Page 1
UL61010
150 Ultra Slim Step ShapeW DIN Rail
tgepruft
Bauar
Sicherheit
egel gema
od
os
be
wac g
www.
tuv.com
UL62368-1
ID 2000000000
EN61558
TPTC004
IEC62368-1
HDR-150 series
■ Features
Ultra slim design with 105mm(6SU width)
Universal input 85 264VAC 277VAC operational ~ ( )
No load power consumption<0.3W
Isolation class Ⅱ
DC output voltage adjustable
■ Applications
Household control system
Building automation
Industrial control system
Factory automation
Electro-mechanical apparatus
Protections : Short circuit / Overload Over voltage/
Cooling by free air convection
DIN rail TS 35 7 5 or 15 mountable-/.
Over voltage category Ⅲ
LED indicator for power on
3 years warranty
■ Description
HDR-150 is an economical ultra slim 150W DIN rail power supply series, adapt to be installed on TS-35/7.5
or TS-35/15 mounting rails. The body is designed 105mm(6SU) in width, which allows space saving inside the
cabinets. The entire series adopts the full range AC input from 85VAC to 264VAC(277VAC
operational) and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.
HDR-150 is designed with plastic housing that it can effectively prevent user from electric hazards. With
working efficiency up to 90.5%, the entire series can operate at the ambient temperature between
-30 and 70 under air convection. The complete protection functions and relevant certificates for home ℃℃
automations and industrial control apparatus UL62368-1,UL61010, EN61558-2-16) make HDR-150 a ve ry (-,IEC62368 1
competitive power supply solution for household and industrial applications.
■ Model Encoding
-12HDR - 1 05
Output voltage
Rated wattage
Series name
File Name:HDR- 0-SPEC15 2019-06-26
Page 2
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
RATED POWER
RIPPLE & NOISE (max.)
OUTPUT
INPUT
PROTECTION
ENVIRONMENT
SAFETY &
EMC
()
Note 7.
NOTE
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
OVERLOAD
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
OPERATINGALTITUDE
OVER VOLTAGE CATEGORY
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSIONOTHERS
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 f & 47 f parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
5. When the input voltage is 230VAC,delivers EMI Class B for radiated emission for the power supply; When the input voltage is 110VAC, delivers EMI Class A for
radiated emission for the power supply.
6. Harmonic current test at 70% load .
7. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC
directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
150 Ultra Slim Step ShapeW DIN Rail
HDR-1 0-125
12V
115VAC
10.2A
230VAC
11 3.A
115VAC
122.4W
230VAC
135 6.W
Note.2
1 0mVp-p0
180 8~ 1 V..3
±2.0%
Note.3
±1.0%
±1.0%
500ms, 0ms/230VAC 500ms, 0ms/115VAC at full load66
30ms/230VAC 12ms/115VAC at full load
85 ~ 2 VAC ( ) 120 ~ 3 VDC ( )64 277VAC operational 70 390VDC operational
47 ~ 63Hz
8%9
3A/115VAC 1.6A/230VAC
COLD START 3 A/115VAC 0A/230VAC57
10 ~ % rated output power5 135
H , recovers automatically after fault condition is removediccup mode when output voltage 50<%
Constant current limiting recovers automatically after fault condition is removed within 50% ~100% rated output voltage,
1 . ~ 1 . V4 2 6 2 18.8 ~ 22.5V 30 ~ 36V
Protection type : Shut down o/p voltage, re-power on to recover
-30 ~ +70 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% -℃ R
±℃ ℃0.03%/ (0 ~ ) -45 R
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
2000 meters ()Note 4
According to EN62368,EN61558, EN50178,EN60664-1, EN62477-1 altitude up to 2000 metersⅢ;;
IEC62368-1, UL6 -1, U , TUV EN61558-2-16 a EN50178,
I/P-O/P: KVAC4
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH℃
Parameter
Conducted
Radiated
Harmonic Current
Voltage Flicker
EN55024, EN61000-6-2
Parameter
ESD
Radiated Susceptibility
EFT/Burest
Surge
Conducted
Magnetic Field
Voltage Dips and interruptions
536K hrs min. MIL-HDBK-217F (25℃)
105 54 5*90* . mm (W*H*D)
0.31Kg; 32pcs/11Kg/1.0CUFT
2368 L61010 , pproved; Design refer to TUV EN62368-1
()Note
HDR-1 0-155
15V
8.55A 5.31A
9 5.A
128.3W
142 5.W
120mVp-p
13 8.5 ~ 1 V
±1.0%
±1.0%
±1.0%
89. %5
H non condensing
H non condensing
Standard
EN55032(CISPR32)
EN55032(CISPR32)
6
EN61000-3-2
EN61000-3-3
Standard
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
HDR-150 series
HDR-1 0-245
24V
6 25.A
127.4W 130.6W
150W
150mVp-p
21 6 9. ~ 2 V
±1.0%
±1.0%
±1.0%
90. %5 9.%0 5
EAC TP TC 004
Test Level / Note
Class B
Class B (note 5)
Class A
-------
Test Level /Note
Level 3, 8KV air; Level 2, 4KV contact, criteriaA
Level 3, criteriaA
Level 3, criteriaA
Level 4,2KV/L-N, criteriaA
Level 3, criteriaA
Level 4, criteriaA
＞.95% dip 0 5 periods, 30% dip 25 periods,
95% interruptions 250 periods＞
μ
μ
HDR-1 0-485
48V
2.72A
3 2.A
153 6.W
2 0mVp-p0
43 2 55 2..~V
±1.0%
±1.0%
±1.0%
5 . ~ 6 . V6 5 4 8
File Name:HDR- 0-SPEC15 2019-06-26
Page 3
Block Diagram
150 Ultra Slim Step ShapeW DIN Rail
HDR-150 series
RECTIFIERS
FILTER
I/P
EMI
FILTER
Derating Curve VS Ambient Temperature
&
O.L.P.
POWER
SWITCHING
PWM
CONTROL
Output Derating VS Input Voltage
RECTIFIERS
&
FILTER
DETECTION
CIRCUIT
O.V.P.
+V
-V
100
80
60
50
40
LOAD (%)
20
-30 0 10 20 30 40 50 60 70 (VERTICAL)
AMBIENT TEMPERATURE ( )
45
100
95
90
85
80
75
70
60
50
LOAD (%)
40
85 10095 120110 160140 200180 240220 277
(for 12V/15V)
(for 24V/48V)
INPUT VOLTAGE (VAC) 60Hz
(operational)
File Name:HDR- 0-SPEC15 2019-06-26
Page 4
150 Ultra Slim Step ShapeW DIN Rail
Mechanical Specification
(Unit: mm , tolerance ± 0.5mm)
HDR-150 series
58.4
Power LED
3456
105
5.54
90
2
1
35
6.3 65
45.15
ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15
Terminal Pin No. Assignment
Pin No.
1
2
Assignment
AC/N
AC/L
Pin No.
3,4
5,6
Assignment
-V
+V
Installation Manual
Please refer to : http://www.meanwell.com/manual.html
File Name:HDR- 0-SPEC15 2019-06-26
Loading...