MEANWELL ODLV-65A-24 Datasheet

65W PWM Output LED Driver

M M

SELV

IP67

(for enclosure design only)

IS 15885(Part 2/Sec13)

THOMAS SAMUEL

THOMAS SAMUEL

R-41027766

( for ODLV-65-12,24,48 only)

ODLV-65 series

E

S

&

Type HL

■ Features ■ Applications
Constant Voltage PWM style output

with frequency 1KHz

Plastic housing with class II design
Built-in active PFC function

LED strip lighting
Indoor LED lighting
LED decorative lighting
LED architecture lighting

No load power consumption<0.5W(Blank-Type)
IP67 rating for indoor or outdoor installations
Function options: 2 in 1 dimming (dim-to-off);

Auxiliary DC output

3 years warranty

■ Description

ODLV-65 series is a 65W AC/DC LED driver featuring the constant voltage mode PWM style
design. ODLV-65 operates from 180~295VAC and offers models with different rated voltage
ranging between 12V and 60V. Thanks to the high efficiency up to 90%, with the fanless design,
the entire series is able to operate for -20 ~+85 case temperature under free convection.℃℃
The design of plastic housing and IP67 ingress protection level allows this series to fit indoor
wet applications. ODLV-65 is equipped with various function options, such as dimming
methodologies, so as to provide the optimal design flexibility for lighting system.

■ Model Encoding

ODLV

Type

Blank

A

65

-

2 in 1 dimming (0~10VDC and 10V PWM)
2 in 1 dimming and Auxiliary DC output

A

-

12

Rated output voltage(12/24/36/48/60V)

Function options

Rated wattage

Series name

Function Note

In Stock
In Stock

File Name:ODLV-65-SPEC 2018-01-15

SPECIFICATION

65W PWM Output LED Driver

ODLV-65 series

MODEL

DC VOLTA GE

RATED CURRENT

RATED POWER

OUTPUT

INPUT

PROTECTION

ENVIRONMENT

SAFETY &

EMC

NOTE

DIMMING RANGE

VOLTAGE TOLERANCE

PWM FREQUENCY (Typ.)

SETUP TIME

AUXILIARY DC OUTPUT

VO LTAGE RA NGE Note.2

FREQUENCY RANGE

POWER FACTOR (Typ.)

TOTALHARMONIC DISTORTION

EFFICIENCY (Typ.)

AC CURRENT (Typ.)

INRUSH CURRENT(Typ.)

MAX. No. of PSUs on 16A
CIRCUIT BREAKER

LEAKAGE CURRENT

NO LOAD POWER CONSUMPTION

SHORT CIRCUIT

OVER CURRENT

WORKING TEMP.

MAX. CASE TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

SAFETY STANDARDS

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

EMC EMISSION

EMC IMMUNITY

MTBF

DIMENSIONOTHERS

PACKING

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature.℃

2. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details

3. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.

4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.

5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be

6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

ODLV-65 -12

12V

4.2A

50.4W

0~100%

±10%
1KHz( 20%)±

Note.3

affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

500ms / 230VAC

Nominal 12V(deviation 11.4~12.6)@50mA forA-Type only

Note.4

180 ~ 295VAC 254 ~ 417VDC
(Please refer to "STATIC CHARACTERISTIC" section)

47 ~ 63Hz

PF>0.95/230VAC, PF>0.9/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

THD< 20%(@load 60%/230VAC; @load 75%/277VAC)≧≧
(Please refer to “TOTAL HARMONIC DISTORTION”section)

85%

0.4A/230VAC 0.3A/277VAC

COLD START 30A(twidth= s measured at 50% Ipeak) at 230VAC270μ;Per NEMA 410

32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC

<0.75mA / 277VAC

<0.5W for Blank-Type, <1.2W for A-Type

Shut down O/P voltage, re-power on to recovery

105 ~ 115%

Protection type : Hiccup mode, recovers automatically after fault condition is removed

Tcase=-20 ~ +85 (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)℃

Tcase=+85℃

20 ~ 90% RH non-condensing

-40 ~ +80 , 10 ~ 95% RH℃
±℃ ℃0.03%/ (0 ~ 45 )

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

UL8750 ,CSA C22.2 NO.250.13-12;(type”HL”) ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14;
BIS IS15885( for ODLV-65-12,24,48 only), EAC TP TC 004,IP67 approved

I/P-O/P:3.75KVAC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH℃

Compliance to EN55015, EN61000-3-2 Class C ( ) ; EN61000-3-3,GB17743,GB17625.1,EAC TP TC 020@load 60%≧

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level( ),EAC TPTC 020surge immunity:Line-Line:1KV

398.7K hrs min. MIL-HDBK-217F (25 )℃

121*77*28.5mm (L*W*H)

0.43Kg;24pcs/11.3Kg/ 0.74CUFT

ODLV-65 -24

24V

2.4A

57.6W

87%

ODLV-65 -36

36V

1.8A

64.8W

88%

ODLV-65 -48 ODLV-65 -60

48V 60V

1.35A

64.8W

89% 90%

1.08A

64.8W

File Name:ODLV-65-SPEC 2018-01-15

65W PWM Output LED Driver

DIMMING OPERATION

AUX-(Green)
AUX+(Yellow)

Vo-(Black)
Vo+(Red)
DIM-(Gray)
DIM+(Purple)

ACN(Blue)
ACL(Brown)

※ Dimming principle for PWM style output

Dimming is achieved by varying the duty cycle of the output current.

ODLV-65 series

Output DC current

Io=0A

※ 2 in 1 dimming function
◎ Applying additive 0 ~ 10VDC

+

Vo+

-

Vo-

DIM+

DIM-

“DO NOT connect "DIM- ”to Vo-

+

-

ON

OFF

ON

T

T

Additive Voltage

ON

T

Duty cycle(%) = ×100%

T

Output PWM frequency : 1KHz ( 20%)±

100%

90%

80%

+

-

70%

60%

50%

40%

30%

20%

Duty cycle of output current (%)

10%

0%

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

Dimming input:Additive voltage

Duty cycle of output current (%)

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

0%

0%

10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Duty cycle of additive 10V PWM signal dimming input

◎ Applying additive 10V PWM signal (frequency range 300Hz~3KHz):

+

Vo+

-

Vo-

DIM+

Additive PWM signal

DIM-

“DO NOT connect "DIM- ”to Vo-

+

-

Note : 1. Min. duty cycle of output current is about 8% and the output current is not defined when 0%< out<8%.I

2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.

3. To ensure the dimming effect, total power must be over 45W at 100% duty cycle.

File Name:ODLV-65-SPEC 2018-01-15

0.7

0.75

0.8

0.85

0.9

0.95

1

50% 60% 70% 80% 90% 100%

277V

230V

0

2

4

6

8

10

12

14

16

18

50% 60% 70% 80% 90% 100%

277VAC

230VAC

65W PWM Output LED Driver

66

71

76

81

86

91

96

10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

277V

230V

OUTPUT LOAD vs TEMPERATURE

ODLV-65 series

100

80

60

40

20

LOAD (%)

-20 -10 0 5 10 20 30 45

AMBIENT TEMPERATURE,Ta ( )℃

STATIC CHARACTERISTIC

100

90

80

70

60

50

LOAD (%)

40

(HORIZONTAL)

100

80

60

40

LOAD (%)

20

-20-100 1530457585

Tcase ( )℃

POWER FACTOR (PF) CHARACTERISTIC

※ Tcase at 75℃

PF

(HORIZONTAL)

180 295

200 230 260

INPUT VOLTAGE (V)

※De-rating is needed under low input voltage.

TOTAL HARMONIC DISTORTION (THD)

※ 60V Model, Tcase at 75℃

THD

LOAD

(65W)

LOAD

EFFICIENCY vs LOAD

ODLV-65 series possess superior working efficiency that up to 90% can
be reached in field applications.

※ 60VModel, Tcase at 75℃

EFFICIENCY(%)

LOAD

File Name:ODLV-65-SPEC 2018-01-15

65W PWM Output LED Driver

ODLV-65 series

BLOCK DIAGRAM

I/P

EMI FILTER

&

RECTIFIERS

MECHANICAL SPECIFICATION

※Blank-Type:

Vo-(Black)
Vo+(Red)
DIM-(Gray)
DIM+(Purple)

ACN(Blue)
ACL(Brown)

O.L.P.

200±10

200±10

150±10

POWER

SWITCHING

PWM&PFC

CONTROL

3.5

3.5

RECTIFIERS

RECTIFIERS

&

FILTER

121

CURRENT

LIMIT

DETECTION

CIRCUIT

Case No.ODL-65A Unit:mm

30

tc

30

fosc : 70-150KHz

AUX+(for A-Type)
AUX-(for A-Type)

Vo+
Vo-

DIM+
DIM-

77

3.5

tc

 : Max. CaseTemperature

AC wire No.Assignment(AC IN) DC wire No.Assignment(DC OUT)

ACN(Blue)

ACL(Brown)

SVT 18AWG

SVT 18AWG

Vo-(Black)

Vo+(Red)

DIM-(Gray)

DIM+(Purple)

UL1007 18AWG

UL1007 18AWG

UL1007 22AWG

UL1007 22AWG

2* 4.5ψ

3.5

28.5

2.5

File Name:ODLV-65-SPEC 2018-01-15

65W PWM Output LED Driver

ODLV-65 series

※A-Type:

AUX-(Green)
AUX+(Yellow)

Vo-(Black)
Vo+(Red)
DIM-(Gray)
DIM+(Purple)

ACN(Blue)
ACL(Brown)

200±10

150±10

150±10

200±10

AC wire No.Assignment(AC IN)

ACN(Blue)

ACL(Brown)

SVT 18AWG

SVT 18AWG

121

3.5

3.5

tc

 : Max. CaseTemperature

DC wire No.Assignment(DC OUT)

AUX-(Green)

AUX+(Yellow)

Vo-(Black)

Vo+(Red)

DIM-(Gray)

DIM+(Purple)

UL1007 22AWG

UL1007 22AWG

UL1007 18AWG

UL1007 18AWG

UL1007 22AWG

UL1007 22AWG

30

2* 4.5ψ

30

tc

77

3.5

3.5

28.5

2.5

Recommend Mounting Direction

Installation Manual

Please refer to : http://www.meanwell.com/manual.html

File Name:ODLV-65-SPEC 2018-01-15