Page 1
60W DIN RUltra Slim Step Shape ail
tgepruft
Bauar
Sicherheit
egel gema
od
os
be
wac g
www.
tuv.com
UL508
UL62368 1-
■ Features
Ultra slim design with 52.5mm(3SU width)
Universal input 85 264VAC 277VAC operational ~ ( )
No load power consumption<0.3W
Isolation class Ⅱ
Pass LPS (Limited power source)
DC output voltage adjustable
Protections : Short circuit / Overload Over voltage/
Cooling by free air convection (working temperature:-30~+70 C°)
DIN rail TS 35 7 5 or 15 mountable-/.
Over voltage category Ⅲ
LED indicator for power on
3 years warranty
ID 2000000000
EN61558
R33100
RoHS
TPTC004
AS/NZS60950-1
IEC62368-1
HDR-60 series
■ Applications
Household control system
Building automation
Industrial control system
Factory automation
Electro-mechanical apparatus
■ Description
HDR-60 is one economical ultra slim 60W D rail power supply series, adapt to be installed on TS-35/7.5 IN
or TS-35/15 mounting rails. The body is designed 52.5mm( ) in width, which allows space saving inside the 3SU
cabinets. The entire series adopts the full range AC input from 85VAC to 2 VAC ( and 64 277VAC operational)
conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.
HDR-60 is designed with plastic housing that it can effectively prevent user from electric hazards. With working
efficiency up to 91%, the entire series can operate at the ambient temperature between -30 and 70 under
air convection. The complete protection functions and relevant certificates for home automations and industrial
control apparatus ( - ,UL508,UL6 -1,EN61558-2-16) make HDR-60 a very competitive power supply solution IEC62368 1 2368
for household and industrial applications.
■ Model Encoding
-12HDR - 60
Output voltage
Rated wattage
Series name
File Name:HDR-60-SPEC 2019-12-04
Page 2
60W DIN RUltra Slim Step Shape ail
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
RIPPLE & NOISE (max.)
OUTPUT VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
PROTECTION
ENVIRONMENT
SAFETY &
EMC
(Note )
NOTE
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
OVERLOAD
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
OPERATINGALTITUDE
OVER VOLTAGE CATEGORY
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
4
EMC IMMUNITY
MTBF
DIMENSIONOTHERS
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 f & 47 f parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4 The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC
.
directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
5. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
HDR-60 series
HDR-60-5
5V
6 5. A
0 ~ A.
65
32 5W.
80mVp-p
Note.2
5 0 5 5. ~ . V
±
2.0%
±
1.0%
±
1.0%
500ms, 50ms/230VAC 500ms, 50ms/115VAC at full load
30ms/230VAC 12ms/115VAC at full load
85 ~ 2 VAC ( ) 120 ~ 3 VDC ( )64 277VAC operational 70 390VDC operational
47 ~ 63Hz
8 %5
1.2A/115VAC 0.8A/230VAC
COLD START 30A/115VAC 0A/230VAC6
105 ~ 160% rated output power
H , recovers automatically after fault condition is removediccup mode when output voltage 50<%
Constant current limiting recovers automatically after fault condition is removed within 50% ~100% rated output voltage,
5 75 6 75. ~ . V
Protection type : Shut down o/p voltage, re-power on to recover
-30 ~ +70 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% -℃ R
±
0.03%/ (0 ~ 50 ) -℃℃R
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
2000 meters
According to E 61558, EN50178,EN60664-1, EN62477-1 altitude up to 2000Ⅲ;;N meters
UL62368-1, UL508, TUV EN61558-2-16, IEC62368-1, , BSMI CNS14336-1 aEAC TP TC 004 pproved; Design refer to EN62368-1
I/P-O/P: KVAC4
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH℃
Parameter
Conducted
Radiated
Harmonic Current
Voltage Flicker
EN55024, EN55035, EN61000-6-2, EN61204-3
Parameter
ESD
Radiated Susceptibility
EFT/Burest
Surge
Conducted
Magnetic Field
Voltage Dips and interruptions
927 6K hrs min. MIL-HDBK-217F (25. ℃)
45
52.5*90*5 . mm (W*H*D)
190g;60pcs/12.4Kg/0.97CUFT
HDR-60-12 HDR-60-15 HDR-60-24
12V 15V 24V
4.5A 4A 2.5A
0 ~ 4.5A 0 ~ 4A 0 ~ 2.5A
54W 60W 60W
120mVp-p 120mVp-p
10.8 ~ 1 . V3 8
±
1.0%
±
1.0%
±
1.0%
88% 89% 90%
14 2 6 2. ~ 1 . V 18.8 ~ 22.5V 30 ~ 36V
H non condensing
H non condensing
Standard
EN55032(CISPR32), CNS13438
EN55032(CISPR32), CNS13438
EN61000-3-2
EN61000-3-3
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
13.5 ~ 18V
±
1.0%
±
1.0%
±
1.0%
150mVp-p
21.6 ~ 29V
±
1.0%
±
1.0%
±
1.0%
Test Level / Note
Class B
Class B
Class A
-------
Test Level /Note
Level 3, 8KV air; Level 2, 4KV contact, criteria A
Level 3, criteriaA
Level 3, criteriaA
Level 4,2KV/L-N, criteriaA
Level 3, criteriaA
Level 4, criteriaA
＞.95% dip 0 5 periods, 30% dip 25 periods,
95% interruptions 250 periods＞
μμ
HDR-60-48
48V
1.25A
0 ~ 1.25A
60W
240mVp-p
43.2 ~ 55.2V
±
1.0%
±
1.0%
±
1.0%
91%
5 . ~ 6 . V6 5 4 8
File Name:HDR-60-SPEC 2019-12-04
Page 3
Block Diagram
60W DIN RUltra Slim Step Shape ail
HDR-60 series
I/P
EMI
FILTER
RECTIFIERS
&
FILTER
POWER
SWITCHING
RECTIFIERS
&
FILTER
DETECTION
CIRCUIT
O.L.P.
PWM
CONTROL
O.V.P.
Derating Curve Output Derating VS Input Voltage
100
80
100
90
80
+V
-V
60
50
40
LOAD (%)
20
-30 0 10 20 30 40 50 60 70 (VERTICAL)
AMBIENT TEMPERATURE ( )
70
60
50
LOAD (%)
40
85 10095 120115 160140 200180 240220
INPUT VOLTAGE (VAC) 60Hz
277
264
(operational)
File Name:HDR-60-SPEC 2019-12-04
Page 4
60W DIN RUltra Slim Step Shape ail
Mechanical Specification
(Unit: mm , tolerance ± 0.5mm)
HDR-60 series
58.4
52.5
12534
6
5.54
90
6.3 65
45.15
35
ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15
Terminal Pin No. Assignment
Pin No.
1,2
3,4
Assignment
-V
+V
Pin No.
5
6
Assignment
AC/L
AC/N
Installation Manual
Please refer to : http://www.meanwell.com/manual.html
File Name:HDR-60-SPEC 2019-12-04
Loading...