MEANWELL ELG-75-36AB-3Y Datasheet

(for DA-Type only)

48~75W Constant Voltage + Constant Current LED Driver

110

MM

SELV

IP65

IP67

Type HL

ELG-75 series

8

(for 12B/24B/36A/42A/48Aonly)

■ Features ■ Applications

Constant Voltage + Constant Current mode output
Metal housing design with functional Ground
Built-in active PFC function
Class 2 power unit
 <0.5WNo load / Standby power consumption
IP67 / IP65 rating for indoor or outdoor installations

LED street lighting
LED architectural lighting
LED bay lighting
LED floodlighting
Type HL for use in Class I, Division 2

hazardous (Classified) location.

Function options: output adjustable via potentiometer;

3 in 1 dimming (dim-to-off); Smart timer dimming; DAL

I

Typical lifetime>50000 hours
5 years warranty

IS 15885(Part 2/Sec13)

THOMAS SAMUEL

THOMAS SAMUEL

R-41027766

■ Description

ELG-75 series is a 75W AC/DC LED driver featuring the dual mode constant voltage and
constant current output. ELG-75 operates from 100 305VAC and offers models with different～
rated voltage ranging between 12V and 48V. Thanks to the high efficiency up to 90%, with the
fanless design, the entire series is able to operate for -40 ~ +85 case temperature under free℃℃
air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series

to fit both indoor and outdoor applications. ELG-75 is equipped with various function options, such as
dimming methodologies, so as to provide the optimal design flexibility for LED lighting system

■ Model Encoding

Type

Blank

A

B

AB IP65

DA

Dx

D2

IP Level

IP67
IP65
IP67

IP67
IP67
IP67

-24ELG - 75

Io and Vo fixed.

Io and Vo adjustable through built-in potentiometer.
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
Io and Vo adjustable through built-in potentiometer &

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
DALI control technology.
Built-in Smart timer dimming function by user request.
Built-in Smart timer dimming and programmable function.

A

-

Input wiring type

Function mode option

Rated output voltage(12/24/36/42/48V)
Rated wattage

Series name

Function Note

Blank:2-wire input for standard model

{

3Y:3-wire input for standard model

File Name:ELG-75-SPEC 2018-09-30

In Stock
In Stock
In Stock

In Stock

In Stock

By request

In Stock

SPECIFICATION

MODEL

DC VOLTAGE

CONSTANT CURRENT REGION

RATED CURRENT

RATED POWER

RIPPLE & NOISE (max.)

VOLTAGE ADJ. RANGE

OUTPUT

CURRENT ADJ. RANGE

VOLTAGE TOLERANCE

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD UP TIME (Typ.)

VOLTAGE RANGE

FREQUENCY RANGE

POWER FACTOR

TOTAL HARMONIC DISTORTION

INPUT

PROTECTION

ENVIRONMENT

SAFETY &

EMC

NOTE

EFFICIENCY (Typ.)

AC CURRENT

INRUSH CURRENT(Typ.)

MAX. No. of PSUs on 16A
CIRCUIT BREAKER

LEAKAGE CURRENT

NO LOAD / STANDBY
POWER CONSUMPTION

OVER CURRENT

SHORT CIRCUIT

OVER VOLTAGE

OVER TEMPERATURE

WORKING TEMP.

MAX. CASE TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

SAFETY STANDARDS

DALI STANDARDS

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

EMC EMISSION

EMC IMMUNITY
MTBF

DIMENSIONOTHERS

PACKING

1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current ℃

2. Please refer to "DRIVING METHODS OF LED MODULE".

3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

4. Tolerance : includes set up tolerance, line regulation and load regulation.

5. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details

6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.

7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

8. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70 or less.℃

9. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com

10.The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

11.For any application note and IP water proof function installation caution, please refer our user manual before using.

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

48~75W Constant Voltage + Constant Current LED Driver

Note.5

Note.6

Note.5

ELG-75-12

12V

6 ~ 12V

Note.2

5A

200VAC ~ 305VAC

60W

100VAC ~ 180VAC

48W

150mVp-p

Note.3

Adjustable for A/AB-Type only (via built-in potentiometer)

10.8 ~ 13.2V

Adjustable for A/AB-Type only (via built-in potentiometer)

2.5 ~ 5A

±3.0%

Note.4

±0.5%
±2.0%

500ms, 100ms/115VAC, 230VAC

10ms/ 230VAC 10ms/ 115VAC(at full load)

100 ~ 305VAC 142 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

47 ~ 63Hz

PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load≧≧≧
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

THD< 20%(@load 50%/115VC,230VAC; @load 75%/277VAC)≧≧
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

85%

0.7A / 115VAC 0.45A / 230VAC 0.38A/277VAC

COLD START 50A(twidth=350 s measured at 50% Ipeak) at 230VACμ;Per NEMA410

5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC

<0.75mA / 277VAC

No load power consumption <0.5W for Blank /A/ Dx / D2-Type
Standby power consumption <0.5W for B / AB / DA-Type

95 ~ 108%

Constant current limiting, recovers automatically after fault condition is removed

Hiccup mode, recovers automatically after fault condition is removed

14 ~ 18V

Shut down output voltage, re-power on to recover

Shut down output voltage, re-power on to recover

Tcase=-40 ~ +85 (Please refer to “ OUTPUT LOAD vsTEMPERATURE” section)℃

Tcase=+85℃
20 ~ 95% RH non-condensing

-40 ~ +80 , 10 ~ 95% RH℃

±℃ ℃0.03%/ (0 ~ 60 )

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

UL8750 independent, EN62384;(type”HL”), CSA C22.2 No. 250.13-12; IEC/EN/AS/NZS 61347-1, IEC/EN/AS/NZS 61347-2-13

K 61347-1,K 61347-2-13C C approved

Compliance to IEC62386-101, 102, 207 for DA-Type only

I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

Compliance to

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level ( )surge immunity Line-Earth 6KV, Line-Line 4KV ;

1172K hrs min. Telcordia SR-332 (Bellcore) 331Khrs min. MIL-HDBK-217F (25 )℃

180 63**35.5mm (L*W*H)

0.8Kg;16pcs/13.4Kg/0.67CUFT

EN55015,EN61000-3-2 Class C (@load 50%) ; EN61000-3-3;≧ GB17743, GB17625.1;EAC TPTC 020; KC KN15,KN61547

ELG-75-24

24V

12 ~ 24V

3.15A

75.6W

60W

200mVp-p

21.6 ~ 26.4V

1.57 ~ 3.15A

±3.0%

±0.5%
±1.0%

88%

28 ~ 34V

ELG-75-36

36V

18 ~ 36V

2.1A

75.6W

60W

250mVp-p

32.4 ~ 39.6V

1.05 ~ 2.1A
±2.5%

±0.5%
±1.0%

89%

41 ~ 48V

;IP65 or IP67; ;EAC TP TC 004;BIS IS15885(for 12B/24B/36A/42A/48A only) GB19510.1, GB19510.14

ELG-75 series

ELG-75-42

42V

21 ~ 42V

1.8A

75.6W

60W

250mVp-p

37.8 ~ 46.2V

0.9 ~ 1.8A

±2.5%

±0.5%
±0.5%

90%

47 ~ 54V

ELG-75-48

48V

24 ~ 48V

1.6A

76.8W

60W

250mVp-p

43.2 ~ 52.8V

0.8 ~ 1.6A

±2.0%

±0.5%

±0.5%

90%

54 ~ 62V

EAC TP TC 020; KC KN15 KN61547,

File Name:ELG-75-SPEC 2018-09-30

Block Diagram

48~75W Constant Voltage + Constant Current LED Driver

ELG-75 series

PFC fosc : 50~120KHz

PWM fosc : 60~130KHz

I/P

EMI FILTER

&

RECTIFIERS

PFC

CIRCUIT

O.L.P.O.T.P.

CASE :Protective Earth

POWER

SWITCHING

PWM & P FC

CONTROL

DRIVING METHODS OF LED MODULE

※ This series is able to work in either Constant Current mode (a direct drive way) or

Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

100

Vo(%)

50

(min.)

(A)

Constant

V areaoltage

(B)

Constant

Current area

(C)

Hiccup

Protection

In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.

Should there be any compatibility issues, please contact MEAN WELL.

RECTIFIERS

&

FILTER

Vo+
Vo-

O.L.P.

DETECTION

CIRCUIT

O.V.P.

50

Typical output current normalized by rated current (%)

100

Io(%)

File Name:ELG-75-SPEC 2018-09-30

48~75W Constant Voltage + Constant Current LED Driver

ELG-75 series

DIMMING OPERATION

AC/N(Blue)
AC/L(Brown)

※ 3 in 1 dimming function (for B/AB-Type)

Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:

0 ~ 10VDC, or 10V PWM signal or resistance.

Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
Dimming source current from power supply: 100 A (typ.) μ

◎ Applying additive 0 ~ 10VDC

+

Vo+

-

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

+

Additive Voltage

-

+

-

ELG-75

100%

90%

80%

70%

60%

50%

40%

Output current (%)

30%

20%

10%

0%

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

Dimming input:Additive voltage

DIM+( )*Blue
DIM-(White)**
Vo-(Black)
Vo+(Red)

* DIM + for B/A B-Type

DA+ for DA-Type
PROG+ for D2-Type

* *DIM- for B/AB-Type

DA- for DA-Type
PROG- for D2-Type

◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

+

Vo+

-

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

Additive PWM signal

+

-

◎ Applying additive resistance:

+

Vo+

-

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

Additive Resistance

+

-

Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< out<8%.I

2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.Ω

100%

90%

80%

70%

60%

50%

40%

Output current (%)

30%

20%

10%

0%

0%

10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Duty cycle of additive 10V PWM signal dimming input

100%

90%

80%

70%

60%

50%

40%

Output current (%)

30%

20%

10%

0%

Short

10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N

(N=driver quantity forsynchronized )dimming operation

Dimming input:Additive resistance

File Name:ELG-75-SPEC 2018-09-30

48~75W Constant Voltage + Constant Current LED Driver

※ DAL Interface (primary side; for DA-Type)I
Apply DALI signal between DA+ and DA-.

DAL protocol comprises 16 groups and 64 addresses. I
First step is fixed at 8% of output.

※ Smart timer dimming function (for Dxx-Type by User definition)

MEAN WELLSmart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14
consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,
please contact MEAN WELL for details.

Ex : D01-Type: the profile recommended for residential lighting◎

Set up for D01-Type in Smart timer dimming software program:

ELG-75 series

T1

TIME**

LEVEL**

Dimming Level(%)

Operating Time(HH:MM)

**: TIME matches Operating Time in the diagram whereas LEVELmatches Dimming Level.

Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100% starting from 6:00pm.
[2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.

The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.

Ex: D02-Type: the profile recommended for street lighting◎

Set up for D02-Type in Smart timer dimming software program:

06:00

100% 70%

T1

T2

T2

07:00

T3

T3

11: 00

50%

T4

---

70%

T4 T5

TIME**

LEVEL**

Dimming Level(%)

Operating Time(HH:MM)

**: TIME matches Operating Time in the diagram whereas LEVELmatches Dimming Level.
Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:
[1] The power supply will switch to the constant current level at 50% starting from 5:00pm.
[2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.
[5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The

constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

01:00

03:00

80%50%

8:00 11:00

100%

60% 80%

File Name:ELG-75-SPEC 2018-09-30

---

Ex: D03-Type: the profile recommended for tunnel lighting◎

48~75W Constant Voltage + Constant Current LED Driver

Set up for D03-Type in Smart timer dimming software program:

T1 T2 T3

ELG-75 series

TIME** 01:30

Dimming Level(%)

Operating Time(HH:MM)

**: TIME matches Operating Time in the diagram whereas LEVELmatches Dimming Level.
Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance:
[1] The power supply will switch to the constant current level at 70% starting from 4:30pm.
[2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on.
[3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

LEVEL** 70% 100% 70%

11:00 ---

File Name:ELG-75-SPEC 2018-09-30

70

72

74

76

78

80

82

84

86

88

90

92

10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

277V（75W）

230V（75W）

115V（60W）

48~75W Constant Voltage + Constant Current LED Driver

0.3

0.35

0.4

0.45

0.5

0.55

0.6

0.65

0.7

0.75

0.8

0.85

0.9

0.95

1

10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

277V

230V

115V

OUTPUT LOAD vs TEMPERATURE(Note.9)

ELG-75 series

100

80

230VAC

input only

60

40

LOAD (%)

20

-40 -25 0-10 15 30 50 60 70

AMBIENT TEMPERATURE,Ta ( )℃

STATIC CHARACTERISTIC

100

90

80

70

60

50

LOAD (%)

40

(HORIZONTAL)

100

80

230VAC

input only

60

40

LOAD (%)

20

-40-250 204555657585

Tcase ( )℃

POWER FACTOR (PF) CHARACTERISTIC

※ Tcase at 75℃

Constant Current Mode

PF

(HORIZONTAL)

100 120 140 160 180 200 240 250 260 270 280 305

INPUT VOLTAGE (V) 60Hz

※De-rating is needed under low input voltage.

TOTAL HARMONIC DISTORTION (THD)

※ 48V Model, Tcase at 75℃

18%

16%

14%

12%

10%

THD

8%

6%

4%

2%

0%

50% 60% 70% 80% 90% 100%

LOAD

277V（75W）

230V（75W）

115V（60W）

LOAD

EFFICIENCY vs LOAD

ELG-75 series possess superior working efficiency that up to 90% can
be reached in field applications.

※ 48V Model, Tcase at 75℃

EFFICIENCY(%)

LOAD

File Name:ELG-75-SPEC 2018-09-30

0

20

40

60

80

100

120

20 30 40 50 60 70 80 90

LIFE TIME

48~75W Constant Voltage + Constant Current LED Driver

LIFETIME(Kh)

Tc a s e ()

℃

ELG-75 series

File Name:ELG-75-SPEC 2018-09-30

48~75W Constant Voltage + Constant Current LED Driver

Mechanical SpecificationMechanical Specification

※ Blank-Type

AC/N(Blue)

AC/L(Brown)

SJOW 17AWGx2C
&H05RN-F 1.0mm

ELG-75 series

CASE NO.: 243A Unit:mm

180

169

156

2

4- 4.5ψ

tc

 : Max. Case Temperature

tc

20

85

63

45.8

SJOW 17AWGx2C

&05RN-F 1.0mm

35

35.5

300±20300±20

Vo-(Black)
Vo+(Red)

2

※ A-Type

AC/N(Blue)

AC/L(Brown)

300±20

SJOW 17AWGx2C
&H05RN-F 1.0mm

180

169

156

2

4- 4.5ψ

tc

 : Max. Case Temperature

tc

20

85

63

45.8

SJOW 17AWGx2C
&05RN-F 1.0mm

35

35.5

300±20

Vo-(Black)
Vo+(Red)

2

44.25

21

30.25

File Name:ELG-75-SPEC 2018-09-30

※ AB-Type

AC/N(Blue)
AC/L(Brown)

48~75W Constant Voltage + Constant Current LED Driver

180

169

300±20

SJOW 17AWGx2C
&H05RN-F 1.0mm

2

4- 4.5ψ

tc

 : Max. Case Temperature

156

tc

20

85

ELG-75 series

300±20

UL2517 20AWGx2C

63

45.8

SJOW 17AWGx2C
&05RN-F 1.0mm

35

35.5

2

DIM+( )Blue
DIM-(White)

Vo-(Black)
Vo+(Red)

※ B/DA/D2-Type

AC/N(Blue)
AC/L(Brown)

300±20

SJOW 17AWGx2C
&H05RN-F 1.0mm

21

30.25

44.25

180

169

156

2

4- 4.5ψ

tc

 : Max. Case Temperature

tc

20

85

300±20

UL2517 20AWGx2C

63

45.8

SJOW 17AWGx2C
&05RN-F 1.0mm

35

35.5

2

DIM+( )*Blue
DIM-(White)**

Vo-(Black)
Vo+(Red)

* DIM + for B-Ty pe

DA+ for DA-Type
PROG+ for D2-Type

* *DIM- for B-Type

DA- for DA-Type
PROG- for D2-Type

File Name:ELG-75-SPEC 2018-09-30

48~75W Constant Voltage + Constant Current LED Driver

※ 3Y Model (3-wire input)

180

169

300±20

AC/N(Blue)
AC/L(Brown)

PE (Green/Yellow)

SJOW 17AWGx3C
&H05RN-F 1.0mm

2

4- 4.5ψ

tc

 : Max. Case Temperature

◎ Note1: Please connect the case to PE for the complete EMC deliverance and safety use.
◎ Note2: Please contact MEAN WELL for input wiring option with PE.

156

tc

20

ELG-75 series

63

45.8

85

SJOW 17AWGx2C
&05RN-F 1.0mm

2

Installation Manual

Please refer to : http://www.meanwell.com/manual.html

File Name:ELG-75-SPEC 2018-09-30