the body, or b) support or sustain life and whose
failure to perform can be reasonably expected to result in injury. Measurement
Computing Corporation products are not designed with the components
required, and are not subject to the testing required to ensure a level of
reliability suitable for the treatment and diagnosis of people.
®
2000 or greater (optional)
HM USB-500-QS-Ref_post.doc
Revision 14, June 2011
2
Loading...