Page 1
15W Single Output Switching Power Supply
Features :
■
RS-15 series
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
No load power consumption<0.5W
All using 105 long life electrolytic capacitors℃
Withstand 300VAC surge input for 5 second
High operating temperature up to 70℃
Withstand 5G vibration test
High efficiency, long life and high reliability
3 years warranty
SPECIFICATION
MODEL RS-15-3.3 RS-15-12RS-15-5 RS-15-15 RS-15-24 RS-15-48
DC VO LTAG E
RATED CURRENT
CURRENT RANGE
RATED POWER
RIPPLE & NOISE (max.)
OUTPUT VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3
LINE REGULATION
LOAD REGULATION Note.5
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
PROTECTION
ENVIRONMENT
SAFETY &
EMC
(Note 6)
NOTE
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSIONOTHERS
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.230 230 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
3.3V 12V5V 15V 24V 48V
3A 1.3A3A 1A 0.625A 0.313A
0 ~ 3A 0 ~ 1.3A0 ~ 3A 0 ~ 1A 0 ~ 0.625A 0 ~ 0.313A
9.9W 15.6W15W 15W 15W 15.024W
80mVp-p 120mVp-p80mVp-p 120mVp-p 200mVp-p 200mVp-p
Note.2
2.9 ~ 3.6V 10.8 ~ 13.2V4.75 ~ 5.5V 13.5 ~ 16.5V 22 ~ 27.6V 43.2 ~ 52.8V
±3.0% ±1.0%±2.0%
Note.4
±0.5%
1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
70ms/230VAC 12ms/115VAC at full load
85 ~ 264VAC 120 ~ 370VDC
47 ~ 63Hz
72% 81%77% 81% 82% 82%
0.35A/115VAC 0.25A/230VAC
COLD START 65A / 230VAC
<2mA / 240VAC
Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.45V 13.8 ~ 16.2V5.75 ~ 6.75V 17.25 ~ 20.25V 28.4 ~ 32.4V 55.2 ~ 64.8V
Protection type : Shut off o/p voltage, clamping by zener diode
Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +70 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH℃
±℃ ℃0.03%/ (0 ~ 50 )
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, EN55024, EN61000-6-1, light industry level, criteria A
1608.8Khrs min. MIL-HDBK-217F (25 )℃
62.5*51*28mm (L*W*H)
0.13Kg; 108pcs/15Kg/0.71CUFT
±0.5%±0.5%
±0.5%±1.5%
±1.0%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%±2.0%
File Name:RS-15-SPEC 2015-07-08
Page 2
15W Single Output Switching Power Supply
RS-15 series
Mechanical Specification
Terminal Pin No. Assignment
Pin No. Pin No.
Assignment Assignment
1
2
3
AC/L
AC/N
FG
4
5
DC OUTPUT -V
DC OUTPUT +V
±
39.66 0.5
±
30.48 0.5
Case No.971A Unit:mm
1
2
3
39.1
2-M3 L=3
14.65
62.5
2-M3 L=4
±
6 0.2
+V ADJ.
13 max.
4
5
LED
51
25.25
28
15.1
Block Diagram
I/P
FG
Derating Curve
100
80
60
40
LOAD (%)
20
EMI
FILTER
RECTIFIERS
&
FILTER
POWER
SWITCHING
PWM
CONTROL
RECTIFIERS
FILTER
Output Derating VS Input Voltage
100
90
80
70
60
50
LOAD (%)
40
&
DETECTION
CIRCUIT
11.539.1
fosc : 132KHz
+V
-V
-20 0 2010 30 40
AMBIENT TEMPERATURE ( )℃
6050
70
(HORIZONTAL)
85 10095 120115 160140 200180 240220 264
INPUT VOLTAGE (VAC) 60Hz
File Name:RS-15-SPEC 2015-07-08
Loading...