Measurement USB-5201 User Manual

USB-500/600 Series Data Loggers

Quick Start

System requirements and recommendations



PC with Pentium® II-class processor, 450 MHz (Pentium III class
processor, 650 MHz or higher recommended)

 Windows® 8/7/Vista®/XP, 32- and 64-bit versions
 Microsoft® .NET Framework 4.0 or greater (included on install CD

and download package)

 CD-ROM drive or internet connection
 VGA or higher resolution monitor (Super VGA recommended)
 Microsoft mouse or compatible pointing device (recommended)
 At least 5 MB of free storage
 Microsoft Excel® 2000 or greater (optional)

Install the USB-500/600 Series Data Logger Software

Insert the USB-500/600 Series Data Logger Software CD and follow the
instructions on the installation dialog boxes. If the CD does not start
automatically, run setup.exe from the root of the CD.

Install the USB-500/600 Series Data Logger

Connect the USB-500/600 Series device to a USB port on your computer
and follow the onscreen instructions.

Launch the USB-500/600 Series Data Logger Software

Launch the software from your Windows operating system.

Securing the USB and Mounting Clips to USB-600 Series Data Loggers

USB-600 Series data loggers include a clip-on cover for the USB
connector. This cover must be fastened securely to gu arantee IP67
moisture protection on the USB-601 and USB-602.

USB-600 Series data loggers ar e also shipped with a mounting bracket
that you can either permanently attach t o a surface or temporarily attach to
an iron-based surface using the integrated magnet.

To ensure IP67 moisture protection on the USB-601 an d USB-602, secure
the clip-on cover on the USB connecto r side first (labeled

USB), and then

secure th e ot her side.
Make sure both the clip-on cover and the mounting bracket click securely

into the slots on each side of the logger.

1 Slots for mounting bracket (one on each side)
2 Clip-on USB connector cover (secure clip to guarantee IP67 m oisture

protection)

3 Mounting bracket

Measurement Computing Corporation

10 Commerce Way

Norton, Massachusetts 02766

Tel: [phone] Fax: [phone]

www.mccdaq.com

*325168H-01*