MEANWELL ODLV-45A-12 Datasheet

Download

Page 1

45W PWM Output LED Driver

SELV

IP67

(for enclosure design only)

IS 15885(Part 2/Sec13)

THOMAS SAMUEL

R-41027766

( for ODLV-45-12,24,48 only)

ODLV-45 series

Type HL

■ Features

Constant Voltage PWM style output

with frequency 1KHz

Plastic housing with class II design Built-in active PFC function

■ Applications

LED strip lighting Indoor LED lighting LED decorative lighting LED architecture lighting

No load power consumption<0.5W(Blank-Type) IP67 rating for indoor or outdoor installations Function options: 2 in 1 dimming (dim-to-off);

Auxiliary DC output

3 years warranty

■ Description

ODLV-45 series is a 45W AC/DC LED driver featuring the constant voltage mode PWM style output design. ODLV-45 operates from 90~295VAC and offers models with different rated voltage ranging between 12V and 60V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -20 ~+85 case temperature under free air convection. The design of℃℃ plastic housing and IP67 ingress protection level allows this series to fit indoor wet applications. ODLV-45 is equipped with various function options, such as dimming methodologies, so as to provide the design flexibility for LED lighting system.

■ Model Encoding

ODLV

Type

Blank

2 in 1 dimming (0~10VDC and 10V PWM) 2 in 1 dimming

Rated output voltage(12/24/36/48/60V)

Function options

Rated wattage

Series name

Function Note

and Auxiliary DC output

In Stock In Stock

File Name:ODLV-45-SPEC 2018-01-15

Page 2

SPECIFICATION

MODEL

DC VOLTA GE

RATED CURRENT

RATED POWER

OUTPUT

INPUT

PROTECTION

ENVIRONMENT

SAFETY &

EMC

NOTE

DIMMING RANGE

VOLTAGE TOLERANCE

PWM FREQUENCY (Typ.)

SETUP TIME

AUXILIARY DC OUTPUT

VO LTAGE RA NGE Note.2

FREQUENCY RANGE

POWER FACTOR (Typ.)

TOTALHARMONIC DISTORTION

EFFICIENCY (Typ.)

AC CURRENT (Typ.)

INRUSH CURRENT(Typ.)

MAX. No. of PSUs on 16A CIRCUIT BREAKER

LEAKAGE CURRENT

NO LOAD POWER CONSUMPTION

SHORT CIRCUIT

OVER CURRENT

WORKING TEMP.

MAX. CASE TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

SAFETY STANDARDS

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

EMC EMISSION

EMC IMMUNITY

MTBF

DIMENSIONOTHERS

PACKING

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature.℃

2. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details

3. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.

4. Aux. 12V will be damaged with short circuit; It will not be available with dimming off or output no load condition.

5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

45W PWM Output LED Driver

ODLV-45 -12

12V

3.0A

36W

0~100%

±10%

1KHz( 20%)±

Note.3

500ms / 230VAC 1200ms/115VAC

Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only

Note.4

90 ~ 295VAC 127 ~ 417VDC (Please refer to "STATIC CHARACTERISTIC" section)

47 ~ 63Hz

PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

THD< 20%(@load 60%/115VAC,230VAC; @load 75%/277VAC)≧≧ (Please refer to “TOTALHARMONIC DISTORTION” section)

84%

0.6A / 115VAC 0.4A / 230VAC 0.3A / 277VAC

COLD START 30A(twidth= s measured at 50% Ipeak) at 230VAC150μ;Per NEMA 410

32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC

<0.75mA / 277VAC

<0.5W for Blank-Type, <1.2W forA-Type

Shut down O/P voltage, re-power on to recovery

105 ~ 115%

Protection type : Hiccup mode, recovers automatically after fault condition is removed

Tcase=-20 ~ +85 (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)℃

Tcase=+85℃

20 ~ 90% RH non-condensing

-40 ~ +80 , 10 ~ 95% RH℃

±℃ ℃0.03%/ (0 ~ 50 )

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

UL8750 ,CSA C22.2 NO.250.13-12;(type”HL”) ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14;

BIS IS15885( for ODLV-45-12,24,48 only), EAC TPTC 004,IP67 approved

I/P-O/P:3.75KVAC

I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH℃

Compliance to EN55015, EN61000-3-2 Class C ( ) ; EN61000-3-3,GB17743,GB17625.1,EAC TP TC 020@load 60%≧

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level( ),EAC TPTC 020surge immunity:Line-Line:1KV

388.02K hrs min. MIL-HDBK-217F (25 )℃

111*77*28.5mm (L*W*H)

0.42Kg;24pcs/11Kg/ 0.72CUFT

ODLV-45 -24

24V

1.88A

45.12W

86%

ODLV-45 -36

36V

1.25A

45W

88%

ODLV-45 series

ODLV-45 -48 ODLV-45 -60

48V 60V

0.94A

45.12W

88% 90%

0.75A

45W

File Name:ODLV-45-SPEC 2018-01-15

Page 3

45W PWM Output LED Driver

DIMMING OPERATION

AUX-(Green) AUX+(Yellow)

V -(Black)

V +(Red)

DIM-(Gray) DIM+(Purple)

ACN(Blue) ACL(Brown)

※ Dimming principle for PWM style output

Dimming is achieved by varying the duty cycle of the output current.

ODLV-45 series

Output DC current

Io=0A

※ 2 in 1 dimming function

◎ Applying additive 0 ~ 10VDC

Vo+

Vo-

DIM+

DIM-

“DO NOT connect "DIM- ”to Vo-

Additive Voltage

OFF

Duty cycle(%) = ×100%

TON

Output PWM frequency : 1KHz( 20%)±

100%

90%

80%

70%

60%

50%

40%

30%

20%

Duty cycle of output current (%)

10%

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

Dimming input:Additive voltage

Duty cycle of output current (%)

100%

90%

80%

70%

60%

50%

40%

30%

20%

10%

10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Duty cycle of additive 10V PWM signal dimming input

◎ Applying additive 10V PWM signal (frequency range 300~3000Hz):

Vo+

Vo-

DIM+

Additive PWM signal

DIM-

“DO NOT connect "DIM- ”to Vo-

Note : 1. Min. duty cycle of output current is about 8% and the output current is not defined when 0%< out<8%.I

2. The duty cycle of output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.

File Name:ODLV-45-SPEC 2018-01-15

Page 4

5.00%

7.00%

9.00%

11.00%

13.00%

15.00%

17.00%

19.00%

50% 60% 70% 80% 90% 100%

277(45W)

230(45W)

115(36W)

85%

86%

87%

88%

89%

90%

91%

50% 60% 70% 80% 90% 100%

277(45W)

230(45W)

115(36W)

0.75

0.80

0.85

0.90

0.95

1.00

50% 60% 70% 80% 90% 100%

277(45W)

230(45W)

115(36W)

45W PWM Output LED Driver

OUTPUT LOAD vs TEMPERATURE

ODLV-45 series

100

LOAD (%)

-20 -10 0 10 20 30 40

AMBIENT TEMPERATURE,Ta ( )℃

STATIC CHARACTERISTIC

100

LOAD (%)

for 12V model

for others

100

LOAD (%)

(HORIZONTAL)

-20-100 1530456085

(HORIZONTAL)

Tcase ( )℃

POWER FACTOR (PF) CHARACTERISTIC

※ Tcase at 75℃

90 295

100

135 180 200

INPUT VOLTAGE (V)

※De-rating is needed under low input voltage.

TOTAL HARMONIC DISTORTION (THD)

※ 60V Model,Tcase at 75℃

THD(%)

LOAD

230

LOAD

EFFICIENCY vs LOAD

ODLV-45 series possess superior working efficiency that up to 90% can be reached in field applications.

60V Model,Tcase at 75

EFFICIENCY(%)

LOAD

File Name:ODLV-45-SPEC 2018-01-15

Page 5

45W PWM Output LED Driver

BLOCK DIAGRAM

ODLV-45 series

fosc : 70~150KHz

I/P

EMI FILTER

RECTIFIERS

O.L.P.

POWER

SWITCHING

DRIVING METHODS OF LED MODULE

※ This series work in Constant Voltage mode to drive the LEDs.

100

(B)

Constant

Current area

Vo(%)

(min.)

(A)

Constant

V areaoltage

(C)

Hiccup

Protection

PWM&PFC

CONTROL

RECTIFIERS

FILTER

CURRENT

LIMIT

DETECTION

CIRCUIT

AUX+(for A-Type) AUX-(for A-Type)

Vo+ Vo-

DIM+ DIM-

In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems.

Should there be any compatibility issues, please contact MEAN WELL.

100

Io(%)

Typical output current normalized by rated current (%)

File Name:ODLV-45-SPEC 2018-01-15

Page 6

45W PWM Output LED Driver

ODLV-45 series

MECHANICAL SPECIFICATION

※Blank-Type:

Vo-(Black) Vo+(Red) DIM-(Gray) DIM+(Purple)

ACN(Blue) ACL(Brown)

AC wire No.Assignment(AC IN) DC wire No.Assignment(DC OUT)

ACN(Blue)

ACL(Brown)

200±10

150±10

200±10

SVT 18AWG

3.5

 : Max. Case Temperature

Vo-(Black)

Vo+(Red)

DIM-(Gray)

DIM+(Purple)

111

UL1007 18AWG

UL1007 22AWG

Case No.ODL-45A Unit:mm

2* 4.5ψ

3.5

28.5

2.5

※A-Type:

200±10

AUX-(Green) AUX+(Yellow)

Vo-(Black) Vo+(Red) DIM-(Gray) DIM+(Purple)

ACN(Blue) ACL(Brown)

AC wire No.Assignment(AC IN) DC wire No.Assignment(DC OUT)

ACN(Blue)

ACL(Brown)

150±10

200±10

SVT 18AWG

INSTALLATION MANUAL

Please refer to : http://www.meanwell.com/manual.html

3.5

 : Max. Case Temperature

AUX-(Green)

AUX+(Yellow)

Vo-(Black)

Vo+(Red)

DIM-(Gray)

DIM+(Purple)

111

UL1007 22AWG

UL1007 18AWG

UL1007 22AWG

2* 4.5ψ

3.5

28.5

2.5

File Name:ODLV-45-SPEC 2018-01-15

MEANWELL ODLV-45A-12 Datasheet

Specifications and Main Features

Frequently Asked Questions

User Manual